Active IQ Unified Manager Discussions

Error in DFM after instal symantec Plug-in

ORONA_MIKEL
5,630 Views

Hi

Error in DFM after instal symantec Plug-in

We had the DFM grafics performance. We instaled the symantec plug-in and this work ok but the dfm performace no change.

We saw the free space error so we have changed the database to other disk but the error is not correct

>dfm about

Version                          5.2.0.16233 (5.2)

Executable Type                  64-bit

Serial Number                    1-50-142016

Edition                          Standard edition of DataFabric Manager server

Data ONTAP Operating Mode        7-Mode

Administrator Name               \administrador

Host Name                        xxxxxxxx

Host IP Address                  10.200.100.204

Host Full Name                   hesw146

Node limit                       250 (currently managing 😎

Operating System                 Microsoft Windows Server 2008 R2  (Build 7600)x64 based

CPU Count                        1

System Memory                    4095 MB (load: 53%)

Installation Directory           C:/Program Files/NetApp/DataFabric Manager/DFM                                 Error: 1.93 GB free (7.7%)

Perf Data Directory              C:/Program Files/NetApp/DataFabric Manager/DFM/perfdata

Data Export Directory            C:/Program Files/NetApp/DataFabric Manager/DFM/dataExport

Database Backup Directory        C:\Program Files\NetApp\DataFabric Manager\DFM\data

Reports Archival Directory       C:\Program Files\NetApp\DataFabric Manager\DFM\reports

Licensed Features                DataFabric Manager server: installed

Installed Plugins                Storage System Config 6.5.1 (6.5.1) - storage systems and vFilers

                                 Storage System Config 6.5.2 (6.5.2) - storage systems and vFilers

                                 Storage System Config 6.5.3 (6.5.3) - storage systems and vFilers

                                 Storage System Config 6.5.4 (6.5.4) - storage systems and vFilers

                                 Storage System Config 6.5.5 (6.5.5) - storage systems and vFilers

                                 Storage System Config 6.5.6 (6.5.6) - storage systems and vFilers

                                 Storage System Config 6.5.7 (6.5.7) - storage systems and vFilers

                                 Storage System Config 7.0 (7.0.0.1) - storage systems and vFilers

                                 Storage System Config 7.0.1 (7.0.1.1) - storage systems and vFilers

                                 Storage System Config 7.0.2 (7.0.2) - storage systems and vFilers

                                 Storage System Config 7.0.3 (7.0.3) - storage systems and vFilers

                                 Storage System Config 7.0.4 (7.0.4) - storage systems and vFilers

                                 Storage System Config 7.0.5 (7.0.5) - storage systems and vFilers

                                 Storage System Config 7.0.6 (7.0.6) - storage systems and vFilers

                                 Storage System Config 7.0.7 (7.0.7) - storage systems and vFilers

                                 Storage System Config 7.1 (7.1.0.1) - storage systems and vFilers

                                 Storage System Config 7.1.1 (7.1.1.1) - storage systems and vFilers

                                 Storage System Config 7.1.2 (7.1.2.1) - storage systems and vFilers

                                 Storage System Config 7.1.3 (7.1.3) - storage systems and vFilers

                                 Storage System Config 7.2 (7.2) - storage systems and vFilers

                                 Storage System Config 7.2.1 (7.2.1.1) - storage systems and vFilers

                                 Storage System Config 7.2.2 (7.2.2) - storage systems and vFilers

                                 Storage System Config 7.2.3 (7.2.3) - storage systems and vFilers

                                 Storage System Config 7.2.4 (7.2.4) - storage systems and vFilers

                                 Storage System Config 7.2.5 (7.2.5.1) - storage systems and vFilers

                                 Storage System Config 7.2.6 (7.2.6.1) - storage systems and vFilers

                                 Storage System Config 7.2.7 (7.2.7) - storage systems and vFilers

                                 Storage System Config 7.3 (7.3) - storage systems and vFilers

                                 Storage System Config 7.3.1 (7.3.1.1) - storage systems and vFilers

                                 Storage System Config 7.3.2 (7.3.2) - storage systems and vFilers

                                 Storage System Config 7.3.3 (7.3.3) - storage systems and vFilers

                                 Storage System Config 7.3.4 (7.3.4) - storage systems and vFilers

                                 Storage System Config 7.3.5 (7.3.5.1) - storage systems and vFilers

                                 Storage System Config 7.3.6 (7.3.6) - storage systems and vFilers

                                 Storage System Config 7.3.7 (7.3.7) - storage systems and vFilers

                                 Storage System Config 8.0 (8.0) - storage systems and vFilers

                                 Storage System Config 8.0.1 (8.0.1) - storage systems and vFilers

                                 Storage System Config 8.0.2 (8.0.2) - storage systems and vFilers

                                 Storage System Config 8.0.3 (8.0.3) - storage systems and vFilers

                                 Storage System Config 8.0.4 (8.0.4) - storage systems and vFilers

                                 Storage System Config 8.1 (8.1) - storage systems and vFilers

Warning: Low disk space in the DFM install volume is causing monitoring to stop!

