Active IQ Unified Manager Discussions
Active IQ Unified Manager Discussions
I receive mail from dfm .it said my nas node is clock skewd .But I setup timed enable . how can I set nas time to correct time .
Thanks .
My nas version is 8.2 ,
Blow is the mail
An Error event at 23 Feb 05:19 Malay Peninsula Standard Time on Active/Active Controller abcnas1b.ppd.def.com:
Clock Skewed.
Clock on host abcnas1b.ppd.def.com (4223) is behind management station by 60 seconds
Below is the timed options , ntp server is alive .
timed.enable on (same value in local+partner recommended)
timed.log off (same value in local+partner recommended)
timed.max_skew 30m (same value in local+partner recommended)
timed.min_skew 0 (same value in local+partner recommended)
timed.proto ntp (same value in local+partner recommended)
timed.sched hourly (same value in local+partner recommended)
timed.servers ntp31.def.com,ntp32.def.com (same value in local+partner recommended)
timed.window 0s (same value in local+partner recommended)
Hi,
This typically occurs when the time between the DFM server and the controller is greater than 60 seconds. There are a few ways to address it.
Hello Renifa
Thanks for your repy,I checked time server , it is the same one on controllers and DFM server .
The controller time is behind DFM server time .It is alose behind the other one controller .
The threshold setting is 30 second on DFM server .
hostClockNearlySkewedThreshold 30 seconds
Yes, that is correct. refer
1011954 How to set up NTP time synchronization in Data ONTAP 7-Mode