-
Do we have a link for ONTAP Simulator 7.3 (7-mode) and Ontap 8.1.3(7Mode)
Does anyone know where I could get my hands on ONTAP Simulator 7.3 (7 mode), Ontap 8.1.3(7Mode), and NetApp OnCommand System Manager 3.1(OSCM windows installer) or who to talk to that might have it?
-
NDMP Copy Size Mismatch
I am trying to run an NDMPcopy to backup 2 volumes from a 7-mode system to a CDOT SVM of the same name. We were using snapmirrors and realized we updated out of a version that allowed us to do so. We ran: node run -node nodeName priv set advanced ndmpcopy -d -sa ndmp:XXpasswordXX -st md5 -da ndmp:XXpasswordXX -dt md5…
-
Flash Pool failed! NetApp FAS2240 - 7-mode
Hi NetApp Community, I have a NetApp FAS2240 running Data Ontap 8.2 in 7-mode. We seem to have hit the following bug where the SSD disks have been up for 70,000 hours / 8 years. The SSD disks which were configured as the FlashPool have failed as the firmware was not updated.…
-
Access storage controller using ssh-keys
Hello All, I have the following system below: VERSION=NetApp Release 8.2.4P6 7-Mode: Wed Jan 11 01:07:08 PST 2017 SYSTEM_ID=05369xxxxx SERIAL_NUM=451438xxxxxx HOSTNAME=fasinfxxxxxx We are trying to setup SSH authentication with Linux. We have the following old KB and info but it appears to have been removed: **** Linux…
-
Disable SMBv1 DC connectivity issue
We have v8.2.5P1 version of 7Mode, and (nervously) decided to disable SMBv1 options recently. smb1.enable no no smb1.client.enable no no Everything seemed OK for a while until the NetApp lost connectivity to the DC and CIFS access was lost. Any idea why we saw the delayed connectivity issues and is there a setting we…
-
how to change an ip of a virtual interface and name of a filer NetApp Release 8.2.3P3 7-Mode
Hi i need to change the name and the ip of a vif interface on a 7-mode netapp filer could you please advise me on the best way first i m thinking of editing /etc/hosts with wordpad by cifs acess name:f-ammout new name f-ammout_old vif inteface: giga0 here content of hosts file ... 127.0.0.1 localhost old_ip f-ammout…
-
Is it possible to replace user lookup in /etc/passwd by ldap (7-Mode)?
We urgently needed some storage, so I decided to reinstall an old Netapp FAS2240-4 with Ontap 8.2.5 in 7-Mode. I do not have any newer licenses and there is no support for this FAS anymore. I have configured the FAS for access with CIFS and NFS in an Active Directory Domain. I created a volume with NTFS Security Style and…