Make more space available or lower the monMinFreePercent DFM option!

C:\>dfm datastore setup D:\DFM_Database

Creating the destination data directories.

Required space for data:5.50 GB, Available space:36.1 GB

Stopping all services and jobs...

Copying database files to D:\DFM_Database\data.

2 archivo(s) copiado(s)

Copying perf data files to D:\DFM_Database\perfdata.

912 archivo(s) copiado(s)

Copying script output files to D:\DFM_Database\script-plugins.

Copying report output files to D:\DFM_Database\reports.

93 archivo(s) copiado(s)

Copying plugins files to D:\DFM_Database\plugins.

144 archivo(s) copiado(s)

Copying key file to D:\DFM_Database\conf\keys.

7 archivo(s) copiado(s)

Changing database configuration settings ...

Changed dbDir to D:\DFM_Database\data.

Updated dbLogDir to D:\DFM_Database\data.

Starting sql service...

Changed perfArchiveDir to D:\DFM_Database\perfdata.

Changed scriptDir to D:\DFM_Database\script-plugins.

Changed reportsArchiveDir to D:\DFM_Database\reports.

Changed pluginsDir to D:\DFM_Database\plugins.

Changed dfmencKeysDir to D:\DFM_Database\conf\keys.

Changed databaseBackupDir to D:\DFM_Database\data.

Starting services...

Thanks

1 ACCEPTED SOLUTION

ORONA_MIKEL
5,630 Views

Hi Arun

We open one case with support. They discovered the recolertor is stoped because is not enable perfAdvisorEnabled parameter.

C:\Windows\system32>dfm diag

perfAdvisorEnabled       No

After send this options command for enable parameter, new data are monitoring in DFM. It is correct!!

C:\Windows\system32>dfm options set perfAdvisorEnabled=Enabled

Thanks!!

Mikel

View solution in original post

6 REPLIES 6

arunchak
5,630 Views

HI,

Irrespective of moving the database using "dfm datastore setup" command; you need to have sufficient free space in the root directory else the monitoring will stop. Please make more free space in the root directory such that the warning messages are no more thrown and try again.

Thanks,

  Arun

ORONA_MIKEL
5,630 Views

Hi

We have free space and error is active.

>dfm about

Version                          5.2.0.16233 (5.2)

Executable Type                  64-bit

Serial Number                    1-50-142016

Edition                          Standard edition of DataFabric Manager server

Data ONTAP Operating Mode        7-Mode

Administrator Name               xxx\dfernandezp

Host Name                        xxxxxxxx

Host IP Address                  10.200.100.204

Host Full Name                   xxxxx

Node limit                       250 (currently managing 😎

Operating System                 Microsoft Windows Server 2008 R2  (Build 7600) x64 based

CPU Count                        1

System Memory                    4095 MB (load: 60%)

Installation Directory           C:/Program Files/NetApp/DataFabric Manager/DFM                                  7.24 GB free (29.1%)

Perf Data Directory              D:\DFM_Database\perfdata

Data Export Directory            C:/Program Files/NetApp/DataFabric Manager/DFM/dataExport

Database Backup Directory        D:\DFM_Database\data

Reports Archival Directory       D:\DFM_Database\reports

Database Directory               D:/DFM_Database/data                                  25.3 GB free (63.2%)

Database Log Directory           D:/DFM_Database/data                                 25.3 GB free (63.2%)

Licensed Features                DataFabric Manager server: installed

Installed Plugins                Storage System Config 6.5.........

In dfm diag  (02 jul 10:12 is the time we  install  plug-in)

.....

