Community

Subscribe
Highlighted

Protection Manager shows failed SnapMirror update and filer shows the mirror completed successfully

All,

I have a customer that is using SC 3.6 to create local snapshots and then register the snapshots with PM to perform SnapMirrors and SnapVaults. The Vault is working fine as the secondary is located in the same building. However, as for SnapMirror, Protection Manager is reporting that the SnapMirror Updates are failing (intermittently) and at the same time, from a filer perspective, the updates are completing successfully. It seems as if PM is not receiving API acknowledgement from the DR filer. What could be the reason for this?

Here is what the logs are showing:

SNAPCREATOR LOG

[Fri Jul 19 09:20:00 2013] INFO: Logfile timestamp: 20130719092000

[Fri Jul 19 09:20:00 2013] INFO: Removing log dfsupmvintp01_snap.out.20130718062000.log

[Fri Jul 19 09:20:00 2013] INFO: Removing log dfsupmvintp01_snap.debug.20130718062000.log

[Fri Jul 19 09:20:00 2013] INFO: Removing log dfsupmvintp01_snap.stderr.20130718062000.log

########## Parsing Environment Parameters ##########

########## PRE APPLICATION QUIESCE COMMANDS ##########

[Fri Jul 19 09:20:00 2013] INFO: No commands defined

########## PRE APPLICATION QUIESCE COMMANDS FINISHED SUCCESSFULLY ##########

########## APPLICATION QUIESCE COMMANDS ##########

[Fri Jul 19 09:20:00 2013] INFO: No commands defined

########## APPLICATION QUIESCE COMMANDS FINISHED SUCCESSFULLY ##########

########## POST APPLICATION QUIESCE COMMANDS ##########

[Fri Jul 19 09:20:00 2013] INFO: No commands defined

########## POST APPLICATION QUIESCE COMMANDS FINISHED SUCCESSFULLY ##########

########## PRE COMMANDS ##########

[Fri Jul 19 09:20:00 2013] INFO: No commands defined

########## PRE COMMANDS FINISHED SUCCESSFULLY ##########

########## Parsing Environment Parameters ##########

[Fri Jul 19 09:20:00 2013] WARN: Snapshot's will not be deleted, if this is not desired please set NTAP_SNAPSHOT_NODELETE=N in config file

########## Detecting Data OnTap mode for netapp2 ##########

[Fri Jul 19 09:20:03 2013] INFO: Data OnTap 7 mode detected

########## Generating Info ASUP on netapp2 ##########

[Fri Jul 19 09:20:03 2013] INFO: ASUP create on netapp2 finished successfully

########## Gathering Information for netapp2:FileServer_vol11 ##########

[Fri Jul 19 09:20:03 2013] INFO: Performing Snapshot Inventory for FileServer_vol11 on netapp2

[Fri Jul 19 09:20:03 2013] INFO: Snapshot Inventory of FileServer_vol11 on netapp2 completed Successfully

########## Running Snapshot Rename on Primary netapp2 ##########

########## Creating snapshot(s) ##########

########## SNAPSHOT CREATE COMMANDS ##########

[Fri Jul 19 09:20:03 2013] INFO: Running snapshot create command NTAP_SNAPSHOT_CREATE_CMD01 ["c:/Program Files/NetApp/SnapDrive/sdcli" snap create -s dfsupmvintp01-hourly_20130719092000 -D U]

[Fri Jul 19 09:21:04 2013] INFO: Running snapshot create command ["c:/Program Files/NetApp/SnapDrive/sdcli" snap create -s dfsupmvintp01-hourly_20130719092000 -D U] finished successfully

