cDOT - VSC vs. System Manager
2013-05-17 05:45 AM
I am here at a customer to implement the VSC with a cDOT System bellow. The customer has here two different department.
One for the whole vSphere environment and one for the storage environment. Of course both department knows the vsc-user
and the password to access the storage system.
After reading a lot of documentation it is not a good idea to give the vsc-user only access to the vserver management IP address
due to a lot of restrictions in the VSC like
• NFS path checking
• Reports on space that is shared by volumes using data deduplication
• EMS logging
• Storage-side log collections for the nSANity Diagnostic and Configuration Data Collector program
Unfortunately the vsc-user must have access to the cluster management IP.
AND here begins the problem.
If the vsc-user has access to the cluster management IP, even it is read only, all the vSphere guys can install the System Manager
(ok - if they have the .exe) , can login into the cluster, can read and watch all the stuff and can ask tons of stupid questions !
Everyone have experience with this problem, or have a solution, even it is only a workaround ?
Re: cDOT - VSC vs. System Manager
2013-05-24 09:22 AM
have the same issue..
there is the possibility to restrict the ip-access list with -firewall policy- on the cluster, but then system manager can be installed on allowed IP and it works again. so maybe there is no way to allow ontapi for the vsc-user using vsc-plugin, but not for the system-manager (application / user blocking).