Monitoring Timestamps

Timestamp Name       Status   Interval     Default      Last Updated     Status   Error if older than ...

ccTimestamp          Error    Off          4 hours      Not updated ( ccMonInterval is set to Off )

cfTimestamp          Error    Off          5 minutes   02 jul 10:12     Error    08 jul 08:36

clusterTimestamp     Error    Off          15 minutes   Not updated ( clusterMonInterval is set to Off )

cpuTimestamp         Error    1 hour       5 minutes    08 jul 08:16     Normal   08 jul 07:36

dfTimestamp          Normal   30 minutes   30 minutes   08 jul 08:11     Normal   08 jul 08:06

diskTimestamp        Error    1 day        4 hours      07 jul 10:08     Normal   07 jul 08:36

envTimestamp         Error    Off          5 minutes    02 jul 10:13     Error    08 jul 08:36

fsTimestamp          Normal   15 minutes   15 minutes   08 jul 08:28     Normal   08 jul 08:21

hostPingTimestamp    Normal   1 minute     1 minute     08 jul 08:36     Normal   08 jul 08:35

ifTimestamp          Error    1 day        15 minutes   07 jul 10:08     Normal   07 jul 08:36

licenseTimestamp     Normal   4 hours      4 hours      08 jul 06:15     Normal   08 jul 04:36

lunTimestamp         Error    Off          30 minutes   02 jul 10:07     Error    08 jul 08:36

opsTimestamp         Error    1 day        10 minutes   07 jul 10:07     Normal   07 jul 08:36

qtreeTimestamp       Normal   8 hours      8 hours                                08 jul 00:36

rbacTimestamp        Error    Off          1 day        02 jul 10:07     Error    08 jul 08:36

userQuotaTimestamp   Error    1 week       1 day        08 jul 08:28     Normal   01 jul 08:36

sanhostTimestamp     Error    Off          5 minutes    Not updated ( SANHostMonInterval is set to Off )

snapmirrorTimestamp  Error    2 hours      30 minutes   08 jul 08:32     Normal   08 jul 06:36

snapshotTimestamp    Error    1 hour       30 minutes   08 jul 08:35     Normal   08 jul 07:36

statusTimestamp      Normal   10 minutes   10 minutes   08 jul 08:35     Normal   08 jul 08:26

sysInfoTimestamp     Error    8 hours      1 hour       08 jul 02:11     Normal   08 jul 00:36

svTimestamp          Error    2 hours      30 minutes                             08 jul 06:36

svMonTimestamp       Error    Off          8 hours      Not updated ( backupDirMonInterval is set to Off )

xmlQtreeTimestamp    Normal   8 hours      8 hours      08 jul 08:35     Normal   08 jul 00:36

vFilerTimestamp      Normal   1 hour       1 hour       08 jul 07:40     Normal   08 jul 07:36

vserverTimestamp     Error    Off          1 hour       Not updated ( vserverMonInterval is set to Off )

....

Thanks

arunchak
5,630 Views

Can you perform a  "dfm host discover <host id>" again and see if the monitoring resumes normal?

Thanks,

  Arun

ORONA_MIKEL
5,631 Views

Hi

I  apply the command but not view changes.

C:\Windows\system32>dfm host discover IDAN01-CTRL2

Refreshing data from host IDAN01-CTRL2.orona.es (1335) now.

C:\Windows\system32>dfm host discover IDAN01-CTRL1

Refreshing data from host IDAN01-CTRL1.orona.es (1334) now. 

C:\Windows\system32>dfm host discover IDAN00-CTRL1

Refreshing data from host IDAN00-CTRL1.orona.es (1112) now.

C:\Windows\system32>dfm host discover IDAN00-CTRL2

Refreshing data from host IDAN00-CTRL2.orona.es (1114) now.

C:\Windows\system32>dfm host discover HEANL00-CTRl1

Refreshing data from host HEANL00-CTRL1.orona.es (280) now.

C:\Windows\system32>dfm host discover HEANL00-CTRl2

Refreshing data from host HEANL00-CTRL2.orona.es (281) now.

C:\Windows\system32>dfm host discover HEANL01-CTRl1

Refreshing data from host HEANL01-CTRL1.orona.es (130) now.

C:\Windows\system32>dfm host discover HEANL01-CTRl2

Refreshing data from host HEANL01-CTRL2.orona.es (131) now.

Thanks

arunchak
5,631 Views

HI,

May be you will have to go-ahead and open a support case for us to investigate further.

Thanks,

  Arun

ORONA_MIKEL
5,631 Views

Hi Arun

We open one case with support. They discovered the recolertor is stoped because is not enable perfAdvisorEnabled parameter.

C:\Windows\system32>dfm diag

perfAdvisorEnabled       No

After send this options command for enable parameter, new data are monitoring in DFM. It is correct!!

C:\Windows\system32>dfm options set perfAdvisorEnabled=Enabled

Thanks!!

Mikel

Public