-
E-Series Alerts and Monitoring
Do you know of any other methods by which we can monitor our E-Series? There is no SCOM Management Pack, not ActiveIQ integration, etc. So when we have a system/disk/etc. failure, we need to solely rely on the e-mail alerts that the SANtricity OS sends, which gets many times swallowed up with all of the other million mails…
-
Controller reset with RAID1-Volume on RAID6-DDP
If a "RAID1 volume" exists under a DDP(RAID Level 6), clicking an array operation (Add Capacity, View/Edit Settings) will cause a controller reset. Does anyone know anything about this issue? I encountered this problem while testing on a Lenovo DE6000F (E5700). ===========================================================…
-
minimum number of drives required for the E2800.
What is the minimum number of drives required for the E2800? RAID creation is not assumed. The reason for this question is that when four HDD drives are installed, the following warning is recorded every 24 hours. 「"May 8, 2025 1:55:54 PM","Warning","Controller","Shelf 99, Bay A","Insufficient storage or drive count for…
-
Looking for old log4j santricity doc
Hi, We decommissioned an old e5660 and at the time we recall that we were told that we had to also delete the supporting version of santricity due to the log4j issue and the fact that NetApp would not be patching the old EOS version of Santricity that supported the EOS e5660. We are now (much later) being challenged to…
-
Help with unlocking drives
I recently acquired Toshiba PX05SRQ384B drives from a reseller, which were previously used in a NetApp appliance. These drives are FIPS encrypted, and I have encountered difficulties in unlocking and formatting them for reuse. I have attempted to format and unlock the drives using both a Synology system and a TrueNAS…
-
Error Shows in NETAPP E2812
Dear Team, We are using NETAPP E2812 with SANtricity® OS Software Version 11.70.2. Recently we upgraded our HOST to Server 2022. Everything is working fine. But Device Manager shows error about NETAPP Universal Xport SCSI Disk Device. Refer attachment. Need help what we can check to resolve this issue. Regards, Shiju Chacko
-
Where can we download SANtricity PowerShell Toolkit
NetApp downloads in Support site contain broken links, and Developer Network is consistent, it also sends users to a broken link. https://devnet.netapp.com/santricity.php Is PowerShell Toolkit for SANtricity still available and where? If not, can the misleading links be removed?
-
What are the three sensors in SYMbol V2 thermal output?
It looks like values come from 3 sensors on each controller, but in any case, what does each value represent?
-
Simplified version of E-Series Performance Analyzer v3.0.0
As many of you are aware there's a nice NetApp repo with an E-Series performance monitor, InfluxDB and Grafana put together as one monolithic docker-compose setup which runs all these things on one VM: https://github.com/netApp/eseries-perf-analyzer I created a friendly fork of it with Collector as a stand-alone container:…
-
E-Series E2812 Failed disk replacement (OS 11.70.3)
Hi All, I got a broken disk today when I being volumes group extend implementation, I have order RMA and follow the manual to being fail disk replacement. After I login to SANtricity for checking status, the replacement disk was in unassigned. Volumes group now still in degree status, I has been put the disk assigned as…