Subscribe
Accepted Solution

How to replace FAS3270 Controller with FAS6240 Controller?

Dear Experts,

Can anybody help me about the procedure (step by step) how to replace FAS3270 Controller - HA Cluster with new one FAS6240 Controller (HA) ? and how about data? do this replacement cause the data on disk shelf (data aggr (aggr1)) overwritten?

Kindly need your suggestion , please?

Thank you

--feri-

Re: How to replace FAS3270 Controller with FAS6240 Controller?

The painpoints are:

  • Same Ontap-Release on source and destination
  • root volume size
  • check LUN Serials
  • check Nodenames
  • Disk reassignment
  • Mailbox destroy local / Mailbox destroy partner

No Data is overwritten!

The procedure is quite simular to the following article:

http://support.netapp.com/NOW/knowledge/docs/hardware/NetApp/cs_migration/FAS3xxx/FAS3040-FAS3070_to_FAS32xx_HA-pair/GUID-6C3427B1-F6EA-4143-9579-FEF8...

I have not found an "Upgrade Guide" from 32xx to 62xx but the workflow is very simular

Regards Bernd

Re: How to replace FAS3270 Controller with FAS6240 Controller?

Hi and welcome to the Community!

You can find this document useful ad well:

https://communities.netapp.com/docs/DOC-12356

Regards,
Radek

Re: How to replace FAS3270 Controller with FAS6240 Controller?

Thank you for your help, Bernd...It is really helpful....

Re: How to replace FAS3270 Controller with FAS6240 Controller?

Thank you for your help, Radek...It is really helpful....

Greatttt....Thank you very much....