Network and Storage Protocols

cannot create CIFS vserver

RPHELANIN
9,651 Views

hi All

i am trying to create a cifs vserver on a simulator (8.1.2) but getting an error on the time difference

Error: Machine account creation procedure failed

  [     3] Loaded the preliminary configuration.

  [    42] Created a machine account in the domain

  [    42] Connecting to LSA server dc1.test.local (10.1.1.1)

**[   264] FAILURE: Cluster and Domain Controller times differ by

**         more than the configured clock skew

  [   264] Unable to connect to dc1.test.local through the

           10.1.1.113 interface

  [   265] No servers available for MS_LSA, vserver: 2, domain:

           test.local.

  [   265] Could not find Windows SID

           'S-1-5-21-829917675-1945359377-2743707139-512'

Error: command failed: Failed to create the Active Directory machine account "BACKUP". Reason: SecD Error: no server available.

both the controller and DC are the same time so not sure ehy i am gettting this error.

any suggestions?

1 ACCEPTED SOLUTION

RPHELANIN
9,651 Views

Scot, spun a new VM and promoted it to DC and then added my cifs vserver.

thanks for hte help

View solution in original post

6 REPLIES 6

scottgelb
9,651 Views

Is the time zone different?  Maybe it shows the same time but in a different time zone, so the actual time is different.

RPHELANIN
9,652 Views

Scot there all set to UTC

Sent from my iPhone

On 21 May 2014, at 17:45, Scott Gelb <xdl-communities@communities.netapp.com>

scottgelb
9,652 Views

How many network interfaces on the SVM and is routing setup?

net int show -vserver vsname

net routing-group route show -vserver vsname

RPHELANIN
9,652 Views

hi scott, all this is on my test lab and all is on a 10.1.1.x network. Below is thncme output:

cluster1::> net int show

  (network interface show)

            Logical    Status     Network            Current       Current Is

Vserver     Interface  Admin/Oper Address/Mask       Node          Port    Home

----------- ---------- ---------- ------------------ ------------- ------- ----

cluster1

            cluster_mgmt up/up    10.1.1.70/24       cluster1-01   e0b     true

cluster1-01

            cluster1-01_intercluster_lif1

                         up/up    10.1.1.2/24        cluster1-01   e0a     true

            mgmt1        up/up    10.1.1.71/24       cluster1-01   e0d     true

prod

            cifs       down/down  10.1.1.103/24      cluster1-01   e0b     true

            data_lif1    up/up    10.1.1.102/24      cluster1-01   e0a     true

            prod_admin_lif1

                         up/up    10.1.1.101/24      cluster1-01   e0a     true

6 entries were displayed.

cluster1::> net routing-groups show

  (network routing-groups show)

          Routing

Vserver   Group     Subnet          Role         Metric

--------- --------- --------------- ------------ -------

cluster1

          c10.1.1.0/24

                    10.1.1.0/24     cluster-mgmt      20

cluster1-01

          i10.1.1.0/24

                    10.1.1.0/24     intercluster      40

          n10.1.1.0/24

                    10.1.1.0/24     node-mgmt         10

prod

          d10.1.1.0/24

                    10.1.1.0/24     data              20

4 entries were displayed.

cluster1::>

RPHELANIN
9,652 Views

Scot, spun a new VM and promoted it to DC and then added my cifs vserver.

thanks for hte help

sshajahan
6,387 Views

Hi All,

 

Greetings,

 

I am facing same issue, kindly give me detail info to fix this issue.

 

Thanks!!

 

 

 

 

 

Regards;

 

Shajahan


@RPHELANIN wrote:

Scot, spun a new VM and promoted it to DC and then added my cifs vserver.

thanks for hte help


 

Public