########## SNAPSHOT CREATE COMMANDS FINISHED SUCCESSFULLY ##########

########## PRE APPLICATION UNQUIESCE COMMANDS ##########

[Fri Jul 19 09:21:04 2013] INFO: No commands defined

########## PRE APPLICATION UNQUIESCE COMMANDS FINISHED SUCCESSFULLY ##########

########## APPLICATION UNQUIESCE COMMANDS ##########

[Fri Jul 19 09:21:04 2013] INFO: No commands defined

########## APPLICATION UNQUIESCE COMMANDS FINISHED SUCCESSFULLY ##########

########## POST APPLICATION UNQUIESCE COMMANDS ##########

[Fri Jul 19 09:21:04 2013] INFO: No commands defined

########## POST APPLICATION UNQUIESCE COMMANDS FINISHED SUCCESSFULLY ##########

########## Generating Info ASUP on netapp2 ##########

[Fri Jul 19 09:21:04 2013] INFO: ASUP create on netapp2 finished successfully

########## Checking Protection Manager dataset snapcreator_dfsupmvintp01_snap ##########

[Fri Jul 19 09:21:04 2013] INFO: Checking if Protection Manager dataset snapcreator_dfsupmvintp01_snap is conformant

[Fri Jul 19 09:21:04 2013] INFO: Protection Manager dataset snapcreator_dfsupmvintp01_snap is conformant

[Fri Jul 19 09:21:04 2013] WARN: Protection Manager dataset snapcreator_dfsupmvintp01_snap resource status error

[Fri Jul 19 09:21:04 2013] INFO: Performing Protection Manager dataset verify for snapcreator_dfsupmvintp01_snap

[Fri Jul 19 09:21:04 2013] INFO: Protection Manager dataset changes not detected

[Fri Jul 19 09:21:04 2013] INFO: Protection Manager dataset verify for snapcreator_dfsupmvintp01_snap completed successfully

########## Gathering Information for netapp2:FileServer_vol11 ##########

[Fri Jul 19 09:21:04 2013] INFO: Performing Snapshot Inventory for FileServer_vol11 on netapp2

[Fri Jul 19 09:21:05 2013] INFO: Snapshot Inventory of FileServer_vol11 on netapp2 completed Successfully

########## Creating Protection Manager Backup Version for volume FileServer_vol11 dataset snapcreator_dfsupmvintp01_snap ##########

[Fri Jul 19 09:21:05 2013] INFO: Finding all members associated with Protection Manager dataset snapcreator_dfsupmvintp01_snap

[Fri Jul 19 09:21:05 2013] INFO: All members of Protection Manager dataset snapcreator_dfsupmvintp01_snap Successfully discovered

[Fri Jul 19 09:21:05 2013] INFO: Added member netapp2:/FileServer_vol11/- from dataset snapcreator_dfsupmvintp01_snap to Protection Manager Backup Version

########## Running Protection Manager Backup Version Create for dataset snapcreator_dfsupmvintp01_snap ##########

[Fri Jul 19 09:21:05 2013] INFO: Registering snapshot dfsupmvintp01-hourly_20130719092000 with Protection Manager dataset snapcreator_dfsupmvintp01_snap

[Fri Jul 19 09:21:05 2013] INFO: Snapshot(s) for dataset snapcreator_dfsupmvintp01_snap registered with Protection Manager successfully

########## Running Protection Manager backup start for dataset snapcreator_dfsupmvintp01_snap ##########

[Fri Jul 19 09:21:05 2013] INFO: Starting Protection Manager backup

[Fri Jul 19 09:21:05 2013] INFO: Protection Manager backup start completed successfully

########## Getting Protection Manager backup progress ##########

[Fri Jul 19 09:21:15 2013] INFO: Getting Protection Manager backup progress for job-id 177115

[Fri Jul 19 09:21:16 2013] INFO: Protection Manager backup progress get for job-id 177115 completed successfully

[Fri Jul 19 09:21:16 2013] INFO: Protection Manager backup for job-id 177115 is running, Sleeping 1 minute

[Fri Jul 19 09:22:16 2013] INFO: Getting Protection Manager backup progress for job-id 177115

[Fri Jul 19 09:22:17 2013] INFO: Protection Manager backup progress get for job-id 177115 completed successfully

[Fri Jul 19 09:22:17 2013] INFO: Protection Manager backup for job-id 177115 is running, Sleeping 1 minute

[Fri Jul 19 09:23:17 2013] INFO: Getting Protection Manager backup progress for job-id 177115

