Active IQ Unified Manager Discussions

BUG or FEATURE?

h_schneider
7,398 Views

HI folks,

I have a strange behavior with our FAS 3210HA and System manager 2.0R1.

If I try to enable FC/FCOE ......

but fcp is licensed AND is running....

if I remove the FCP license via CLI and add it via System manager -> same issue

seen with System manager 2.0R1 and Ontap 8.1RC1 and RC2

thx

13 REPLIES 13

vmsjaak13
7,378 Views

Hello,

try:

options licensed_feature.fcp.enable on

Regards,

Niek

h_schneider
7,378 Views

Hello Niek,

tryed this....

NetApp05> options licensed_feature.fcp.enable on

For this platform, a license is required to use this feature.

NetApp05>

but FCP IS licensed and running

NetApp05> fcp status

FCP service is running.

NetApp05>

Regards,

Harald

scottgelb
7,378 Views

Odd... are FC target ports available?  Does "fcp show adapters" show any targets and are any of the onboard ports in target mode with "fcadmin config"?  FCP is enabled on both nodes with the same wwn?  fcp nodename?

h_schneider
7,378 Views

Hi Scott,

i can configure the whole FCP stuff through the CLI - it works and my VM Server is consuming a lun from this storage.

i can not manage FCP via the System manager Interface.

by the side, i did tests with Ontap 8.1RC1 and 8.1 RC2 - i am not able to test with 8.0.x

Regards

tsentekin
7,378 Views

ONTAP 8.1RC2 with OnCommand 2.0R1

here i have the same issues,

"options licensed_feature.fcp.enable on"

gives me the same error;

"For this platform, a license is required to use this feature."

but i have fc-iscsi licenses enabled and serving luns for esx servers



pedro_rocha
7,378 Views

Same for me guys... even started another thread about the same issue when I did not see this one.

Any update?

Regards,

Pedro Rocha.

karthikv
7,378 Views

We are working on workaround/fix for the above licensing issue. Please use cli till we have a workaround/fix.

We will communicate once the workaround/fix is ready.

Thanks,

Karthik

h_schneider
7,378 Views

Any timeline ?

Regards

Von: karthikv

Gesendet: Tuesday, January 03, 2012 06:17 AM

An: Schneider, Harald

Betreff: - Re: BUG or FEATURE?

NetApp Online Community <https://communities.netapp.com/index.jspa>

<http://media.netapp.com/images/divider-600x3.jpg>

Re: BUG or FEATURE?

created by karthikv <https://communities.netapp.com/people/karthikv> in OnCommand System Manager - View the full discussion <https://communities.netapp.com/message/70807#70807> <http://media.netapp.com/images/divider-600x3.jpg>

We are working on workaround/fix for the above licensing issue. Please use cli till we have a workaround/fix.

We will communicate once the workaround/fix is ready.

Thanks,

Karthik

Reply to this message by replying to this email -or- go to the message on NetApp Community <https://communities.netapp.com/message/70807#70807>

Start a new discussion in OnCommand System Manager by email <mailto:discussions-community-products_and_solutions-storage_management_software-oncommand_system_manager@netappcommunity.hosted.jivesoftware.com> or at NetApp Community <https://communities.netapp.com/choose-container.jspa?contentType=1&containerType=14&container=3163>

brandon_odell
7,378 Views

I ran across the exact same issue today as well. 8.1 RC2 on a 3240 with System Manager 2.0R1. A tentative ETA would be helpful as my customers are not very proficient with the CLI.

WillFulmer
6,530 Views

Following up - any more information on this bug. New FAS2240's shipping with 8.1 and this is NEEDED!

amritad
6,530 Views

Hi Everyone,

sorry for the delay in updating you on this. We are working on a patch for fixing this issue. Qualification and legal formalities are in progress. The patch should be available by early next week. We will send out a message on communities announcing the same.

REgards

Amrita

vmsjaak13
6,530 Views

Looks like it's available already at: https://now.netapp.com/NOW/download/software/systemmgr_win/2.0R1D1/

Regards,

Niek Baakman

karthikv
6,530 Views

The patch has been published, however the Access a Specific release will not be fully functional for this particular patch (a ticket has been raised and will be resolved soon).

In the meantime, please use these links:

https://now.netapp.com/NOW/download/software/systemmgr_lin/2.0R1D1/

https://now.netapp.com/NOW/download/software/systemmgr_win/2.0R1D1/

This is a patch release for the licensing issue. It is advised that only those customers who are hitting the above issue install this patch.

Thanks,

Karthik

Public