Subscribe

Ops Manager Communication Ports

Can someone tell me what ports are used by Operations Manager and a NetApp controller for monitoring?

Re: Ops Manager Communication Ports

Hi Chris,

If you are looking for just discovery/monitoring, here you go :

http- 80 - Storage System management

https- 443 - Storage system management secured communication

snmp - 161 - Discovery/Monitoring of appliances

If you are looking for all the ports involved b/w DFM and appliances,

refer the below FAQ :

https://library.netapp.com/ecmdocs/ECMM1278650/html/faq/index.shtml#_3.14

Regards,

Saravanan M

Re: Ops Manager Communication Ports

Hey Msaravan,

I am using DFM version 4.0.0.6953 (4.0) with OnTap version 8.0.2 P3. Could you please confirm these ports requirements for this version.

Also this deployment requires a unidirectional (Filer -> Ops Mgr.) communication or bidirectional?

Thanks,

SM

Re: Ops Manager Communication Ports

Hi SM,

     Firstly I recommend you to upgrade to 5.0.2 which is the current GA candidate. Also I am not sure if 8.0.2 is support with 4.0.  The following FAQ gives the direction and port used for communication between dfm and its managed systems.

https://library.netapp.com/ecmdocs/ECMM1278650/html/faq/index.shtml#_3.14

Regards

adai

Re: Ops Manager Communication Ports

We are running 4.0 Ops Mgr. with 8.0.2 P3. So no issues there. Might go for upgrade in the last quarter though.

Thanks for the FAQ. Will go through it.

Regards,

SM

Re: Ops Manager Communication Ports

The FAQ had sufficient information for Ops Manager configuration. We are up and running now.

Thanks Adai.

Re: Ops Manager Communication Ports

Hi

    Happpy to help you. Good to know that FAQ's solved your issue and gave details.

Regards

adai