2013-01-26 04:31 PM
I'm trying to work out if this is possible:
Filerone has a volume called 'vmware'
Filertwo has a volume called 'vmware_snap'
Snapmirror is working and all good
How can I tell the vfiler dr configure command that the volume it's looking for is vmware_snap and not vwmare?
it looks like it's -a but it doesn't work so I'm a little stumped. If it's not possible then that'll certainly answer it.
vfiler dr configure [-l remote_login:remote_passwd]
[-e interfacename:<ipv4-address | [ipv6-address]>:<netmask | prefixlen>,...]
[-d <DNS-server-ipv4-address | [DNS server-ipv6-address]>:...]
[-n <NIS-server-ipv4-address | [NIS server-ipv6-address]>:...]
[-s] [-a alt-src,alt-dst]
2013-01-27 06:11 PM
The volumes must be the same name on the source and target system (also the IPspace must be the same -- even if different networks the network assigned to the same IPspace name). If you have a duplicate volume name issue on the target contorller, then we usually rename the source and target to the same unique name "vfiler_volname" for example... that can affect some shares/mounts... cifs shares will point to the new target automatically and if nfs autoexport is set it will update /etc/exports for the rename - although nfs clients will need to remount to the new target /vol/volname ... or as a workaround to not have to change the client use the "-actual" option in exports to keep the mount point name the same old volume name which points to a renamed volume.