Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 512 MB Testing SIO Testing LCD Probing devices Testing 512MB 16MB chunks 1 to 16MB 16 to 32MB 32 to 48MB 48 to 64MB 64 to 80MB 80 to 96MB 96 to 112MB 112 to 128MB 128 to 144MB 144 to 160MB 160 to 176MB 176 to 192MB 192 to 208MB 208 to 224MB 224 to 240MB 240 to 256MB 256 to 272MB 272 to 288MB 288 to 304MB 304 to 320MB 320 to 336MB 336 to 352MB 352 to 368MB 368 to 384MB 384 to 400MB 400 to 416MB 416 to 432MB 432 to 448MB 448 to 464MB 464 to 480MB 480 to 496MB 496 to 512MB Complete Finding image... Loading 3 2 disk@1 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 20% 21% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 26% 27% 27% 27% 28% 28% 28% 29% 29% 29% 30% 30% 30% 30% 31% 31% 31% 32% 32% 32% 33% 33% 33% 34% 34% 34% 35% 35% 35% 36% 36% 36% 37% 37% 37% 38% 38% 38% 39% 39% 39% 40% 40% 40% 40% 41% 41% 41% 42% 42% 42% 43% 43% 43% 44% 44% 44% 45% 45% 45% 46% 46% 46% 47% 47% 47% 48% 48% 48% 49% 49% 49% 50% 50% 50% 50% 51% 51% 51% 52% 52% 52% 53% 53% 53% 54% 54% 54% 55% 55% 55% 56% 56% 56% 57% 57% 57% 58% 58% 58% 59% 59% 59% 60% 60% 60% 60% 61% 61% 61% 62% 62% 62% 63% 63% 63% 64% 64% 64% 65% 65% 65% 66% 66% 66% 67% 67% 67% 68% 68% 68% 69% 69% 69% 70% 70% 70% 70% 71% 71% 71% 72% 72% 72% 73% 73% 73% 74% 74% 74% 75% 75% 75% 76% 76% 76% 77% 77% 77% 78% 78% 78% 79% 79% 79% 80% 80% 80% 80% 81% 81% 81% 82% 82% 82% 83% 83% 83% 84% 84% 84% 85% 85% 85% 86% 86% 86% 87% 87% 87% 88% 88% 88% 89% 89% 89% 90% 90% 90% 90% 91% 91% 91% 92% 92% 92% 93% 93% 93% 94% 94% 94% 95% 95% 95% 96% 96% 96% 97% 97% 97% 98% 98% 98% 99% 99% 99% 100% Starting Press CTRL-C for special boot menu ................................................................................................................ Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.10(0xfffffc00012deee0, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.11(0xfffffc00012df140, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.12(0xfffffc00012df3a0, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.13(0xfffffc00012df600, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.14(0xfffffc00012df860, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.15(0xfffffc00012dfac0, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. ispfc: Fibre Channel adapter 7 appears to be unattached/disconnected. If adapter is in use, check cabling and seating of LRC cards in disk shelves. Thu Jan 1 00:00:00 GMT [ispfc_init_2:error]: Initialization failed on Fibre Channel adapter 7. NetApp Release 6.1R1: Fri Apr 20 03:08:22 PDT 2001 Copyright (c) 1992-2001 Network Appliance, Inc. Starting boot on Fri Aug 1 20:22:12 GMT 2008 Fri Aug 1 20:22:42 GMT [net_e0:info]: Ethernet e0: Link up. raid_checklabels(0): disk 6.2 has time/generation 1217069933/172 whereas disk 6.13 has time/generation 1217604717/176 raid_checklabels(0): disk 6.2 has time/generation 1217069933/172 whereas disk 6.13 has time/generation 1217604717/176 Fri Aug 1 20:22:52 GMT [rc:EMERGENCY]: Root volume vol0, RAID group 0 is missing 3 disks and is unusable. Fri Aug 1 20:22:52 GMT [rc:CRITICAL]: Volume vol0 is missing 3 disks from RAID group 0 and is being taken offline for this boot. Fri Aug 1 20:22:52 GMT [rc:ALERT]: Cluster monitor: Root and Mailbox disks are uninitialized on local system. Fri Aug 1 20:22:52 GMT [rc:ALERT]: Cluster monitor: Root and Mailbox disks are uninitialized on partner system. Fri Aug 1 20:22:52 GMT [rc:ALERT]: Cluster monitor: Root and Mailbox disks are uninitialized on partner system. Disk 6.5 is reserved for "hot spare" 1 disk is reserved for "hot spare". Fri Aug 1 20:22:52 GMT [cf.disk.invalidMailbox:error]: Cluster monitor: partner mailbox disk data invalid Fri Aug 1 20:22:52 GMT [raid.assim.outofdateNdisks:ALERT]: More than one disk in RAID group 0 of volume vol0 has a valid label not consistent with all the others. These disks are assumed to be out of date; their contents cannot be restored. Fri Aug 1 20:22:53 GMT [rc:error]: There is an out-of-date disk 6.2 originally belonging to volume vol0, RAID group 0 Fri Aug 1 20:22:53 GMT [mgr.boot.noBloop:CRITICAL]: No disks were detected on Fibre Channel port B; this node will be unable to takeover correctly PANIC: No root volume found. in process rc on release NetApp Release 6.1R1 on Fri Aug 1 20:22:54 2008 version: NetApp Release 6.1R1: Fri Apr 20 03:08:22 PDT 2001 cc flags: 1 ::::::::::halt after panic during system initialization ok Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 512 MB Testing SIO Testing LCD Probing devices Testing 512MB 16MB chunks 1 to 16MB 16 to 32MB 32 to 48MB 48 to 64MB 64 to 80MB 80 to 96MB 96 to 112MB 112 to 128MB 128 to 144MB 144 to 160MB 160 to 176MB 176 to 192MB 192 to 208MB 208 to 224MB 224 to 240MB 240 to 256MB 256 to 272MB 272 to 288MB 288 to 304MB 304 to 320MB 320 to 336MB 336 to 352MB 352 to 368MB 368 to 384MB 384 to 400MB 400 to 416MB 416 to 432MB 432 to 448MB 448 to 464MB 464 to 480MB 480 to 496MB 496 to 512MB Complete Finding image... Loading isa floppy Floppy not first boot disk Booting from floppy failed. Retrying from scsi-disk Loading 3 2 disk@1 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 20% 21% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 26% 27% 27% 27% 28% 28% 28% 29% 29% 29% 30% 30% 30% 30% 31% 31% 31% 32% 32% 32% 33% 33% 33% 34% 34% 34% 35% 35% 35% 36% 36% 36% 37% 37% 37% 38% 38% 38% 39% 39% 39% 40% 40% 40% 40% 41% 41% 41% 42% 42% 42% 43% 43% 43% 44% 44% 44% 45% 45% 45% 46% 46% 46% 47% 47% 47% 48% 48% 48% 49% 49% 49% 50% 50% 50% 50% 51% 51% 51% 52% 52% 52% 53% 53% 53% 54% 54% 54% 55% 55% 55% 56% 56% 56% 57% 57% 57% 58% 58% 58% 59% 59% 59% 60% 60% 60% 60% 61% 61% 61% 62% 62% 62% 63% 63% 63% 64% 64% 64% 65% 65% 65% 66% 66% 66% 67% 67% 67% 68% 68% 68% 69% 69% 69% 70% 70% 70% 70% 71% 71% 71% 72% 72% 72% 73% 73% 73% 74% 74% 74% 75% 75% 75% 76% 76% 76% 77% 77% 77% 78% 78% 78% 79% 79% 79% 80% 80% 80% 80% 81% 81% 81% 82% 82% 82% 83% 83% 83% 84% 84% 84% 85% 85% 85% 86% 86% 86% 87% 87% 87% 88% 88% 88% 89% 89% 89% 90% 90% 90% 90% 91% 91% 91% 92% 92% 92% 93% 93% 93% 94% 94% 94% 95% 95% 95% 96% 96% 96% 97% 97% 97% 98% 98% 98% 99% 99% 99% 100% Starting Press CTRL-C for special boot menu ................................................................................................................ Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.10(0xfffffc00012deee0, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.11(0xfffffc00012df140, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.12(0xfffffc00012df3a0, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.13(0xfffffc00012df600, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.14(0xfffffc00012df860, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.15(0xfffffc00012dfac0, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. ispfc: Fibre Channel adapter 7 appears to be unattached/disconnected. If adapter is in use, check cabling and seating of LRC cards in disk shelves. Thu Jan 1 00:00:00 GMT [ispfc_init_2:error]: Initialization failed on Fibre Channel adapter 7. NetApp Release 6.1R1: Fri Apr 20 03:08:22 PDT 2001 Copyright (c) 1992-2001 Network Appliance, Inc. Starting boot on Fri Aug 1 20:25:05 GMT 2008 Fri Aug 1 20:25:34 GMT [net_e0:info]: Ethernet e0: Link up. raid_checklabels(0): disk 6.2 has time/generation 1217069933/172 whereas disk 6.13 has time/generation 1217604717/176 raid_checklabels(0): disk 6.2 has time/generation 1217069933/172 whereas disk 6.13 has time/generation 1217604717/176 Fri Aug 1 20:25:44 GMT [rc:EMERGENCY]: Root volume vol0, RAID group 0 is missing 3 disks and is unusable. Fri Aug 1 20:25:44 GMT [rc:CRITICAL]: Volume vol0 is missing 3 disks from RAID group 0 and is being taken offline for this boot. Fri Aug 1 20:25:44 GMT [rc:ALERT]: Cluster monitor: Root and Mailbox disks are uninitialized on local system. Fri Aug 1 20:25:44 GMT [rc:ALERT]: Cluster monitor: Root and Mailbox disks are uninitialized on partner system. Fri Aug 1 20:25:44 GMT [rc:ALERT]: Cluster monitor: Root and Mailbox disks are uninitialized on partner system. Disk 6.5 is reserved for "hot spare" 1 disk is reserved for "hot spare". Fri Aug 1 20:25:44 GMT [cf.disk.invalidMailbox:error]: Cluster monitor: partner mailbox disk data invalid Fri Aug 1 20:25:44 GMT [raid.assim.outofdateNdisks:ALERT]: More than one disk in RAID group 0 of volume vol0 has a valid label not consistent with all the others. These disks are assumed to be out of date; their contents cannot be restored. Fri Aug 1 20:25:45 GMT [rc:error]: There is an out-of-date disk 6.2 originally belonging to volume vol0, RAID group 0 Fri Aug 1 20:25:45 GMT [mgr.boot.noBloop:CRITICAL]: No disks were detected on Fibre Channel port B; this node will be unable to takeover correctly PANIC: No root volume found. in process rc on release NetApp Release 6.1R1 on Fri Aug 1 20:25:46 2008 version: NetApp Release 6.1R1: Fri Apr 20 03:08:22 PDT 2001 cc flags: 1 ::::::::::halt after panic during system initialization ok Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 512 MB Testing SIO Testing LCD Probing devices Testing 512MB 16MB chunks 1 to 16MB 16 to 32MB 32 to 48MB 48 to 64MB 64 to 80MB 80 to 96MB 96 to 112MB 112 to 128MB 128 to 144MB 144 to 160MB 160 to 176MB 176 to 192MB 192 to 208MB 208 to 224MB 224 to 240MB 240 to 256MB 256 to 272MB 272 to 288MB 288 to 304MB 304 to 320MB 320 to 336MB 336 to 352MB 352 to 368MB 368 to 384MB 384 to 400MB 400 to 416MB 416 to 432MB 432 to 448MB 448 to 464MB 464 to 480MB 480 to 496MB 496 to 512MB Complete Finding image... Loading isa floppy 12% 100% 0% 1% 2% 3% 4% 5% 6% 7% 8% 10% 11% 12% 13% 14% 15% 16% 17% 19% 20% 21% 22% 23% 24% 25% 26% 27% 29% 30% 31% 32% 33% 34% 35% 36% 37% 39% 40% 41% 42% 43% 44% 45% 46% 48% 49% 50% 51% 52% 53% 54% 55% 56% 58% 59% 60% 61% 62% 63% 64% 65% 67% 68% 69% 70% 71% 72% 73% 74% 75% 77% 78% 79% 80% 81% 82% 83% 84% 86% 87% 88% 89% 90% 91% 92% 93% 94% 96% 97% 98% 99% 100% Insert Disk #2 of 6 Insert Disk #2 of 6 Insert Disk #2 of 6 0% 1% 2% 3% 4% 5% 6% 7% 8% 10% 11% 12% 13% 14% 15% 16% 17% 18% 20% 21% 22% 23% 24% 25% 26% 27% 28% 30% 31% 32% 33% 34% 35% 36% 37% 39% 40% 41% 42% 43% 44% 45% 46% 47% 49% 50% 51% 52% 53% 54% 55% 56% 57% 59% 60% 61% 62% 63% 64% 65% 66% 67% 69% 70% 71% 72% 73% 74% 75% 76% 77% 79% 80% 81% 82% 83% 84% 85% 86% 87% 89% 90% 91% 92% 93% 94% 95% 96% 98% 99% 100% Insert Disk #3 of 6 0% 1% 2% 3% 4% 5% 6% 7% 8% 10% 11% 12% 13% 14% 15% 16% 17% 18% 20% 21% 22% 23% 24% 25% 26% 27% 28% 30% 31% 32% 33% 34% 35% 36% 37% 39% 40% 41% 42% 43% 44% 45% 46% 47% 49% 50% 51% 52% 53% 54% 55% 56% 57% 59% 60% 61% 62% 63% 64% 65% 66% 67% 69% 70% 71% 72% 73% 74% 75% 76% 77% 79% 80% 81% 82% 83% 84% 85% 86% 87% 89% 90% 91% 92% 93% 94% 95% 96% 98% 99% 100% Insert Disk #4 of 6 0% 1% 2% 3% 4% 5% 6% 7% 8% 10% 11% 12% 13% 14% 15% 16% 17% 18% 20% 21% 22% 23% 24% 25% 26% 27% 28% 30% 31% 32% 33% 34% 35% 36% 37% 39% 40% 41% 42% 43% 44% 45% 46% 47% 49% 50% 51% 52% 53% 54% 55% 56% 57% 59% 60% 61% 62% 63% 64% 65% 66% 67% 69% 70% 71% 72% 73% 74% 75% 76% 77% 79% 80% 81% 82% 83% 84% 85% 86% 87% 89% 90% 91% 92% 93% 94% 95% 96% 98% 99% 100% Insert Disk #5 of 6 0% 1% 2% 3% 4% 5% 6% 7% 8% 10% 11% 12% 13% 14% 15% 16% 17% 18% 20% 21% 22% 23% 24% 25% 26% 27% 28% 30% 31% 32% 33% 34% 35% 36% 37% 39% 40% 41% 42% 43% 44% 45% 46% 47% 49% 50% 51% 52% 53% 54% 55% 56% 57% 59% 60% 61% 62% 63% 64% 65% 66% 67% 69% 70% 71% 72% 73% 74% 75% 76% 77% 79% 80% 81% 82% 83% 84% 85% 86% 87% 89% 90% 91% 92% 93% 94% 95% 96% 98% 99% 100% Insert Disk #6 of 6 0% 8% 17% 26% 35% 43% 52% 61% 70% 78% 87% 96% 100% Starting Press CTRL-C for floppy boot menu ........................................................................................................................................................................................................................................................................................................................................ ispfc: Fibre Channel adapter 7 appears to be unattached/disconnected. If adapter is in use, check cabling and seating of LRC cards in disk shelves. Fri Aug 1 20:35:11 GMT [ispfc_init_2:error]: Initialization failed on Fibre Channel adapter 7. NetApp Release 6.3: Wed Aug 7 23:04:57 PDT 2002 Copyright (c) 1992-2002 Network Appliance, Inc. Starting boot on Fri Aug 1 20:34:42 GMT 2008 Fri Aug 1 20:35:16 GMT [net_e0:info]: Ethernet e0: Link up. Swarm Replay Stats Daemon Started Fri Aug 1 20:35:16 GMT [config.noBloop:CRITICAL]: No disks were detected on Fibre Channel port B; this node will be unable to takeover correctly This boot is of OS version: NetApp Release 6.3. The last time this filer booted, it used OS version: NetApp Release 6.1R1. This boot is of an OS which has RAID version 5 and WAFL version 28; The last time this filer booted, it used an OS version that contained RAID version 4 and WAFL version 13. If you do not want your file system upgraded, choose Maintenance mode or reboot with the correct OS version. If you upgrade, and then want to return to the