Subscribe

OnCommand Authentication to FAS3210 Fails, though system is discoerable.

We have brought up a FAS3210. Initially, this was manageable via OnCommand. However, this is no longer the case. The system is discoverable via OnCommand. The system is also accessible via the SP and MGMT IP. I can log in to both the SP and MGMT with the configured username and password.

Any advice would be helpful.

Re: OnCommand Authentication to FAS3210 Fails, though system is discoerable.

I have the same problems with FAS3270 running 8.0.1.

I get Connection Timed out

Edit:

The I saw this post https://communities.netapp.com/message/65002#65002

Which says to re-setup ssl. Now things are working fine.

Try that and see if that fixes your issue too.

-Gopinath