[Fri Jul 19 09:23:18 2013] INFO: Protection Manager backup progress get for job-id 177115 completed successfully

[Fri Jul 19 09:23:18 2013] INFO: Protection Manager backup for job-id 177115 is running, Sleeping 1 minute

[Fri Jul 19 09:24:18 2013] INFO: Getting Protection Manager backup progress for job-id 177115

[Fri Jul 19 09:24:20 2013] INFO: Protection Manager backup progress get for job-id 177115 completed successfully

[Fri Jul 19 09:24:20 2013] ERROR: [scf-00099] Protection Manager backup for job-id 177115 completed with errors - 2642852|error|snapmirror-end|SnapMirror transfer failed.

########## PRE EXIT COMMANDS ##########

[Fri Jul 19 09:24:20 2013] INFO: No commands defined

########## PRE EXIT COMMANDS FINISHED SUCCESSFULLY ##########

[Fri Jul 19 09:24:20 2013] INFO: Creating OM Event (script:critical-event) on sys56

[Fri Jul 19 09:24:20 2013] INFO: OM Event (script:critical-event) on sys56 created successfully

DFM LOG

A Critical event at 19 Jul 09:20 EDT on Mgmt Station sys56:

Script: Critical Event.

SNAPCREATOR [scf-00099] Protection Manager backup for job-id 177115 completed with errors - 2642852|error|snapmirror-end|SnapMirror transfer failed. (Config: dfsupmvintp01_snap Name: dfsupmvintp01 Policy: hourly)

Click below to see the details of this event.

http://sys56:8080/start.html#st=1&data=(eventID=704318)

*** Event details follow.***

General Information

-------------------

DataFabric Manager server Serial Number: 1-50-130179 Alarm Identifier: 4

Event Fields

-------------

Event Identifier: 704318

Event Name: Script: Critical Event

Event Description: Script Generated event Event Severity: Critical Event Timestamp: 19 Jul 09:20

Source of Event

---------------

Source Identifier: 1

Source Name: sys56

Source Type: Mgmt Station

Source Status: Critical

Event Arguments

---------------

script-condition: SNAPCREATOR [scf-00099] Protection Manager backup for job-id 177115 completed with errors - 2642852|error|snapmirror-end|SnapMirror transfer failed. (Config: dfsupmvintp01_snap Name: dfsupmvintp01 Policy: hourly)

--NetApp DataFabric Manager

Re: Protection Manager shows failed SnapMirror update and filer shows the mirror completed successfully

Hello Rodrigue,

Please provide me with the below details.

You may email me to sivar @ netapp.com

Please login to your DFM server (Is it windows?) and get me the below output.

dfm host get netapp2

dfm host get <fillinyourdrfilername>

dfm host diag netapp2

dfm host diag <fillinyourdrfilername>

and

dfm option list

Re: Protection Manager shows failed SnapMirror update and filer shows the mirror completed successfully

Ok. One sec -- working on it.

Re: Protection Manager shows failed SnapMirror update and filer shows the mirror completed successfully

I cannot figure out how to attach but in any case, here it is. I have included the dfm get for all the filers.

Script started on Fri 19 Jul 2013 10:09:49 AM EDT

[root@sys56 ~]# dfm host n   get netapp1

Host:                                        netapp1.fldoi.gov

Login:                                       root

Password:                                    ********

Login Protocol:                              ssh

Preferred IP address 1:                    

Preferred IP address 2:                    

Primary IP Address:                          172.17.80.22

Remote Platform Management IP Address:     

Console Terminal Server Address:           

Host CPU Too Busy Threshold (%):             95

Host CPU Busy Threshold Interval:            00:15:00

Ping Method:                                 echo_snmp

Administration Transport:                    https

NDMP Login:                                  ndmpuser

NDMP Password:                               ********

Administration Port:                         443

Performance Advisor Transport:               httpsOk

Preferred SNMP Version:                      1

Hosts.equiv Enabled:                         No

Maximum Active Data Transfers:             

Performance Advisor Data Export Enabled:     No

Host vFiler Default Interface:             