previous OS, you will need to revert your filesystem. (1) Normal boot. (2) Boot without /etc/rc. (3) Change password. (4) Initialize all disks. (5) Maintenance mode boot. Selection (1-5)? Fri Aug 1 20:35:30 GMT [ses_admin:error]: XL500 shelf 1 on channel 6 reports a critical condition Power Supply Element 2: critical status power supply failed Fri Aug 1 20:35:31 GMT [ses_admin:error]: XL500 shelf 0 on channel 6 reports a critical condition Power Supply Element 2: critical status power supply failed Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 512 MB Testing SIO Testing LCD Probing devices Testing 512MB 16MB chunks 1 to 16MB 16 to 32MB 32 to 48MB 48 to 64MB 64 to 80MB 80 to 96MB 96 to 112MB 112 to 128MB 128 to 144MB 144 to 160MB 160 to 176MB 176 to 192MB 192 to 208MB 208 to 224MB 224 to 240MB 240 to 256MB 256 to 272MB 272 to 288MB 288 to 304MB 304 to 320MB 320 to 336MB 336 to 352MB 352 to 368MB 368 to 384MB 384 to 400MB 400 to 416MB 416 to 432MB 432 to 448MB 448 to 464MB 464 to 480MB 480 to 496MB 496 to 512MB Complete Finding image... Loading isa floppy 12% 100% 0% 1% 2% 3% 4% 5% 6% 7% 8% 10% 11% 12% 13% 14% 15% 16% 17% 19% 20% 21% 22% 23% 24% 25% 26% 27% 29% 30% 31% 32% 33% 34% 35% 36% 37% 39% 40% 41% 42% 43% 44% 45% 46% 48% 49% 50% 51% 52% 53% 54% 55% 56% 58% 59% 60% 61% 62% 63% 64% 65% 67% 68% 69% 70% 71% 72% 73% 74% 75% 77% 78% 79% 80% 81% 82% 83% 84% 86% 87% 88% 89% 90% 91% 92% 93% 94% 96% 97% 98% 99% 100% Insert Disk #2 of 6 Insert Disk #2 of 6 Insert Disk #2 of 6 Insert Disk #2 of 6 Insert Disk #2 of 6 Insert Disk #2 of 6 Insert Disk #2 of 6 Insert Disk #2 of 6 Insert Disk #2 of 6 Insert Disk #2 of 6 0% 1% 2% 3% 4% 5% 6% 7% 8% 10% 11% 12% 13% 14% 15% 16% 17% 18% 20% 21% 22% 23% 24% 25% 26% 27% 28% 30% 31% 32% 33% 34% 35% 36% 37% 39% 40% 41% 42% 43% 44% 45% 46% 47% 49% 50% 51% 52% 53% 54% 55% 56% 57% 59% 60% 61% 62% 63% 64% 65% 66% 67% 69% 70% 71% 72% 73% 74% 75% 76% 77% 79% 80% 81% 82% 83% 84% 85% 86% 87% 89% 90% 91% 92% 93% 94% 95% 96% 98% 99% 100% Insert Disk #3 of 6 Insert Disk #3 of 6 Insert Disk #3 of 6 Insert Disk #3 of 6 Insert Disk #3 of 6 Insert Disk #3 of 6 Insert Disk #3 of 6 Insert Disk #3 of 6 0% 1% 2% 3% 4% 5% 6% 7% 8% 10% 11% 12% 13% 14% 15% 16% 17% 18% 20% 21% 22% 23% 24% 25% 26% 27% 28% 30% 31% 32% 33% 34% 35% 36% 37% 39% 40% 41% 42% 43% 44% 45% 46% 47% 49% 50% 51% 52% 53% 54% 55% 56% 57% 59% 60% 61% 62% 63% 64% 65% 66% 67% 69% 70% 71% 72% 73% 74% 75% 76% 77% 79% 80% 81% 82% 83% 84% 85% 86% 87% 89% 90% 91% 92% 93% 94% 95% 96% 98% 99% 100% Insert Disk #4 of 6 Insert Disk #4 of 6 Insert Disk #4 of 6 Insert Disk #4 of 6 Insert Disk #4 of 6 Insert Disk #4 of 6 Insert Disk #4 of 6 Insert Disk #4 of 6 Insert Disk #4 of 6 Insert Disk #4 of 6 Insert Disk #4 of 6 Insert Disk #4 of 6 0% 1% 2% 3% 4% 5% 6% 7% 8% 10% 11% 12% 13% 14% 15% 16% 17% 18% 20% 21% 22% 23% 24% 25% 26% 27% 28% 30% 31% 32% 33% 34% 35% 36% 37% 39% 40% 41% 42% 43% 44% 45% 46% 47% 49% 50% 51% 52% 53% 54% 55% 56% 57% 59% 60% 61% 62% 63% 64% 65% 66% 67% 69% 70% 71% 72% 73% 74% 75% 76% 77% 79% 80% 81% 82% 83% 84% 85% 86% 87% 89% 90% 91% 92% 93% 94% 95% 96% 98% 99% 100% Insert Disk #5 of 6 0% 1% 2% 3% 4% 5% 6% 7% 8% 10% 11% 12% 13% 14% 15% 16% 17% 18% 20% 21% 22% 23% 24% 25% 26% 27% 28% 30% 31% 32% 33% 34% 35% 36% 37% 39% 40% 41% 42% 43% 44% 45% 46% 47% 49% 50% 51% 52% 53% 54% 55% 56% 57% 59% 60% 61% 62% 63% 64% 65% 66% 67% 69% 70% 71% 72% 73% 74% 75% 76% 77% 79% 80% 81% 82% 83% 84% 85% 86% 87% 89% 90% 91% 92% 93% 94% 95% 96% 98% 99% 100% Insert Disk #6 of 6 0% 8% 17% 26% 35% 43% 52% 61% 70% 78% 87% 96% 100% Starting Press CTRL-C for floppy boot menu ........................................................................................................................................................................................................................................................................................................................................ NetApp Release 6.3: Wed Aug 7 23:04:57 PDT 2002 Copyright (c) 1992-2002 Network Appliance, Inc. Starting boot on Fri Aug 1 20:52:05 GMT 2008 Fri Aug 1 20:52:34 GMT [net_e0:info]: Ethernet e0: Link up. Fri Aug 1 20:52:35 GMT [ispfc_timeout:warning]: 6.9 (0x02000009) (0xfffffc0002378ef8,0x12,0/0,0/0/0,2/0): command timeout, quiescing drive to allow outstanding I/O to complete. Fri Aug 1 20:52:38 GMT [ispfc_timeout:error]: 6.9 (0x02000009): global device timer timeout, initiating device recovery. Fri Aug 1 20:52:48 GMT [ispfc_timeout:warning]: 6.9 (0x02000009) (0xfffffc0002378ef8,0x12,0/0,0/0/0,3/0): command timeout, quiescing drive to allow outstanding I/O to complete. Fri Aug 1 20:52:51 GMT [ispfc_timeout:error]: 6.9 (0x02000009): global device timer timeout, initiating device recovery. Fri Aug 1 20:53:00 GMT [ispfc_timeout:warning]: 6.9 (0x02000009) (0xfffffc0002378ef8,0x12,0/0,0/0/0,4/0): command timeout, quiescing drive to allow outstanding I/O to complete. Fri Aug 1 20:53:03 GMT [ispfc_timeout:error]: 6.9 (0x02000009): global device timer timeout, initiating device recovery. Fri Aug 1 20:53:03 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.9: request failed after try #1: cdb 0x12. Fri Aug 1 20:53:18 GMT [scsi.cmd.selectionTimeout:error]: Device 7.68: Adapter/target error: HA status 0x7: cdb 0x12. Targeted device did not respond to requested I/O. I/O will be retried. Fri Aug 1 20:53:18 GMT [scsi.cmd.noMorePaths:error]: Device 7.68: No more paths to device: cdb 0x12. All retries have failed. Fri Aug 1 20:53:18 GMT [scsi.cmd.selectionTimeout:error]: Device 7.68: Adapter/target error: HA status 0x7: cdb 0x1b. Targeted device did not respond to requested I/O. I/O will be retried. Fri Aug 1 20:53:18 GMT [scsi.cmd.noMorePaths:error]: Device 7.68: No more paths to device: cdb 0x1b. All retries have failed. Fri Aug 1 20:53:18 GMT [scsi.cmd.adapterHardwareError:error]: Device 7.68: Adapter detected hardware error: HA status 0x6: cdb 0x1b. Fri Aug 1 20:53:18 GMT [scsi.cmd.noMorePaths:error]: Device 7.68: No more paths to device: cdb 0x1b. All retries have failed. Fri Aug 1 20:53:18 GMT [scsi.cmd.adapterHardwareError:error]: Device 7.68: Adapter detected hardware error: HA status 0x6: cdb 0x1b. Fri Aug 1 20:53:18 GMT [scsi.cmd.noMorePaths:error]: Device 7.68: No more paths to device: cdb 0x1b. All retries have failed. Fri Aug 1 20:53:18 GMT [scsi.cmd.adapterHardwareError:error]: Device 7.68: Adapter detected hardware error: HA status 0x6: cdb 0x1b. Fri Aug 1 20:53:18 GMT [scsi.cmd.noMorePaths:error]: Device 7.68: No