-
IFGRP with AFF and FAS
Hi All, I have a four node cluster with 4x10G Ports each on both AFF C400 and FAS8300 with two 10G switches. My query is what should be the topology for achieving highest bandwidth and redundancy for NAS. Should I connect, two ports from each node to switch one and another two to switch two and create a interface group…
-
Ontap support for Bidirectional Forwarding Detection (BFD)?
Hi, do any of you know if Ontap supports the BFD Protocol? https://en.m.wikipedia.org/wiki/Bidirectional_Forwarding_Detection The documentation provided in the link below suggests using aggressive timers to detect fallouts but as far as I can tell the using BFD is a much more elegant solution to this problem.…
-
Cross Vlan communication
Hello, I am running ontap 9.7 and I am trying to figure out if there is a way to connect to a lif that is in a different vlan. To give some background on our network it is set up like this with firewall open from workstations to servers in each department 10.10.20.0/24 = Department A workstations 10.10.25.0/24 = Department…
-
"cluster_mgmt extended status: This LIF is down...
...because it is not configured in the network stack on node "2552-01". Wait a few minutes, then check the LIF's status again." I have a FAS2552 that I can't add to oncommand system manager because its cluster management address is not responding, due to the error message above. I don't know how to configure cluster_mgmt…