Active IQ Unified Manager Discussions

"perf:system:load_total_mbps:breached" Can some one please help me to address this alert.

Naveenkumarp22
2,684 Views

Hi All,

 

Last night i got an alert from operations manager. Please find the alert below.

 

Event Description: A 'perf:system:load_total_mbps:breached' event has been detected

 

Can anyone please help me to address this.

1 ACCEPTED SOLUTION

Renifa
2,616 Views

Hi,

This is not exactly a problem.Its just an alert stating that the threshold was cross. The threshold can be changed if this happens frequently.

If you need to change the threshold settings follow the netapp Kb "https://kb.netapp.com/support/index?page=content&id=3010964"

Also check the OnCommand Unified Manager Performance Advisor Administration Guide "https://library.netapp.com/ecm/ecm_download_file/ECMP1217275" page no 85, to know how the load_total_mbps parameter is calculated.

 

Hope this helps.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

2 REPLIES 2

Renifa
2,617 Views

Hi,

This is not exactly a problem.Its just an alert stating that the threshold was cross. The threshold can be changed if this happens frequently.

If you need to change the threshold settings follow the netapp Kb "https://kb.netapp.com/support/index?page=content&id=3010964"

Also check the OnCommand Unified Manager Performance Advisor Administration Guide "https://library.netapp.com/ecm/ecm_download_file/ECMP1217275" page no 85, to know how the load_total_mbps parameter is calculated.

 

Hope this helps.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

Naveenkumarp22
2,516 Views

Thank you so much 🙂

Spoiler
Spoiler
Spoiler
🙂

 

Public