-
Identify ONTAP LUN on Windows host
Hi all, I give up, I'll never be a Windows guy. Please enlighten me: With no SnapDrive on board, how is it possible to identify the name of an iSCSI LUN on an ONTAP 9 filer? I tried to match any sort of number from the outputs of ::> lun mapping show ::> lun show and ::> iscsi session show with the outputs of PS…
-
E2824 / 10GBase-T interface / direct attach with Cat6A patch cable
Server has ThinkSystem Broadcom 57454 10GBASE-T 4-port PCIe Ethernet Adapter and we would like to connect it directly without 10Gb switch with Netapp E2824 storage. Can't find in documentation this is supported so I wanted to ask here. Anybody with this kind of setup?
-
iSCSI Path Discovery
Hello We are setting up Hyper-V on Windows Server 2019. We earlier used to setup SAN on Windows 2016 using FC and we never had to add manual sessions. When we added all the target IP addresses in the target list, it only shows 1 path to the LUN, unlike ESXi which discovers all the paths as soon as you add targets. Then we…
-
How to validate if hosts have all the required ISCSI sessions (cli or powershell)
Anyone that knows how to validate if a host has created all the required ISCSI sessions? Validation from storage and not from host iscsi connection show -vserver svm_name Only shows the active session and not all possible sessions.
-
Data ONTAP DSM and Windows Server 2019
Does Windows Server 2019 require Data ONTAP DSM to be installed? This server is planned to be a Microsoft Hyper-V host and iSCSI initiator acccessing iSCSI LUNs on a 2 node AFF-A200 cluster. Thank you