Subscribe

Connect-WFAController started failing ( WFA 3.1.0.0.P1 )

Credentials were double checked working and valid. But the use of Connect-WFAController on 7mode equipment throws the following error 100% of the time:

 

Log messages:

Get-WfaCredentials -Host pirulo.com

Credentials successfully provided for 'pirulo.com'         ( and double checked!! )

Connect-NaController ( with credentials ) -name pirulo.com -Timeout 60000 -ErrorAction Stop -HTTPS

ERROR Failed to connect to controller : pirulo.com

ERROR Failed executing command. Exception : failed to connected to controller : pirulo.com  

 

 

Tried a POSH script importing the OnTap WFA module in the WFA server and the Connect-NaController command worked!

 

Therefore I believe the problem is within WFA, it started happening on Friday on all the 7mode controllers. Any thoughts ?

 

Thanks in advance!!

Re: Connect-WFAController started failing ( WFA 3.1.0.0.P1 )

"workflow fails to connect to a 7-Mode filer after MS KB’s were applied to the Host OS"

 

A similar issue was observed recently by another customer. Just wanted to know if any MS KB's were applied

and post that if you are seeing this issue.

 

Regards

Abhi

Re: Connect-WFAController started failing ( WFA 3.1.0.0.P1 )

Re: Connect-WFAController started failing ( WFA 3.1.0.0.P1 )

@trentino123

 

Have you been able to resolve this??

 

sinhaa

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.