Data Backup and Recovery

SnapCreator Scheduler fires at wrong time

SVOLLRAT1
5,379 Views

Hi Everybody

I've created a SC Schedule Task to start an Domino-Archive Job every our 5 Min after the Full Hour.

But now when I check the Job Monitor I see the Job is always started in Minute 36.

Seems the Scheduler takes the last time a Schedule was triggered manually and counts onwards from there, totally ignoring the actually set time.

Is this intended by design or am I doing something wrong?

BR

Stefan

8 REPLIES 8

sivar
5,380 Views

Hello Stefan,

What is the snapcreator version?

What operating system the snapcreator server is running?

Will you be able to email the scdump for this config to sivar @ netapp.com ?

Thanks.

SVOLLRAT1
5,380 Views

Hi Sivar

Version is 4.0p1 but had same Issue on 3.6 too.

Both Systems running on RedHat Linux x64.

Freundliche Grüsse / Kind Regards

Stefan Vollrath

T-Systems Schweiz AG

Storage & Backup Operations

Stefan Vollrath

Storage Engineer

Murgenthalstrasse 12, CH-4901 Langenthal

+41 (0) 78 645 1076 (phone)

E-Mail: stefan.vollrath@t-systems.com

http://www.t-systems.ch <http://www.t-systems.ch/>

Notice: This transmittal and/or attachments may be privileged or confidential. If you are not the intended recipient, you are hereby notified that you have received this transmittal in error; any review, dissemination, or copying is strictly prohibited. If you received this transmittal in error, please notify us immediately by reply and immediately delete this message and all its attachments. Thank you.

Von: Siva Ramanathan

Gesendet: Dienstag, 23. Juli 2013 16:38

An: Vollrath, Stefan

Betreff: - Re: SnapCreator Scheduler fires at wrong time

NetApp Online Community <https://communities.netapp.com/index.jspa>

<http://media.netapp.com/images/divider-600x3.jpg>

Re: SnapCreator Scheduler fires at wrong time

created by Siva Ramanathan <https://communities.netapp.com/people/sivar> in Snap Creator - View the full discussion <https://communities.netapp.com/message/113549#113549> <http://media.netapp.com/images/divider-600x3.jpg>

Hello Stefan,

What is the snapcreator version?

What operating system the snapcreator server is running?

Will you be able to email the scdump for this config to sivar @ netapp.com ?

Thanks.

Reply to this message by replying to this email -or- go to the message on NetApp Community <https://communities.netapp.com/message/113549#113549>

Start a new discussion in Snap Creator by email <mailto:discussions-community-products_and_solutions-databases_and_enterprise_apps-snapcreator@communities.netapp.com> or at NetApp Community <https://communities.netapp.com/choose-container.jspa?contentType=1&containerType=14&container=2481>

Arora_Kapil
5,380 Views

Hi Stefan,

I have seen this behavior and I think it is documented in the IAG but I am not sure.

When you create an hourly schedule with 'x' minutes, the job runs after 'x' minutes for the first time and then repeats every hour.

Please try this and let us know if it works for you.

thanks,

Kapil

SVOLLRAT1
5,380 Views

Hi Kapil

Looks like it really has something to do with starting the Job manually.

At first I created the Schedule with @5 minutes and started a first dry run manually. From that time on it ran wrong.

Yesterday I modified the Schedule to @20 minutes and didn’t do anything manual anymore, now it seems to run at x:20 each time.

I don’t find that behavior logical. Especially in Production when Schedules get triggered manually all the Time this will certainly become a major issue.

Freundliche Grüsse / Kind Regards

Stefan Vollrath

T-Systems Schweiz AG

Storage & Backup Operations

Stefan Vollrath

Storage Engineer

Murgenthalstrasse 12, CH-4901 Langenthal

+41 (0) 78 645 1076 (phone)

E-Mail: stefan.vollrath@t-systems.com

http://www.t-systems.ch <http://www.t-systems.ch/>

Notice: This transmittal and/or attachments may be privileged or confidential. If you are not the intended recipient, you are hereby notified that you have received this transmittal in error; any review, dissemination, or copying is strictly prohibited. If you received this transmittal in error, please notify us immediately by reply and immediately delete this message and all its attachments. Thank you.

Von: Kapil Arora

Gesendet: Dienstag, 23. Juli 2013 17:20

An: Vollrath, Stefan

Betreff: - Re: SnapCreator Scheduler fires at wrong time

NetApp Online Community <https://communities.netapp.com/index.jspa>

<http://media.netapp.com/images/divider-600x3.jpg>

Re: SnapCreator Scheduler fires at wrong time

created by Kapil Arora <https://communities.netapp.com/people/akapila> in Snap Creator - View the full discussion <https://communities.netapp.com/message/113528#113528> <http://media.netapp.com/images/divider-600x3.jpg>

Hi Stefan,

I have seen this behavior and I think it is documented in the IAG but I am not sure.

When you create an hourly schedule with 'x' minutes, the job runs after 'x' minutes for the first time and then repeats every hour.

Please try this and let us know if it works for you.

thanks,

Kapil

Reply to this message by replying to this email -or- go to the message on NetApp Community <https://communities.netapp.com/message/113528#113528>

Start a new discussion in Snap Creator by email <mailto:discussions-community-products_and_solutions-databases_and_enterprise_apps-snapcreator@communities.netapp.com> or at NetApp Community <https://communities.netapp.com/choose-container.jspa?contentType=1&containerType=14&container=2481>

Arora_Kapil
5,380 Views

Hi Stefan,

In that case I would suggest that you don't use the hourly option and use the cron option instead.

