Subscribe

Get-NcAggr Provides different Output when run from script

Getting different output when I run Get-NcAggr froma Powershell prompt VS. a PS1 script.  I'd like to get the short version or a custom output of: Name, TotalSize, Used, Available - having a lot of trouble getting the -Attributes switch to work with any values.

When I run Get-NcAggr from a Powershell Window against I get the following output>

Name                  State   TotalSize  Used  Available Disks RaidType    RaidSize  Volumes
----                  -----   ---------  ----  --------- ----- --------    --------  -------
usbo_pfsx_cf01a_aggr0 online     2.2 TB   95%   103.9 GB   3   raid_dp, normal14       1
usbo_pfsx_cf01a_sas_aggr1 online    40.4 TB0%40.3 TB  94   raid_dp, normal19      14
usbo_pfsx_cf01b_aggr0 online     2.2 TB   95%   103.9 GB   3   raid_dp, normal14       1
usbo_pfsx_cf01b_sata_a... online   139.4 TB0%   139.4 TB  72   raid_dp, normal18      13
usbo_pfsx_cf01b_sata_a... online   104.6 TB0%   104.6 TB  54   raid_dp, normal18       0

When I run it from a script I get a lot more information >

Aggr64bitUpgradeAttributes : DataONTAP.C.Types.Aggr.Aggr64bitUpgradeAttributes

AggregateName              : usbo_pfsx_cf01b_sata_aggr1

AggregateUuid              : 0d17aabf-0109-11e2-8182-123478563412

AggrFsAttributes           : DataONTAP.C.Types.Aggr.AggrFsAttributes

AggrInodeAttributes        : DataONTAP.C.Types.Aggr.AggrInodeAttributes

AggrOwnershipAttributes    : DataONTAP.C.Types.Aggr.AggrOwnershipAttributes

AggrPerformanceAttributes  : DataONTAP.C.Types.Aggr.AggrPerformanceAttributes

AggrRaidAttributes         : DataONTAP.C.Types.Aggr.AggrRaidAttributes

AggrSnaplockAttributes     : DataONTAP.C.Types.Aggr.AggrSnaplockAttributes

AggrSnapmirrorAttributes   : DataONTAP.C.Types.Aggr.AggrSnapmirrorAttributes

AggrSnapshotAttributes     : DataONTAP.C.Types.Aggr.AggrSnapshotAttributes

AggrSpaceAttributes        : DataONTAP.C.Types.Aggr.AggrSpaceAttributes

AggrStripingAttributes     :

AggrVolumeCountAttributes  : DataONTAP.C.Types.Aggr.AggrVolumeCountAttributes

AggrWaflironAttributes     :

Name                       : usbo_pfsx_cf01b_sata_aggr1

NcController               : usbo-pfsx-cf01.customer.com

Nodes                      : {usbo-pfsx-cf01b}

StripingType               : not_striped

State                      : online

TotalSize                  : 153321851584512

Used                       : 0

Available                  : 153241115541504

Disks                      : 72

RaidType                   : raid_dp, normal

RaidSize                   : 18

Volumes                    : 13

Re: Get-NcAggr Provides different Output when run from script

Check out this thread.