Subscribe
Accepted Solution

netapp-harvest capacity metrics for cDOT 8.3.2

we added new cdot 8.3.2 to our new site 

defined host and its collecting perf data 

 

But we are not seeing capacity data 

new cdot is added to ocum which is already defined in netapp-harvest.conf

 

do we need updated template for 8.3.2 or 8.3.0 is ok as below ?

"[cdot-8.3.0.conf]"

 

 

 

 

poller startup log 

[2016-05-18 09:31:25] [NORMAL ] WORKER STARTED [Version: 1.2.2] [Conf: netapp-harvest.conf] [Poller: CDOT-MD]
[2016-05-18 09:31:25] [NORMAL ] [main] Poller will monitor a [FILER] at [10.140.11.35:443]
[2016-05-18 09:31:25] [NORMAL ] [main] Poller will use [password] authentication with username [netappharvest] and password [**********]
[2016-05-18 09:31:25] [WARNING] [connect] Setting HTTP/1.0 because reverse hostname resolution (IP -> hostname) fails. To enable HTTP/1.1 ensure reverse hostname resolution succeeds.
[2016-05-18 09:31:25] [WARNING] [connect] Setting HTTP/1.0 because reverse hostname resolution (IP -> hostname) fails. To enable HTTP/1.1 ensure reverse hostname resolution succeeds.
[2016-05-18 09:31:25] [NORMAL ] [main] Collection of system info from [10.140.11.35] running [NetApp Release 8.3.2] successful.
[2016-05-18 09:31:25] [NORMAL ] [main] Using best-fit collection template: [cdot-8.3.0.conf]
[2016-05-18 09:31:26] [NORMAL ] [main] Using graphite_root [netapp.perf.MD.CDOT-MD]
[2016-05-18 09:31:26] [NORMAL ] [main] Using graphite_meta_metrics_root [netapp.poller.perf.MD.CDOT-MD]
[2016-05-18 09:31:26] [NORMAL ] [smb2:node] Collection of object not enabled; skipping
[2016-05-18 09:31:26] [NORMAL ] [smb2:vserver] Collection of object not enabled; skipping
[2016-05-18 09:31:26] [NORMAL ] [main] Startup complete. Polling for new data every [30] seconds.

Re: netapp-harvest capacity metrics for cDOT 8.3.2

nevermind ,it looks like working now