Subscribe

Adjust alarm thresholds

Is there anyway to adjust an alarm? 

I only create one lun per volume.  So i purposly make the volume and the lun almost the same size.  Oncommand really hates when i do this and i would like to adjust the no space limit if at all possible.

Re: Adjust alarm thresholds

You can modify the severity of the event using dfm eventtype modify.

Regards

adai

Re: Adjust alarm thresholds

And you can also modify the threshold for the alarm per volume.

dfm volume set <volume> volNearlyFullThreshold=<value>

dfm volume set <volume> volFullThreshold=<value>

Re: Adjust alarm thresholds

Hi Pascal,

     Yes you can do that. Individual volume threshold take precedence than global volume thresholds.

Regards

adai

Re: Adjust alarm thresholds

Thanky you all for the suggestions.  I think i found it.

DFM > options > defaut thresholds > change the percentage from 90% to 95%. 

I believe this puts a global threshold on which is what i am after.  Thanks again for all the help.