Primary IP Address Inconsistency Action:   

Automatically collect per-client statistics: No

Host clock skew threshold:                   1 minute

Host clock nearly skewed threshold:          30 seconds

[root@sys56 ~]# dfm host get netapp1   2

Host:                                        netapp2.fldoi.gov

Login:                                       root

Password:                                    ********

Login Protocol:                              ssh

Preferred IP address 1:                    

Preferred IP address 2:                    

Primary IP Address:                          172.17.80.24

Remote Platform Management IP Address:     

Console Terminal Server Address:           

Host CPU Too Busy Threshold (%):             95

Host CPU Busy Threshold Interval:            00:15:00

Ping Method:                                 echo_snmp

Administration Transport:                    https

NDMP Login:                                  ndmpuser

NDMP Password:                               ********

Administration Port:                         443

Performance Advisor Transport:               httpsOk

Preferred SNMP Version:                      1

Hosts.equiv Enabled:                         No

Maximum Active Data Transfers:             

Performance Advisor Data Export Enabled:     No

Host vFiler Default Interface:             

Primary IP Address Inconsistency Action:   

Automatically collect per-client statistics: No

Host clock skew threshold:                   1 minute

Host clock nearly skewed threshold:          30 seconds

[root@sys56 ~]# dfm host get netapp2   3

Host:                                        netapp3.fldoi.gov

Login:                                       administrator

Password:                                    ********

Login Protocol:                              ssh

Preferred IP address 1:                    

Preferred IP address 2:                    

Primary IP Address:                          158.229.72.10

Remote Platform Management IP Address:     

Console Terminal Server Address:           

Host CPU Too Busy Threshold (%):             95

Host CPU Busy Threshold Interval:            00:15:00

Ping Method:                                 echo_snmp

Administration Transport:                    https

NDMP Login:                                  ndmpuser

NDMP Password:                               ********

Administration Port:                         443

Performance Advisor Transport:               httpsOk

Preferred SNMP Version:                      1

Hosts.equiv Enabled:                         No

Maximum Active Data Transfers:             

Performance Advisor Data Export Enabled:     No

Host vFiler Default Interface:             

Primary IP Address Inconsistency Action:   

Automatically collect per-client statistics: No

Host clock skew threshold:                   1 minute

Host clock nearly skewed threshold:          30 seconds

[root@sys56 ~]# dfm host get netapp3   4

Host:                                        netapp4.fldoi.gov

Login:                                       administrator

Password:                                    ********

Login Protocol:                              ssh

Preferred IP address 1:                    

Preferred IP address 2:                    

Primary IP Address:                          158.229.72.11

Remote Platform Management IP Address:     

Console Terminal Server Address:           

Host CPU Too Busy Threshold (%):             95

Host CPU Busy Threshold Interval:            00:15:00

Ping Method:                                 echo_snmp

Administration Transport:                    https

NDMP Login:                                  ndmpuser

NDMP Password:                               ********

Administration Port:                         443

Performance Advisor Transport:               httpsOk

Preferred SNMP Version:                      1

Hosts.equiv Enabled:                         No

Maximum Active Data Transfers:             

Performance Advisor Data Export Enabled:     No

Host vFiler Default Interface:             

Primary IP Address Inconsistency Action:   

Automatically collect per-client statistics: No

Host clock skew threshold:                   1 minute

Host clock nearly skewed threshold:          30 seconds

[root@sys56 ~]# dfm host get netapp4                     backuop1         p1

Host:                                        backup1.fldoi.gov

Login:                                       root

Password:                                    ********

Login Protocol:                              ssh

Preferred IP address 1:                    

Preferred IP address 2:                    

Primary IP Address:                          172.17.80.32

Remote Platform Management IP Address:     

Console Terminal Server Address:           

Host CPU Too Busy Threshold (%):             95

Host CPU Busy Threshold Interval:            00:15:00

Ping Method:                                 echo_snmp

Administration Transport:                    https

NDMP Login:                                  ndmpuser

NDMP Password:                               ********

Administration Port:                         443

Performance Advisor Transport:               httpsOk

Preferred SNMP Version:                      1

Hosts.equiv Enabled:                         No

Maximum Active Data Transfers:             