more paths to device: cdb 0x1b. All retries have failed. ispfc: 14 loop-initialization events seen in 60 seconds on Fibre Channel adapter 7: indicates loop stability problem. Fri Aug 1 20:55:37 GMT [scsi.cmd.pastTimeToLive:error]: Device 7.4: request failed after try #1: cdb 0x1b. Fri Aug 1 20:55:37 GMT [scsi.cmd.pastTimeToLive:error]: Device 7.4: request failed after try #4: cdb 0x1c. Fri Aug 1 20:55:38 GMT [ses_admin:info]: initiating rescan on adapter 7 Fri Aug 1 20:55:49 GMT [ispfc_init_2:warning]: Resetting Fibre Channel adapter 7. Fri Aug 1 20:56:56 GMT [ispfc_init_2:warning]: Resetting Fibre Channel adapter 7. Fri Aug 1 20:57:11 GMT [scsi.cmd.pastTimeToLive:error]: Device 7.4: request failed after try #1: cdb 0x1b. ispfc: 10 loop-initialization events seen in 60 seconds on Fibre Channel adapter 7: indicates loop stability problem. Fri Aug 1 20:58:23 GMT [ses_admin:error]: Disk 7.4 not detected by Enclosure Services. Fri Aug 1 20:58:23 GMT [ses_admin:error]: Possible actual addresses: 7.9 (shelf 1 bay 1) *** Drive loop addresses failed consistency check. *** Additional information is being syslogged. *** Booting in maintenance mode because of loop inconsistency ... Fri Aug 1 20:58:24 GMT [ses_admin:error]: XL500 shelf 1 on channel 6 reports a critical condition Power Supply Element 2: critical status power supply failed Fri Aug 1 20:58:24 GMT [ses_admin:error]: XL500 shelf 0 on channel 6 reports a critical condition Power Supply Element 2: critical status power supply failed Fri Aug 1 20:58:24 GMT [ses_admin:error]: XL500 shelf 0 on channel 7 reports a critical condition Power Supply Element 2: critical status power supply failed Fri Aug 1 20:58:30 GMT [ses_admin:error]: XL500 shelf 1 on channel 7 reports a critical condition Power Supply Element 2: critical status power supply failed Fri Aug 1 20:59:19 GMT [ispfc_timeout:warning]: 7.4 (0x03000004) (0xfffffc0002377a58,0x1b,0/0,3/0/0,611/0): command timeout, quiescing drive to allow outstanding I/O to complete. Fri Aug 1 20:59:22 GMT [ispfc_timeout:error]: 7.4 (0x03000004): global device timer timeout, initiating device recovery. Fri Aug 1 20:59:22 GMT [scsi.cmd.pastTimeToLive:error]: Device 7.4: request failed after try #1: cdb 0x1b. Please answer yes or no. Continue with boot? yes Tue Aug 12 17:48:29 GMT [mgr.boot.new_OS:notice]: This system is running a new version of Data ONTAP (now NetApp Release 6.3) Tue Aug 12 17:48:29 GMT [mgr.boot.reason_ok:notice]: System rebooted. Tue Aug 12 17:48:29 GMT [monitor.shelf.fault:CRITICAL]: Fault reported on disk storage shelf attached to slot 7. Please check fans, power and temperature. Tue Aug 12 17:48:29 GMT [monitor.shelf.fault:CRITICAL]: Fault reported on disk storage shelf attached to slot 6. Please check fans, power and temperature. Tue Aug 12 17:48:30 GMT [console_login_mgr:info]: root logged in from console > *> df df not found. Type '?' for a list of commands *> quota report quota not found. Type '?' for a list of commands *> ? ? fcdiag help scsi disk_fw_update_fix fcstat led_off storage disk_list fctest led_on version disktest halt raid_config vol environment *> disk_list DISK CHAN VENDOR PRODUCT ID REV SERIAL# HW (BLOCKS BPS) ------------ ----- -------- ---------------- ---- ---------------- -- -------------- 7.8 FC:B NETAPP X221_ST318304FC NA06 3EL05WFK00002116KW7H ff 35964301 512 7.10 FC:B NETAPP X221_ST318304FC NA06 3EL08DTC00002119MFC0 ff 35964301 512 7.11 FC:B NETAPP X221_ST318304FC NA06 3EL02HT800007105EAYE ff 35964301 512 7.12 FC:B NETAPP X221_ST318304FC NA06 3EL05VNK00002117L60Y ff 35964301 512 7.13 FC:B SEAGATE ST318203FC NA10 LR55352300001018JE7L ff 35566480 512 7.14 FC:B NETAPP X221_ST318304FC NA40 3EL02L5N00007113N788 ff 35964301 512 7.1 FC:B NETAPP X221_ST318304FC NA06 3EL05T62000021178FN7 ff 35964301 512 7.2 FC:B NETAPP X221_ST318304FC NA06 3EL05XZ000002116JJ8S ff 35964301 512 7.3 FC:B SEAGATE ST318203FC NA11 LRF6862400007109WDKR ff 35566480 512 7.4 FC:B SEAGATE ST318203FC NA10 LRF6630000007028177N ff 35566480 512 7.5 FC:B NETAPP X221_ST318304FC NA06 3EL08Q4F00007126M7CV ff 35964301 512 7.6 FC:B NETAPP X221_ST318304FC NA41 3EL016L900007124NXGP ff 35964301 512 6.0 FC:A NETAPP X225_ST336704FC NA06 3CD0LC4D00007111PHC8 ff 71687369 512 6.1 FC:A NETAPP X225_ST336704FC NA06 3CD0LDRC00007112M14V ff 71687369 512 6.2 FC:A SEAGATE ST136403FC NA13 LT46325700007105AEZ2 ff 71132960 512 6.3 FC:A NETAPP X225_ST336704FC NA06 3CD0LSMQ00002112KV22 ff 71687369 512 ?.? ? ? ? FC:A : ERROR 6.5 FC:A SEAGATE ST136403FC NA13 LT51802500007110XKH5 ff 71132960 512 6.6 FC:A SEAGATE ST136403FC NA11 LT342386000070446ZEC ff 71132960 512 6.10 FC:A NETAPP X225_ST336704FC NA06 3CD0LQNA00007112HVBM ff 71687369 512 6.11 FC:A NETAPP X225_ST336704FC NA06 3CD0JSYF000021122NPX ff 71687369 512 6.12 FC:A NETAPP X225_ST336704FC NA06 3CD0LRC800002112KWTQ ff 71687369 512 6.13 FC:A NETAPP X225_ST336704FC NA06 3CD0LQXH00007112P6R8 ff 71687369 512 6.14 FC:A NETAPP X225_ST336704FC NA42 3CD16NT700002136BH5S ff 71687369 512 6.4 FC:A NETAPP X225_ST336704FC NA06 ? ? ? ff 0 0 *> ? ? fcdiag help scsi disk_fw_update_fix fcstat led_off storage disk_list fctest led_on version disktest halt raid_config vol environment *> raid_config                                 vol The following commands are available; for more information type "vol help " destroy options read_fsid rewrite_fsid offline quota_off rename snaprestore_cancel online raidlabel restrict status *> raid_conig raid_conig not found. Type '?' for a list of commands *> raid_conig      fig maximum disks possible 168 maximum raid groups possible 200 maximum volumes possible 200 maximum stripes possible 256 average raid group size 14 No. of disks in system 0 No. of groups in system 0 No. of volumes in system 0 Maximum write disks active 168 Maximum write groups active 12 Maximum reconstructs 4 Maximum reconstruction size 16 RAID buffer reserve 8168 RAID adjust buffer reserve 0 average raid disk write queue length 50 average raid disk read queue length 50 average raid disk write transfer rate 50 average raid disk read transfer rate 100 *> status status not found. Type '?' for a list of commands *> status status not found. Type '?' for a list of commands *> ? ? fcdiag help scsi disk_fw_update_fix fcstat led_off storage disk_list fctest led_on version disktest halt raid_config vol environment *> disktest SEQUENTIAL_ALTERNATING using [1024kb I/O - timeout: 300s] disktest: using A loop only for FC disks. Disks selected: 6.0 6.1 6.2 6.3 6.68 6.5 6.6 6.8 6.10 6.11 6.12 6.13 6.14 6.4 This test will take about 5 minutes to complete. disktest performs reads and writes to the savecore area of the selected disk(s). Ensure savecore has been run prior to executing disktest to avoid losing a corefile. Do you wish to continue? yes Running disk test ... (^C to stop) 11 disks active / Tue Aug 12 17:55:22 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:23 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:23 GMT [scsi.cmd.checkCondition:error]: Device 6.14: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:23 GMT [scsi.cmd.checkCondition:error]: Device 6.13: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). 