-
FAS 2020 Config Questions
Gents I have done a factory reset on my FAS 2020 old system and after that i have lost my FC and ISCSI licences. Please advise is there anyway i can use this system ?
-
init failed on failed disk replacement
Im pretty green and still learning alot about netapp, had a disk fail, So i replaced it with a disk i already had unowned. i have done this only a few times, but this one is giving me Broken Details:: init failed If i Command line in, it will say FAILED under Pool Any thing i should try or maybe another disk? Thanks in…
-
How can I change the IP address of "ONTAP select Deploy(9.2RC)" DNS server?
I want to change the IP address of the DNS server that was set up when OntapSelectDeploy was constructed. I checked the user guide and the command list of the real machine, but I could not find the change command. # DNS server information is written in the /etc/network/interface # I'll try to modify, but this file is READ…
-
ONTAP Deploy VM removed
Hi all, recently, we have installed Ontap Onselect solution. It was 2 node Onselect HA cluster in one location. We were discussing what should we do, if the Ontap Deploy VM were removed. To enable all functions and features (storage failover capability etc.), are we supposed to deploy a secondary Deploy VM and restore the…
-
vm config backup in OnTAP Select
I just patched an OnTAP Select system for the first time. It went very smoothly, however one command that was listed in the Config Advisor document doesn't exist. One of the preliminary steps says: ----------------------------------------------------- 8. Backup ONTAP system information * Create a backup of ONTAP 9.5P6…
-
Moving OnTAP Deploy Functionality to a New VM
I need to move OnTAP Deploy functionality to a new VM with a new IP address. This instance of Deploy manages a single two node OnTAP Select cluster. I've created the new VM and began the procedure outlined here:…
-
OnTAP Select Possible Memory Issue
Background: We recently deployed two Dell servers to serve as ESX hosts for a small office in our company. Each host has 96GB of memory, 16GB of which was reserved for an OnTAP Select node (it's a 2 node HA Pair, small size). Despite the fact that they have 28 VMs, they use a very minimal amount of memory collectively. The…
-
encrytion for ontap select
Hi, is anyone using Volume(NVE) or Aggregate(NAE) encryption on their ontap selects? I can't find any documentation regarding this. I can see that the commands are available in the CLI. Any links to documentation or examples very welcome. thanks
-
No Network Protocols enabled on Ontap Select 9.9.1 eval single node cluster
I'm trying to experiment with NetWorker & OnTap backup NDMP interoperability to/from tape, and to this end I downloaded the OnTape Select eval software from here: https://mysupport.netapp.com/NOW/download/special/ontapselect_eval/ using the "OVF template installation to VMware ESXi without Deploy" option. As far as I can…
-
Recovery of an faulty ONTAP Select node
Have an interesting issue regarding recovery of an faulty ONTAP Select node. The issue is that we have an Ontap Select node where the root aggregate is corrupt after a reboot, if we execute the wafliron on the aggregate, it fails with “no valid checkpoint” and therefore the select node is not able to boot. We have tried…