-
NDMP Copy Size Mismatch
I am trying to run an NDMPcopy to backup 2 volumes from a 7-mode system to a CDOT SVM of the same name. We were using snapmirrors and realized we updated out of a version that allowed us to do so. We ran: node run -node nodeName priv set advanced ndmpcopy -d -sa ndmp:XXpasswordXX -st md5 -da ndmp:XXpasswordXX -dt md5…
-
Netapp multi-streaming within an individual content path is not enabled [CommvaultEvent Code 39:515]
Hi Netapp experts, Could anyone provide insight into the following error code: “NetApp multi-streaming within an individual content path is not enabled because we could not create a snapshot on the path [content_path_name] [Event Code 39:515]” in Commvault backup software? We attempted to enable NetApp multi-streaming…
-
Is NDMP on Ontap-V/Data ONTAP Edge possible?
Hello, My current situation is as follows: We used to be heavy on various NetApp arrays, and our legacy backup system was BackupExec12. Some tape backups from net apps were done using NDMP backups. Since we migrated loads to HCI and Cloud and decommissioned all Netapp hardware. If I need to restore an old NDMP backup from…
-
NaNdmpCopy - Non english character in the path -> ERROR
Hi, I have a problem during an restore the path changed during a command? Invoke-NaNdmpCopy -verbose 192.168.0.1 -SrcPath ".../3370_Bauträger/Formulare" 192.168.0.2 -DstPath ".../Formulare' -SrcCredential $cred -DstCredential $cred -SrcAuthType Md5 -DstAuthType Md5 ERROR: VERBOSE: [192.168.0.1] Log Message: LogType=2,…
-
NDMP Backup Configuration with CAB
Hi. My client it’s using NDMP for FlexGroups backups by using Netbackup 10.0 . We want to take advantage of CAB so we configured the “SVM-scoped” for all the data SVM’s and using as “preferred-interface-role” for NDMP the one configured data type lif of the vserver so we use a dedicated lif for moving backup data traffic…
-
NDMP Best Practices (OnTAP 9.6 or later)?
OnTAP 9.10.1 P3 Commvault (Simpana) 11.26 We have some CIFS-served file systems with millions of tiny files that are between difficult and impossible to backup using a Windows proxy to back up the shares as file systems. Encouraged by some past experiences with OnTAP 8.something and early Commvault 11 in another shop, I'm…
-
How to implement Cluster Aware Backup (CAB) Extension
Hi Everyone, One of our customers is interested in using Bacula NDMP software with an ONTAP 9.8 storage system: https://www.baculasystems.com/ndmp-backup/ The software doesn't support the NetApp CAB extension (meaning that it only runs in node scope currently) and the customer has contacted the Bacula software vendor to…
-
No Network Protocols enabled on Ontap Select 9.9.1 eval single node cluster
I'm trying to experiment with NetWorker & OnTap backup NDMP interoperability to/from tape, and to this end I downloaded the OnTape Select eval software from here: https://mysupport.netapp.com/NOW/download/special/ontapselect_eval/ using the "OVF template installation to VMware ESXi without Deploy" option. As far as I can…
-
Backup exec support matrix
Hello, NetApp support matrix NDMP support to Backup Exec 20, may we know when will support Backup Exec 21? Best regards, Chung
-
Ndmpcopy visibility error
I have an error when using ndmpcopy, somebody can helpme? Log: Volume Visibility check failed for volume system node run -node DSIPMXNAS01-01 -command ndmpcopy -sa ndmpuser -da ndmpuser 10.48.202.103:/SVM_NAS01_01_CIFS/vol_NX_Arranque/.snapshot/weekly1/IQTITRENDVIEW/ Ndmpcopy: Starting copy [ 136 ] ... Ndmpcopy:…