2013-10-23 01:50 AM
error being shown on the controller:
Wed Oct 23 10:02:51 IST [cvstorage2: HTTPPool00:warning]: HTTP XML Authentication failed from <vCenter server IP>
I was receiving the same error msg from the DFM server as well and already set the new password there by using the dfm host set CLI, what should I do regarding the vCenter? how do I set the new password ?
2013-10-23 07:22 AM
OCHP can be installed on the UM server, the vCenter server (preferably the one it is associated with), or any other Windows server.
Look for a "NetApp" folder under the Start Menu -> All Programs locations with "OnCommand Host Service PowerShell" under it.
2013-10-24 05:51 AM
I am not familiar with VSC and am not certain if the following is VSC version dependent.
This is from the VSC 4.2.1 admin guide - I hope it helps you modify the controller password:
VSC uses credentials (user name and password) that you set up in Monitoring and Host
Configuration to authenticate each storage system and determine which storage operations can be
performed on that storage system. VSC uses one set of credentials for each storage system. These
credentials determine all VSC tasks that can be performed on that storage system; in other words, the
credentials are for VSC, not an individual VSC user.
When Monitoring and Host Configuration adds a storage system, it displays a pop-up box that lists
the credentials associated with the username/ password pair you entered when you logged in. You
can either set up default credentials that Monitoring and Host Configuration will use during its
storage system discovery process or manually enter credentials when the storage system is