Subscribe

Performance issue on iscsi disk assigned as quorum disk for a print cluster of 2-nodes

[ Edited ]

VERSION=NetApp Release 8.2.4P6 7-Mode

FAS3240

 

I have an iscsi disks assigned to 2 hosts which is used as a quorum disk.

The cluster went down , but it was brought online through the console, what all needs to be checked from storage end , to understand the root cause of the issue.

 

i could see there were high ops/throughput during when the issue reported.

Kindly help 

Re: Performance issue on iscsi disk assigned as quorum disk for a print cluster of 2-nodes

To understand the root cause of the issue, I'll recommend you open a case with netapp support and provide the nessary data.

and they should be able to help you identiy the reason for failure of both controller (HA Pair)

 

Mean while you can make sure few things using the following commands.

 

::> set adv
::*> node show
::*> cluster show
::*> cluster ha show
::*> cluster ring show
::*> cluster kernel-service show 
::*> cluster ping-cluster -node node-01
::*> cluster ping-cluster -node node-02

::*> system health status show
::*> system health alert show
::*> system health subsystem show
::*> system health config show 
::*> system environment sensors show
::*> system node power show

::*> storage failover show
::*> storage failover hwassist show
::*> storage failover interconnect show

::*> event log show -time >= 1h 

Still I highly recommed you to open a case with netapp support to get the bottom of it.