11 disks active - 11 disks active \ 11 disks active | Tue Aug 12 17:55:40 GMT [ispfc_init_1:warning]: Resetting Fibre Channel adapter 6. 11 disks active / 11 disks active - 11 disks active \ Tue Aug 12 17:55:53 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.12: request failed after try #1: cdb 0x1c. Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.13: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.12: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.14: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.5: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.6: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.13: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.12: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.14: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.5: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.6: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.13: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.12: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:55 GMT [scsi.cmd.checkCondition:error]: Device 6.14: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:55:58 GMT [ispfc_main:error]: Loop recovery event caused by the device upstream from 6.10. 11 disks active | Tue Aug 12 17:55:59 GMT [ispfc_timeout:warning]: Resetting Fibre Channel adapter 6. Tue Aug 12 17:56:00 GMT [scsi.cmd.checkCondition:error]: Device 6.12: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:00 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:00 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:00 GMT [scsi.cmd.checkCondition:error]: Device 6.14: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:00 GMT [scsi.cmd.checkCondition:error]: Device 6.13: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:00 GMT [scsi.cmd.checkCondition:error]: Device 6.6: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). 11 disks active / Tue Aug 12 17:56:05 GMT [ispfc_timeout:error]: 9 loop-initialization events seen in 60 seconds on Fibre Channel adapter 6: indicates loop stability problem. 11 disks active - 11 disks active \ Tue Aug 12 17:56:14 GMT [scsi.cmd.checkCondition:error]: Device 6.12: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:14 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:14 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:14 GMT [scsi.cmd.checkCondition:error]: Device 6.13: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:14 GMT [scsi.cmd.checkCondition:error]: Device 6.14: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:14 GMT [scsi.cmd.checkCondition:error]: Device 6.5: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). 11 disks active | 11 disks active / Tue Aug 12 17:56:25 GMT [ispfc_main:error]: Disk 6.11: op 0x2a:04362800:0800 sector 70658048 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:56:25 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:25 GMT [scsi.cmd.noMorePaths:error]: Device 6.11: No more paths to device: cdb 0x2a:04362800:0800. All retries have failed. Tue Aug 12 17:56:26 GMT [ispfc_main:error]: Disk 6.10: op 0x2a:04362800:0800 sector 70658048 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:56:26 GMT [ispfc_main:error]: Disk 6.13: op 0x2a:04362800:0800 sector 70658048 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:56:26 GMT [ispfc_main:error]: Disk 6.14: op 0x2a:04362800:0800 sector 70658048 aborted command - Fibre Channel frame CRC error (b 47, 0) [6.11]: Opcode 0x2a [6.11]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.11]: check condition! [6.11]: Sense key: aborted command [6.11]: OpSense: f0 00 0b 04 36 28 00 0a 00 00 00 00 47 00 03 00 e0 00 08 00 00 e0 55 0a 00 00 00 00 00 0Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.noMorePaths:error]: Device 6.10: No more paths to device: cdb 0x2a:04362800:0800. All retries have failed. Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.13: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.noMorePaths:error]: Device 6.13: No more paths to device: cdb 0x2a:04362800:0800. All retries have failed. Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.14: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.noMorePaths:error]: Device 6.14: No more paths to device: cdb 0x2a:04362800:0800. All retries have failed. Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.12: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.6: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.5: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.14: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.13: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.12: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.6: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.5: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.13: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.14: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.6: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.12: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:26 GMT [scsi.cmd.checkCondition:error]: Device 6.5: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:31 GMT [ispfc_main:error]: Disk 6.12: op 0x2a:04362800:0800 sector 70658048 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:56:31 GMT [ispfc_main:error]: Disk 6.14: op 0x2a:04362000:0800 sector 70656000 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:56:31 GMT [ispfc_main:error]: Disk 6.11: op 0x2a:04362000:0800 sector 70656000 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:56:31 GMT [ispfc_main:error]: Disk 6.6: op 0x2a:04362800:0800 sector 70658048 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:56:32 GMT [ispfc_main:error]: Disk 6.10: op 0x2a:04362000:0800 sector 70656000 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:56:32 GMT [ispfc_main:error]: Disk 6.12: