Subscribe

OCUM 6.x API to refresh storage systems

Basically title says it all.. I'm just curious invoking a storage discover via API quickly as i'm doing some testing on building volumes with WFA, so in order to prevent me from having to keep clicking the interfaces, I was hoping I can write something really quickly

Re: OCUM 6.x API to refresh storage systems

 

JGPSH -

 

Looking through in ZExplore I don't find anything in the DFM 5.2 or 6.0 APIs to do this.

 

I haven't looked at 6.x, but the auto discovery option in earlier versions of OCUM allowed for periodic re-scan of the network for new storage systems.


I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, IT Learning Solutions http://sg.itls.asia/netapp
(P.S. I appreciate 'kudos' on any helpful posts.)

Re: OCUM 6.x API to refresh storage systems

[ Edited ]

See my post here: http://community.netapp.com/t5/OnCommand-Storage-Management-Software-Discussions/WFA-Commands-to-Refresh-Cluster-managed-by-OCUM-6-X-and-Acquire-the-O...

 

I have  Refresh Cluster Command in the Dar file. If you don't wnat to use WFA, then see the command code. It tells what APIs to call.

 

sinhaa 

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.