You can use a cron expression like the following:

0 20 * * * ?

if you would like the job to run every hour when the clock hits 20 min.

e.g. 1:20, 2:20...and so on.

Also, you can get more examples and documentation on how to form your cron expressions here:

http://www.quartz-scheduler.org/documentation/quartz-1.x/tutorials/crontrigger

If you need help writing a cron expression for your needs I will be happy to help you.

Thanks,

Kapil

SVOLLRAT1
5,380 Views

Hi Kapil

So this is intended as a feature this way? If that is the case you seriously have to update and rename your GUI and Documentation.

Of course I can configure everything with cron but then I could also completely skip the SC-Schedule at all and do it in OS-Cron and Scripts too.

SC promises a comprehensive and easy to use experience which it does not live up to in this case.

Freundliche Grüsse / Kind Regards

Stefan Vollrath

T-Systems Schweiz AG

Storage & Backup Operations

Stefan Vollrath

Storage Engineer

Murgenthalstrasse 12, CH-4901 Langenthal

+41 (0) 78 645 1076 (phone)

E-Mail: stefan.vollrath@t-systems.com

http://www.t-systems.ch <http://www.t-systems.ch/>

Notice: This transmittal and/or attachments may be privileged or confidential. If you are not the intended recipient, you are hereby notified that you have received this transmittal in error; any review, dissemination, or copying is strictly prohibited. If you received this transmittal in error, please notify us immediately by reply and immediately delete this message and all its attachments. Thank you.

Von: Kapil Arora

Gesendet: Mittwoch, 24. Juli 2013 09:47

An: Vollrath, Stefan

Betreff: - Re: SnapCreator Scheduler fires at wrong time

NetApp Online Community <https://communities.netapp.com/index.jspa>

<http://media.netapp.com/images/divider-600x3.jpg>

Re: SnapCreator Scheduler fires at wrong time

created by Kapil Arora <https://communities.netapp.com/people/akapila> in Snap Creator - View the full discussion <https://communities.netapp.com/message/113576#113576> <http://media.netapp.com/images/divider-600x3.jpg>

Hi Stefan,

In that case I would suggest that you don't use the hourly option and use the cron option instead.

You can use a cron expression like the following:

0 20 * * * ?

if you would like the job to run every hour when the clock hits 20 min.

e.g. 1:20, 2:20...and so on.

Also, you can get more examples and documentation on how to form your cron expressions here:

http://www.quartz-scheduler.org/documentation/quartz-1.x/tutorials/crontrigger

If you need help writing a cron expression for your needs I will be happy to help you.

Thanks,

Kapil

Reply to this message by replying to this email -or- go to the message on NetApp Community <https://communities.netapp.com/message/113576#113576>

Start a new discussion in Snap Creator by email <mailto:discussions-community-products_and_solutions-databases_and_enterprise_apps-snapcreator@communities.netapp.com> or at NetApp Community <https://communities.netapp.com/choose-container.jspa?contentType=1&containerType=14&container=2481>

Arora_Kapil
5,380 Views

Hi Stefan,

We are looking into the issue that you have reported and while we are at it I suggested the cron option to you so that your work is not blocked.

There has been no change in the SC scheduler since the 3.x days and this has never been reported before.

We will keep you posted on our findings once we successfully recreate this issue in our environment.

Thanks,

Kapil

SVOLLRAT1
5,380 Views

Hi Kapil

In that case I interpreted your mail wrong, apologies for that.

As workaround cron is acceptable.

Freundliche Grüsse / Kind Regards

Stefan Vollrath

T-Systems Schweiz AG

Storage & Backup Operations

Stefan Vollrath

Storage Engineer

Murgenthalstrasse 12, CH-4901 Langenthal

+41 (0) 78 645 1076 (phone)

E-Mail: stefan.vollrath@t-systems.com

http://www.t-systems.ch <http://www.t-systems.ch/>

Notice: This transmittal and/or attachments may be privileged or confidential. If you are not the intended recipient, you are hereby notified that you have received this transmittal in error; any review, dissemination, or copying is strictly prohibited. If you received this transmittal in error, please notify us immediately by reply and immediately delete this message and all its attachments. Thank you.

Von: Kapil Arora

Gesendet: Mittwoch, 24. Juli 2013 10:00

An: Vollrath, Stefan

Betreff: - Re: SnapCreator Scheduler fires at wrong time

NetApp Online Community <https://communities.netapp.com/index.jspa>

<http://media.netapp.com/images/divider-600x3.jpg>

Re: SnapCreator Scheduler fires at wrong time

created by Kapil Arora <https://communities.netapp.com/people/akapila> in Snap Creator - View the full discussion <https://communities.netapp.com/message/113622#113622> <http://media.netapp.com/images/divider-600x3.jpg>

Hi Stefan,

We are looking into the issue that you have reported and while we are at it I suggested the cron option to you so that your work is not blocked.

There has been no change in the SC scheduler since the 3.x days and this has never been reported before.

We will keep you posted on our findings once we successfully recreate this issue in our environment.

Thanks,

Kapil

Reply to this message by replying to this email -or- go to the message on NetApp Community <https://communities.netapp.com/message/113622#113622>

Start a new discussion in Snap Creator by email <mailto:discussions-community-products_and_solutions-databases_and_enterprise_apps-snapcreator@communities.netapp.com> or at NetApp Community <https://communities.netapp.com/choose-container.jspa?contentType=1&containerType=14&container=2481>

Public