2013-04-11 07:45 AM
Obviously, no matter what problem I create, I am the only person in the world to do it. There is no help anywhere. No where on the internet can I find an anwer to several questions, and they all involve NetApp and Symantec NetBackup.
I have loaded the OnCommand Unified Manager on my Master Server in the Symantec Netbackup Environement. My original goal is to make the NetBackup software recognize the NetApp Device. So I chose thisa installation for the DataFabric Manager, the provisioning, etc.
Now that I have the software loaded and installed to what I consider to be correctly, the GUI interface will not load. It turns blue, freezes and gives me not output. Can't seem to get an answer from NetApp or NetBackup.
At my wits end!
2013-04-11 09:26 AM
The ISG states that OnCommand Unified Manager Core should only be installed on a server by itself. In the next release the guide will clarify this guidance to state that it should be on its own server in any situation (not for a given node installation) or with the Unified Manager Host Package (used for backing up ESX virtual objects in 7-Mode environments).
For optimal performance, you should install the Core Package software on a dedicated system, especially if you are managing more than 30 storage systems with the DataFabric Manager server.
I am not sure what result you were attempting to get by installing DFM/UM on the NBU Master server. Can you clarify?
2013-04-11 11:35 AM
Thanks for the response. A little background. I have 22 Servers, a few workstations and a dozen virtual machines that I backup regularly with Symantec Netbackup. Because of the storage requirements, I have run out of storage space. I have a master server and two media servers. I have older HP servers that I make local backups to, and all of our dat is in a closed environment. When we first installed NetBackup, we had an ISCSI connection to A NetApp 2040, but that link was recently broken because of licensing issues as well as the addition of a brand new 2240.
When the Netapp 2240 was set up, it was configured for NFS. Neither NetApp or Symantec can tell me how to make the Symantec software recognize the 2240. The NBU Plugin does not work. So, in research, I decided to load the OCUM. Based on servers that I have available, I chose to load in the OnCommand on the Netbackup Master Server. None of the documentation I have read said that it needed to be stand-alone. I have made 3 dozen configuration changes to the server, read all the prerequisites, loaded host and oncommand files,
I have open tickets with NetApp and Symantec, but no one knows! I can not be the only person in the world who is trying to make this software recognize and write to a storage appliance, OTHER than a backup tape drive. I have dedicated space reserved for my backups on the NetApp device, but so far nothing I've done allows the software to see the hardware.
2013-04-11 12:10 PM
It sounds to me as if you are attempting to get NBU to manage the 2240 as a virtual tape library. This is not possible, at least with any software that NetApp provides.
You can read about the NBU Plugin software details in this guide, specifically pages 5-8: https://library.netapp.com/ecm/ecm_download_file/E
The NBU Plugin (installed on your DFM/UM server) will allow Symantec Replication Director to manage snapshot backups on the controller via DFM/Unified Manager.
2013-04-11 12:26 PM
Can you please tell us:
Did you see this error, "Error 1067" ?
Do you have the Java version updated?
Please go though below details and let me know if that is any help.
1. If you have a VMware environment and want to manage both physical and virtual objects, then you must install both the Core (install core package first) and Host Packages (install aftert the core package is installed).
2. Before installing OnCommand Core Package, you must preinstall Adobe Flash Player 8 or later on the server where the Core Package is to be installed, or your install job cannot succeed.
3. You might need to configure your firewall to open default ports that enable communication between DataFabric Manager server and various components, such as managed storage systems, agents, and so on. If a port is not open, communication fails between DataFabric Manager server and the storage system or other component.
4. Browser requirements and limitations
Not all versions of Firefox are supported. You should disable the automatic upgrade feature in Firefox to avoid installing an unsupported version.
Microsoft Internet Explorer, version 8
1. To avoid browser display issues, you must disable the Compatibility View feature before launching the OnCommand console. For details, see the Microsoft support site.
2. To ensure that OnCommand console can launch, you must ensure that active scripting and that binary and script behaviors are enabled.
3. If enhanced security is enabled in Internet Explorer 8, you might have to add http://DataFabric Manager server IP address:8080 to the browser's list of trusted sites so that you can access the server.
4. You might also have to add port 8443 to the list of trusted sites if you are using SSL.
5. You can add ports and URLs in the Security tab under Tools > Internet Options.
Microsoft Internet Explorer, version 9
If enhanced security is enabled, you must disable it. If enhanced security is enabled in Internet Explorer 9, the OnCommand console might not load.
2013-04-11 12:49 PM
No Java Error Messages- Went through the entire "Before you install" list.
Installed the host package and the server package separately on multiple occasions in different orders as some documentation said to load the host first.
Looked at all the pre-install instructions. Flash Player is well up to date (unless it only works with 8...I'm using 11.......)
Check all the ports and firewalls......open ports with AntiVirus on - also turned antivirus off as alot of documentation points to
Browser is IE9 Have Changed compatability settings - no luck! Enhanced Security is disabled!
I have the OCUM loaded on a Windows Server 2008R2, 64 bit system.
2013-04-11 12:58 PM
I'm not trying to get the NBU to manage the 2240, just to recognize the volume that was created for me to do backups. Its a shame to waste 48 TB of space.
The NBU Plugin, especially in the upcoming 7.6 version is specifically designed (supposedly) to recognize backup appliances and utilize NFS. All of the programs and protocols were established when NetBackup was a Unix based program. How do they lose their functionality?
I have read that manual from cover to cover 10 times, The NBU plugin has never executed properly so I thought the OnCommand Manager would allow me to utilize the plug in as well as the new NetApp System Manager that comes with the package.
Thanks so much for your insight so far, I have learned more from a few replies than either of my Global Managers can tell me.
2013-04-11 01:56 PM
I am not sure from where you got that instructions of installing host first, that is not correct.
If you are installing both Core and Host Packages, you should install Core Package software prior to installing Host Package software. If you install Host Package software first, you must start the Configuration wizard after you finish installing Core Package software unless you already have an earlier version of DataFabric Manager server in your environment.
Please find the attached doc for the ports that needs to be opened.
2013-04-12 06:14 AM
Ravi and/or Kevin,
So if I start over, my question is this. Can I pick any server to load the OnCommand Unified Manager on? Does it have to be affiliated with the NetBackup and/or Netapp equipment, or will any server in my Domain work?
2013-04-12 07:09 AM
May I ask you if you want to use NetApp storage as advanced disk storage, so NBU can dump the backup data to it?