Performance Advisor Data Export Enabled:     No

Host vFiler Default Interface:             

Primary IP Address Inconsistency Action:   

Automatically collect per-client statistics: No

Host clock skew threshold:                   1 minute

Host clock nearly skewed threshold:          30 seconds

[root@sys56 ~]# dfm options list

Option                                Value                       

------------------------------------- ------------------------------

agentHostAdminPassword                ********

agentHostCIFSAccount                

agentHostCIFSPassword                 ********

agentHostGuestPassword                ********

agentHostLogin                        guest

agentHostPort                         4092

agentHostTransport                    http

agentMonInterval                      2 minutes

aggrFullThreshold                     90

aggrFullThresholdInterval             0 seconds

aggrNearlyFullThreshold               80

aggrNearlyOvercommittedThreshold      95

aggrNearlyOverDeduplicatedThreshold   150

aggrOvercommittedThreshold            100

aggrOverDeduplicatedThreshold         160

aggrSnapshotFullThreshold             90

aggrSnapshotNearlyFullThreshold       80

alarmScriptRunAs                    

alertFrom                             OnCommandCore@noreply-ever.com

auditLogEnabled                       Enabled

auditLogForever                       No

authUsePam                            no

autoClientStatEnabled                 No

autosupportAdminContact             

autosupportContent                    complete

autosupportDestinationEmail           autosupport@netapp.com

autosupportDestinationURL             support.netapp.com/asupprod/post/1.0/postAsup