op 0x2a:04363000:0800 sector 70660096 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:56:32 GMT [ispfc_main:error]: Disk 6.13: op 0x2a:04362000:0800 sector 70656000 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:56:31 GMT [scsi.cmd.checkCondition:error]: Device 6.12: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:31 GMT [scsi.cmd.noMorePaths:error]: Device 6.12: No more paths to device: cdb 0x2a:04362800:0800. All retries have failed. Tue Aug 12 17:56:31 GMT [scsi.cmd.checkCondition:error]: Device 6.14: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:31 GMT [scsi.cmd.noMorePaths:error]: Device 6.14: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 17:56:31 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:31 GMT [scsi.cmd.noMorePaths:error]: Device 6.11: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 17:56:31 GMT [scsi.cmd.checkCondition:error]: Device 6.6: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:31 GMT [scsi.cmd.noMorePaths:error]: Device 6.6: No more paths to device: cdb 0x2a:04362800:0800. All retries have failed. Tue Aug 12 17:56:32 GMT [scsi.cmd.checkCondition:error]: Device 6.5: Check Condition: CDB 0x2a:04362800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:32 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:32 GMT [scsi.cmd.noMorePaths:error]: Device 6.10: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 17:56:32 GMT [scsi.cmd.checkCondition:error]: Device 6.12: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:32 GMT [scsi.cmd.noMorePaths:error]: Device 6.12: No more paths to device: cdb 0x2a:04363000:0800. All retries have failed. Tue Aug 12 17:56:32 GMT [scsi.cmd.checkCondition:error]: Device 6.13: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:32 GMT [scsi.cmd.noMorePaths:error]: Device 6.13: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 17:56:32 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:32 GMT [scsi.cmd.checkCondition:error]: Device 6.14: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:32 GMT [scsi.cmd.checkCondition:error]: Device 6.6: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:32 GMT [scsi.cmd.checkCondition:error]: Device 6.5: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:32 GMT [scsi.cmd.checkCondition:error]: Device 6.13: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:32 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:32 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04363800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:32 GMT [scsi.cmd.checkCondition:error]: Device 6.12: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). 0 08 00 00 00 [6.10]: Opcode 0x2a [6.10]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.10]: check condition! [6.10]: Sense key: aborted command [6.10]: OpSense: f0 00 0b 04 36 28 00 0a 00 00 00 00 47 00 03 00 e0 00 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.13]: Opcode 0x2a [6.13]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.13]: check condition! [6.13]: Sense key: aborted command [6.13]: OpSense: f0 00 0b 04 36 28 00 0a 00 00 00 00 47 00 03 00 e0 00 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.14]: Opcode 0x2a [6.14]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.14]: check condition! [6.14]: Sense key: aborted command [6.14]: OpSense: f0 00 0b 04 36 28 00 0a 00 00 00 00 47 00 03 00 00 e0 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.12]: Opcode 0x2a [6.12]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.12]: check condition! [6.12]: Sense key: aborted command [6.12]: OpSense: f0 00 0b 04 36 28 00 0a 00 00 00 00 47 00 03 00 e0 00 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.14]: Opcode 0x2a [6.14]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.14]: check condition! [6.14]: Sense key: aborted command [6.14]: OpSense: f0 00 0b 04 36 20 00 0a 00 00 00 00 47 00 03 00 00 60 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.11]: Opcode 0x2a [6.11]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.11]: check condition! [6.11]: Sense key: aborted command [6.11]: OpSense: f0 00 0b 04 36 20 00 0a 00 00 00 00 47 00 03 00 e0 00 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.6]: Opcode 0x2a [6.6]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.6]: check condition! [6.6]: Sense key: aborted command [6.6]: OpSense: f0 00 0b 04 36 28 00 0a 00 00 00 00 47 00 03 00 00 e0 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.10]: Opcode 0x2a [6.10]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.10]: check condition! [6.10]: Sense key: aborted command [6.10]: OpSense: f0 00 0b 04 36 20 00 0a 00 00 00 00 47 00 03 00 c0 40 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.12]: Opcode 0x2a [6.12]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.12]: check condition! [6.12]: Sense key: aborted command [6.12]: OpSense: f0 00 0b 04 36 30 00 0a 00 00 00 00 47 00 03 00 60 00 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.13]: Opcode 0x2a [6.13]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.13]: check condition! [6.13]: Sense key: aborted command [6.13]: OpSense: f0 00 0b 04 36 20 00 0a 00 00 00 00 47 00 03 00 e0 00 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 11 disks active - 11 disks active \ 11 disks active | Tue Aug 12 17:56:48 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04363800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:49 GMT [scsi.cmd.checkCondition:error]: Device 6.12: Check Condition: CDB 0x2a:04363800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:49 GMT [scsi.cmd.checkCondition:error]: Device 6.13: Check Condition: CDB 0x2a:04363800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:49 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04363800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:49 GMT [scsi.cmd.checkCondition:error]: Device 6.6: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:56:49 GMT [scsi.cmd.checkCondition:error]: Device 6.14: Check Condition: CDB 0x2a:04363800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). 