Subscribe

OnCommand Insight 7.2: "Too complex to display" in "Topology" pane of some volume objects

Hi folks,

 

In the OnCommand Insight 7.2 web interface, I see the message "Too complex to display" in the "Topology" pane of some volume objects. I don't remember seeing this in previous versions of Insight.  Would anyone happen to know of a workaround that permits topology diagrams to be displayed in situations which Insight evaluates as "too complex"?

 

This is a pretty big problem for my colleagues and I.  The topology diagrams help us to meet a regulatory requirement that would otherwise be overwhelmingly labor-intensive.  Losing the topology diagram capability would destroy a lot of Insight's value to us.


Thanks,

Jim Blackburn

 

Re: OnCommand Insight 7.2: "Too complex to display" in "Topology" pane of some v

Hey Jim,

 

This is the first I have heard of this - apparently this change was made because of slow page load times in certain situations.

 

I'd like to chat with you via email - ping me at ostiguy at netapp dot com. I am curious to know what types of configurations this occurs in, and if you are sending OCI ASUP

 

Thanks

 

Matt

Re: OnCommand Insight 7.2: "Too complex to display" in "Topology" pane of some v

Hi Matt

 

I see the same in 7.2.1 " Too complex to Display" the Topology

 

 

Re: OnCommand Insight 7.2: "Too complex to display" in "Topology" pane of some v

Hi,

 

we have this by Brocade and Cisco Switches, in OCI 7.1 the topology view is correct, in 7.2.1 "too complex to display"

 

thanks

Michael

Re: OnCommand Insight 7.2: "Too complex to display" in "Topology" pane of some v

[ Edited ]

ostiguy wrote:

Hey Jim,

 

This is the first I have heard of this - apparently this change was made because of slow page load times in certain situations.

 

I'd like to chat with you via email - ping me at ostiguy at netapp dot com. I am curious to know what types of configurations this occurs in, and if you are sending OCI ASUP

 

Thanks

 

Matt


 

That's unfortunate.  We need the topology diagram capability in all situations, regardless of how long it might take for the diagram to be generated and/or loaded.  Affected configuration is a volume provisioned from a storage virtualization device.  Autosupport is not enabled on the Insight installation, and I don't think it's likely that the feature would ever be authorized.

 

Thank you,

Jim Blackburn

Re: OnCommand Insight 7.2: "Too complex to display" in "Topology" pane of some v

[ Edited ]

hi Jim

 

I have contacted Matt via e-mail, we will send a ASUP from our OCI 7.2.1 to Netapp

 

br Michael