nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Recent Posts

NDMP Copy Size Mismatch
I am trying to run an NDMPcopy to backup 2 volumes from a 7-mode system to a CDOT SVM of the same name. We were using snapmirrors and realized we updated out of a version that allowed us to do so. We ran: node run -node nodeName priv set advanced ndmpcopy -d -sa ndmp:XXpasswordXX -st md5 -da ndmp:XXpasswordXX -dt md5…
"cluster_mgmt extended status: This LIF is down...
...because it is not configured in the network stack on node "2552-01". Wait a few minutes, then check the LIF's status again." I have a FAS2552 that I can't add to oncommand system manager because its cluster management address is not responding, due to the error message above. I don't know how to configure cluster_mgmt…
SVM Data LIF using Port 443 + 5986
Hi - Does enybody know why a SVM data LIF is listening on port 443 + 5986? I would expect this kind of traffic on a management port.
Best practice/recommendations - k8s multitenancy and encryption of data in-flight/at rest, OnTap SVM
Hi! I wasn't sure where to ask/discuss these topics but I'll post it here and see if I'm recommended to put this somewhere else... Background I'm currently looking for best practices with regards to k8s multitenancy and data encryption. We're looking at a three k8s-cluster solution maintained by Rancher. Multi tenancy I…
Convert .dar file: to be compatible with WFA 4.2
Hi, Can anyone help me converting the .dar file so that it is compatible with WFA 4.2 It could same me a lot of time!! Thanks. LINK to the file:https://community.netapp.com/fukiw75442/attachments/fukiw75442/oncommand-storage-management-software-discussions/12014/1/passwordupdate_Cdot.dar.zip
Hyper-V - Should I use volume snapshots or SnapManager for Hyper-V, whats the difference?
We have in the past had issues with our existing snapshots which are at a volume level (CSV data) on our filers - in that the data has been corrupted previously and was inconsistent. What is the recommended process for snapshots of CSV data where our VMs are stored? Should we be using SnapDrive for Hyper-V instead, if so…
Convert .dar file: to be compatible with WFA 4.2
Hi, Can anyone help me converting the .dar file so that it is compatible with WFA 4.2 It could same me a lot of time!! Thanks. LINK to the file:https://community.netapp.com/fukiw75442/attachments/fukiw75442/oncommand-storage-management-software-discussions/12014/1/passwordupdate_Cdot.dar.zip