autosupportEnabled                    Yes

autosupportIncludeAllDiagInfo         No

autosupportIncludePerf                Yes

autosupportIncludeProv                Yes

autosupportIncludeVirtual             Yes

autosupportMonInterval                2 minutes

autosupportProtocol                   https

autosupportRetryCount                 4

autosupportRetryDelay                 15 minutes

backupDirMonInterval                  8 hours

backupRetentionCount                  4

ccMonInterval                         4 hours

cfMonInterval                         5 minutes

chargebackDayOfMonth                  1

chargebackIncrement                   Daily

chargebackRate                      

clientStatCifsLatency                 30

clientStatCpuThreshold                80

clientStatMinTotalOpsRate             500

clientStatNfsLatency                  30

clientStatThresholdPeriod             300

clientStatTotalOpsRate                30

clusterMonInterval                    Off

cpuBusyThresholdInterval              15 minutes

cpuMonInterval                        5 minutes

cpuTooBusyThreshold                   95

credCacheTTL                          20 minutes

currencyFormat                        $ #,###.##

currentEventsCacheSize              

databaseBackupDbengWaitTime           600

databaseBackupDir                     /opt/NTAPdfm/data/

dataExportDir                         /opt/NTAPdfm/dataExport/

dataTransferReports                   Enabled

defReportLinesPerPage                 20

deletePrimaryOSSVDirectory            No

dfmDataExportEnabled                  No

dfmencKeysDir                         /opt/NTAPdfm/conf/keys

dfMonInterval                         30 minutes

discoverAgents                        Enabled

discoverClusters                      Disabled

discoverEnabled                       Enabled

discoverHostInitEnabled               Enabled

discoverHosts                         Enabled

discoverInterval                      15 minutes

discoverNetworks                      Disabled

discoverTimeout                       5 seconds

discoverVfilers                       Enabled

diskMonInterval                       4 hours

dpDynamicSecondarySizing              Enabled

dpMaxFanInRatio                       1

dpPriVolNameFormat                    %L

dpPriVolNameOption                    global-format

dpPriVolNameScriptPath              

dpPriVolNameScriptRunAs             

dpReaperCleanupMode                   Orphans

dpReaperInterval                      30 minutes

dpReBaselineMode                      Confirm

dpRestoreTransfersPerHost             8

dpSecQtreeNameFormat                  %Q

dpSecVolNameFormat                    %V

dpSecVolNameOption                    global-format

dpSecVolNameScriptPath              

dpSecVolNameScriptRunAs             

dpSnapNameFormat                      %T_%R_%L_%H_%N_%A

dpSnapNameOption                      global-format

dpSnapNameScriptPath                

dpSnapNameScriptRunAs               

dsConformanceMonInterval              1 hour

dsDRMonInterval                       15 minutes

dsProtectionMonInterval               15 minutes

dsUsageMetricCommentFields          

dsUsageMetricIoInterval               1 day

dsUsageMetricMonInterval              2 hours

dsUsageMetricSpaceInterval            1 day

enableFQDNInFilerViewLinks            Enabled

envMonInterval                        5 minutes

eventsPurgeInterval                   25.71 weeks

favoriteMaxReports                    25

filerConfigSaveLocalChanges           yes

fsMonInterval                         15 minutes

groupTreeShowStatus                   Enabled

growthRateSensitivity                 2

guiRefreshInterval                    00:05:00

hbaportTooBusyThreshold               90

hostAdminPort                         80

hostAdminTransport                    http

hostClockNearlySkewedThreshold        30 seconds

hostClockSkewedThreshold              1 minute

hostEnclosureDiscoveryEvents          Disabled

hostLoginProtocol                     rsh

hostPingMethod                        echo_snmp

hostRBACMonInterval                   1 day

hsNotificationsMaxCount               100000

hsNotificationsPurgingInterval        86400

httpEnabled                           Yes

httpPort                              8080

httpsEnabled                          Yes

httpsPort                             8443

ifMonInterval                         15 minutes

isHsAliveMonInterval                  1 minute

keystorePassphraseFile              

ldapBaseDN                          

ldapBindDN                          

ldapBindPass                          ********

ldapEnabled                           No

ldapGID                             

ldapMember                            uniqueMember

ldapUGID                              CN

ldapUID                               UID

ldapVersion                           3

licenseExpireWarningThreshold         5

licenseMonInterval                    4 hours

localHostName                       

lunMonInterval                        30 minutes

maxReportLinesPerPage                 1000

monMinFreeBytes                       10000.0

monMinFreePercent                     10.0

monSNMPRetries                        4

monSNMPTimeout                        60

ndmpDataUseAllInterfaces              0

ndmpMonInterval                       30 minutes

networkDiscoveryLimit                 15

nodesRemainingWarningThreshold        1

opsMonInterval                        10 minutes

ownerEmailFieldName                   ownerEmail

perfAdvisorEnabled                    Enabled

perfAdvisorMaxMonitorThreads          32

perfAdvisorPollInterval               5 minutes

perfAdvisorShowAllViews               Disabled

