-
FAS50 upgrade 9.16.1P7 to 9.17.1P10 - SnapCenter 5.0 EOVS compatibility?
Hi all, We are planning upgrade of a FAS50 from ONTAP 9.16.1P7 to 9.17.1P10. Reason for upgrade is controller panic/reboot related with mgwd becoming unresponsive. Fix for our issue is confirmed on 9.17.1P10 and not available on 9.16.1 patches. Before upgrade we want make sure nothing on our environment can be affected.…
-
100% CPU utilization on A30
When looking at a system node run -command sysstat -m I get half of the cpus as pegged at 100%: ntap01::> system node run -node ntap01-01 -command sysstat -mANY AVG CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 CPU16 CPU17 CPU18 CPU19 CPU20 CPU21 CPU22 CPU23 CPU24 CPU25 CPU26 CPU27…
-
ONTAP Base Immutabilty features
All, Does the standard ONTAP base (FAS2820) include any immutability feature by default, or do I need ONTAP ONE to get WORM functionality and SnapLock licensed and enabled to ensure immutability? TIA.
-
Request for Archived KB Article: DS4486 Shelf flashes H1 evacuation state after disk carrier replacement
Hi NetApp Community,I hope this message finds you well. I'm reaching out to kindly request access to the following Knowledge Base article: KB Title: DS4486_Shelf_flashes_H1_evacuation_state_after_disk_carrier_replacement Background & Context:We are currently managing a DS4486 disk shelf environment and recently encountered…
-
Reporting Nodes Added Automatically When Moving iSCSI-Based Volumes?
A colleague of mine indicated he's never reconfigured reporting nodes when moving volumes containing LUNs from one HA Pair in a cluster to another HA Pair. My understanding from NetApp documentation has been that you have to add the destination nodes as reporting nodes in advance of a volume move if you want to retain…
-
I need help configuring vscan with Trellix
Hello, In the past, we relied on McAfee & the antivirus connector to get vscan to work for our filers, but McAfee was retired and replaced with Trellix and i'm having difficulty getting that to work with vscan again. Please advise! Trellix is fully downloaded, and it's been given the IP for our machine but that's about it.…
-
event show empty
Hello the event show command gives no entry. ontap 9.1P2. Default installation. No event configuration. Event status show command shows some hits for many messages. I compared all the event [destination, config,route,...] with my simulator and it is the same. Simulator shows event messages ok. How is it possible? Thank you
-
Netapp ifgrp shows "partial" when all the associated ports are UP
Hello All, New netapp 4 node cluster has been setup and all the port are showing as "UP" while I issue "net port show" command. But "ifgrp show" command show "Partial" for some wierd reason. We are running Ontap 9.3.P1 version. Can someone help me to fix this ? Thank you
-
3 node cluster
Hi, I have 2 node cluster on 8.3 ,can i add additionl one node . Thanks Ram
-
Snap Mirror Procedure
Dear Experts, I am new to this Community and I am looking for some steps on how to create a SnapMirror ( Site to Site Replication) both our Sites Identical Replica of AFF700 with 9.3 P1 running on it and we are using it as a Unified Array ( Block & File ) Appreciate any help or any technical kb article that shows the…