perfAdvisorShowDiagCounters           Disabled

perfAdvisorTransport                  httpOnly

perfAdvThreshViolationMonInterval     15 minutes

perfArchiveDir                        /opt/NTAPdfm/perfdata

perfDataExportEnabled                 No

perfExportDir                         /opt/NTAPdfm/perfExport

perfMaxObjectInstancesInBarChart      20

perfSampleRate1                       1 minute

perfSampleRate2                       5 minutes

perfSampleRate3                       15 minutes

perfSampleRate4                       30 minutes

pingMonInterval                       1 minute

pingMonRetryDelay                     3

pingMonTimeout                        3

pluginsDir                            /opt/NTAPdfm/plugins

pmQSMBackupPreferred                  No

pmUseSDUCompatibleSnapshotNames       No

preferredIPAddressType                IPv4

processHostPrimaryAddress             off

processOSSVPrimaryAddress             warn

profileTTL                            6.43 weeks

protMgrNodesRemainingWarningThreshold 1

provMgrNodesRemainingWarningThreshold 1

qtreeFullThreshold                    90

qtreeFullThresholdInterval            0 seconds

qtreeGrowthEventMinChangePct          1

qtreeMonInterval                      8 hours

qtreeNearlyFullThreshold              80

recentMaxReports                      25

reportDesignPath                      /opt/NTAPdfm/reports/

reportsArchiveDir                     /opt/NTAPdfm/reports/

respoolFullThreshold                  90

respoolNearlyFullThreshold            80

respoolSpaceMonInterval               1 hour

rshBinary                           

SANHostMonInterval                    5 minutes

SANHostMonSnapshotLUNs                Enabled

scriptDir                             /opt/NTAPdfm/script-plugins

scriptPath                          

serverAPILogExclude                   host-service-discover|dfm-about

serverCertAuthEnabled                 Enabled

serverHTTPEnabled                     Disabled

serverHTTPPort                        8088

serverHTTPSEnabled                    Enabled

serverHTTPSPort                       8488

shareMonInterval                      1 hour

SMTPServerBackup                    

SMTPServerName                        localhost

SMTPServerPort                        25

snapmirrorLagErrorThreshold           2 days,  0:00

snapmirrorLagWarningThreshold         1 day, 12:00

snapmirrorMonInterval                 30 minutes

snapshotDiscoveryEventsEnabled        No

snapshotMonInterval                   30 minutes

snapvaultMonInterval                  30 minutes

snmpTrapListenerEnabled               Yes

snmpTrapListenerPort                  162

snmpTrapRcvdMaxPerWindow              250

snmpTrapRcvdWindowSize                5 minutes

statusMonInterval                     10 minutes

sysInfoMonInterval                    1 hour

useHostsEquiv                         No

userEmailDefaultDomain              

userEnableAlerts                      yes

userFullThreshold                     90

userNearlyFullThreshold               80

userQuotaMonInterval                  1 day

vFilerMonInterval                     1 hour

vFilerRootVolumeSizeMb                50

volFullThreshold                      90

volFullThresholdInterval              0 seconds

volGrowthEventMinChangePct            1

volNearlyFullThreshold                80

volNearlyNoFirstSnapThreshold         80

volNearlyOvercommittedThreshold       95

volNearlyOverDeduplicatedThreshold    140

volNoFirstSnapThreshold               90

volOvercommittedThreshold             100

volOverDeduplicatedThreshold          150

volReserveDepletedThreshold           90

volReserveNearlyDepletedThreshold     80

volSnapshotCountThreshold             250

volSnapshotFullThreshold              90

volSnapshotTooOldThreshold            52 weeks

vserverMonInterval                    Off

webUIMaxHeapSizeMB                    1024

webUIMaxPermGenSizeMB                 512

webUIMinHeapSizeMB                    256

webUIMinPermGenSizeMB                 128

webUIPort                             8123

[root@sys56 ~]# exit

Script done on Fri 19 Jul 2013 10:10:18 AM EDT

Re: Protection Manager shows failed SnapMirror update and filer shows the mirror completed successfully

All you NetApp Storage controllers are configured to use ssh as the protocol (from DFM perspective),

where as the default hostLoginProtocol is set as rsh.

Windows server cannot spawn the rsh command so it reports this error then executes via ssh and succeeds. (this is why your snapmirror updates are successful, but meanwhile, SC is kicked out with a failed message)

If you set your

hostLoginProtocol                 rsh

from rsh to ssh - you will not have this SC failures anymore.

hostLoginProtocol                 ssh

The way to change this option is

dfm option set hostLoginProtocol=ssh

FYI - This is a global option in DFM

Re: Protection Manager shows failed SnapMirror update and filer shows the mirror completed successfully

the DFM server is running on linux btw.

Re: Protection Manager shows failed SnapMirror update and filer shows the mirror completed successfully

that didn't do it! They are still failing.

Re: Protection Manager shows failed SnapMirror update and filer shows the mirror completed successfully

that didn't do it! They are still failing.

Re: Protection Manager shows failed SnapMirror update and filer shows the mirror completed successfully

Ok. I will check with my DFM experts.

What  I am noticing is the snapmirror update fails exactly after 5 minutes...looks like a timeout setting somewhere.

I will get back to you soon.

Re: Protection Manager shows failed SnapMirror update and filer shows the mirror completed successfully

dfm job details 177115

Please collect me the about output.

I will have my DFM expert review it