11 disks active / 11 disks active - Tue Aug 12 17:57:00 GMT [ispfc_main:error]: Disk 6.12: op 0x2a:04362000:0800 sector 70656000 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:57:00 GMT [scsi.cmd.checkCondition:error]: Device 6.12: Check Condition: CDB 0x2a:04362000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:57:00 GMT [scsi.cmd.noMorePaths:error]: Device 6.12: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 17:57:00 GMT [ispfc_main:error]: Disk 6.10: op 0x2a:04363000:0800 sector 70660096 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:57:00 GMT [ispfc_main:error]: Disk 6.14: op 0x2a:04363000:0800 sector 70660096 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:57:00 GMT [ispfc_main:error]: Disk 6.13: op 0x2a:04363000:0800 sector 70660096 aborted command - Fibre Channel frame CRC error (b 47, 0) [6.12]: Opcode 0x2a [6.12]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.12]: check condition! [6.12]: Sense key: aborted command [6.12]: OpSense: f0 00 0b 04 36 20 00 0a 00 00 00 00 47 00 03 00 40 00 08 00 00 e0 55 0a 00 00 00 00 00 0Tue Aug 12 17:57:00 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:57:00 GMT [scsi.cmd.noMorePaths:error]: Device 6.10: No more paths to device: cdb 0x2a:04363000:0800. All retries have failed. Tue Aug 12 17:57:00 GMT [scsi.cmd.checkCondition:error]: Device 6.14: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:57:00 GMT [scsi.cmd.noMorePaths:error]: Device 6.14: No more paths to device: cdb 0x2a:04363000:0800. All retries have failed. Tue Aug 12 17:57:00 GMT [scsi.cmd.checkCondition:error]: Device 6.13: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:57:00 GMT [scsi.cmd.noMorePaths:error]: Device 6.13: No more paths to device: cdb 0x2a:04363000:0800. All retries have failed. Tue Aug 12 17:57:00 GMT [scsi.cmd.checkCondition:error]: Device 6.10: Check Condition: CDB 0x2a:04363800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). 0 08 00 00 00 [6.10]: Opcode 0x2a [6.10]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.10]: check condition! [6.10]: Sense key: aborted command [6.10]: OpSense: f0 00 0b 04 36 30 00 0a 00 00 00 00 47 00 03 00 e0 00 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.14]: Opcode 0x2a [6.14]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.14]: check condition! [6.14]: Sense key: aborted command [6.14]: OpSense: f0 00 0b 04 36 30 00 0a 00 00 00 00 47 00 03 00 00 40 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.13]: Opcode 0x2a [6.13]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.13]: check condition! [6.13]: Sense key: aborted command [6.13]: OpSense: f0 00 0b 04 36 30 00 0a 00 00 00 00 47 00 03 00 40 00 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 11 disks active \ 11 disks active | Tue Aug 12 17:57:08 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). 11 disks active / Tue Aug 12 17:57:17 GMT [ispfc_timeout:error]: 10 loop-initialization events seen in 60 seconds on Fibre Channel adapter 6: indicates loop stability problem. 11 disks active - 11 disks active \ 11 disks active | 11 disks active / 11 disks active - 11 disks active \ Tue Aug 12 17:57:45 GMT [ispfc_main:error]: Disk 6.11: op 0x2a:04363000:0800 sector 70660096 aborted command - Fibre Channel frame CRC error (b 47, 0) Tue Aug 12 17:57:45 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04363000:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 17:57:45 GMT [scsi.cmd.noMorePaths:error]: Device 6.11: No more paths to device: cdb 0x2a:04363000:0800. All retries have failed. [6.11]: Opcode 0x2a [6.11]: OpStatus 0x2 HostStatus 0x0 TargetStatus 0x8000 [6.11]: check condition! [6.11]: Sense key: aborted command [6.11]: OpSense: f0 00 0b 04 36 30 00 0a 00 00 00 00 47 00 03 00 40 00 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 11 disks active | 11 disks active / 11 disks active - 11 disks active \ 11 disks active | 11 disks active / 11 disks active - Tue Aug 12 17:58:18 GMT [ispfc_timeout:error]: 8 loop-initialization events seen in 60 seconds on Fibre Channel adapter 6: indicates loop stability problem. 11 disks active \ 11 disks active | 11 disks active / Tue Aug 12 17:58:36 GMT [ispfc_main:error]: Loop recovery event caused by the device upstream from 6.10. Tue Aug 12 17:58:37 GMT [ispfc_timeout:warning]: Resetting Fibre Channel adapter 6. 11 disks active - 11 disks active \ 11 disks active | Tue Aug 12 17:58:52 GMT [ispfc_main:error]: Loop recovery event caused by the device upstream from 6.10. 11 disks active / Tue Aug 12 17:58:53 GMT [ispfc_timeout:warning]: Resetting Fibre Channel adapter 6. Tue Aug 12 17:58:53 GMT [scsi.cmd.checkCondition:error]: Device 6.11: Check Condition: CDB 0x2a:04363800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). 11 disks active - 11 disks active \ 11 disks active | 11 disks active / 11 disks active - 11 disks active \ 11 disks active | 11 disks active / 11 disks active - 11 disks active \ 11 disks active | 11 disks active / 11 disks active - 11 disks active \ 11 disks active | 11 disks active / 11 disks active - 11 disks active \ 11 disks active | Time limit reached - stopping I/O Tue Aug 12 18:01:01 GMT [scsi.cmd.checkCondition:error]: Device 6.6: Check Condition: CDB 0x2a:04363800:0800: Sense Data aborted command - Fibre Channel frame CRC error (0xb - 0x47 0x0 0x3). Tue Aug 12 18:01:12 GMT [ispfc_timeout:warning]: 6.3 (0x02000003) (0xfffffc0002377638,0x1c,0/0,49760/49110/0,35957/0): command timeout, quiescing drive to allow outstanding I/O to complete. Tue Aug 12 18:01:18 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.3: request failed after try #1: cdb 0x1c. Tue Aug 12 18:01:59 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.12: request failed after try #1: cdb 0x1c. Tue Aug 12 18:02:07 GMT [ispfc_main:error]: Loop recovery event caused by the device upstream from 6.10. Tue Aug 12 18:02:08 GMT [ispfc_timeout:warning]: Resetting Fibre Channel adapter 6. Tue Aug 12 18:02:19 GMT [ispfc_timeout:error]: Device 6.5 (0x02000005) appears to have taken a soft address: expected hard address 126 (0x0), assigned soft address 5 (0xe0). ispfc: Loop initialization on Fibre Channel adapter 6 failed. Either the loop is open or a drive is misbehaving and not completing LIP. Will try a LIP RESET to unwedge errant drive, and then backoff 1002 mSecs before retrying. ispfc: Loop initialization on Fibre Channel adapter 6 failed. Either the loop is open or a drive is misbehaving and not completing LIP. Will try a LIP RESET to unwedge errant drive, and then backoff 2004 mSecs before retrying. Tue Aug 12 18:02:32 GMT [ispfc_timeout:warning]: Resetting Fibre Channel adapter 6. ispfc: Loop initialization on Fibre Channel adapter 6 failed. Either the loop is open or a drive is misbehaving and not completing LIP. Will try a LIP RESET to unwedge errant drive, and then backoff 1106 mSecs before retrying. ispfc: Loop initialization on Fibre Channel adapter 6 failed. Either the loop is open or a drive is misbehaving and not completing LIP. Will try a LIP RESET to unwedge errant drive, and then backoff 2212 mSecs before retrying. Tue Aug 12 18:02:43 GMT [ispfc_timeout:error]: Could not recover loop on Fibre Channel adapter 6 after 30 seconds. Tue Aug 12 18:02:44 GMT [ispfc_timeout:error]: Offlining Fibre Channel adapter 6. Tue Aug 12 18:02:44 GMT [ispfc_init_1:notice]: Fibre Channel adapter 6 is now offline. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.10: Adapter/target error: HA status 0x7: cdb 0x2a:04363800:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.10: No more paths to device: cdb 0x2a:04363800:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.10: Adapter/target error: HA status 0x7: cdb 0x28:04364000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.10: No more paths to device: cdb 0x28:04364000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.10: Adapter/target error: HA status 0x7: cdb 0x2a:04362000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.10: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.11: Adapter/target error: HA status 0x7: cdb 0x2a:04363800:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.11: No more paths to device: cdb 0x2a:04363800:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.11: Adapter/target error: HA status 0x7: cdb 0x28:04364000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.11: No more paths to device: cdb 0x28:04364000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.11: Adapter/target error: HA status 0x7: cdb 0x2a:04362000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.11: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.12: Adapter/target error: HA status 0x7: cdb 0x2a:04363800:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.12: No more paths to device: cdb 0x2a:04363800:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.12: Adapter/target error: HA status 0x7: cdb 0x28:04364000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.12: No more paths to device: cdb 0x28:04364000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.12: Adapter/target error: HA status 0x7: cdb 0x2a:04362000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.12: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.13: Adapter/target error: HA status 0x7: cdb 0x2a:04363800:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.13: No more paths to device: cdb 0x2a:04363800:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.13: Adapter/target error: HA status 0x7: cdb 0x28:04364000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.13: No more paths to device: cdb 0x28:04364000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.13: Adapter/target error: HA status 0x7: cdb 0x2a:04362000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.13: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.14: Adapter/target error: HA status 0x7: cdb 0x2a:04362000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.14: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.14: Adapter/target error: HA status 0x7: cdb 0x2a:04363800:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.14: No more paths to device: cdb 0x2a:04363800:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.14: Adapter/target error: HA status 0x7: cdb 0x28:04364000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.14: No more paths to device: cdb 0x28:04364000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.0: Adapter/target error: HA status 0x7: cdb 0x2a:04363800:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.0: No more paths to device: cdb 0x2a:04363800:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.0: Adapter/target error: HA status 0x7: cdb 0x28:04364000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.0: No more paths to device: cdb 0x28:04364000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.0: Adapter/target error: HA status 0x7: cdb 0x2a:04362000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.0: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.1: Adapter/target error: HA status 0x7: cdb 0x2a:04363800:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.1: No more paths to device: cdb 0x2a:04363800:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.1: Adapter/target error: HA status 0x7: cdb 0x28:04364000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.1: No more paths to device: cdb 0x28:04364000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.1: Adapter/target error: HA status 0x7: cdb 0x2a:04362000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.1: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.2: Adapter/target error: HA status 0x7: cdb 0x28:04364000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.2: No more paths to device: cdb 0x28:04364000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.2: Adapter/target error: HA status 0x7: cdb 0x2a:04362000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.2: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.2: Adapter/target error: HA status 0x7: cdb 0x2a:04363800:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.2: No more paths to device: cdb 0x2a:04363800:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.3: Adapter/target error: HA status 0x7: cdb 0x28:04364000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.3: No more paths to device: cdb 0x28:04364000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.3: request failed after try #1: cdb 0x1c. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.3: Adapter/target error: HA status 0x7: cdb 0x2a:04362000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.3: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.3: Adapter/target error: HA status 0x7: cdb 0x2a:04363800:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.3: No more paths to device: cdb 0x2a:04363800:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.5: Adapter/target error: HA status 0x7: cdb 0x2a:04362000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.5: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.5: Adapter/target error: HA status 0x7: cdb 0x2a:04362800:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.5: No more paths to device: cdb 0x2a:04362800:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.5: Adapter/target error: HA status 0x7: cdb 0x2a:04363000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.5: No more paths to device: cdb 0x2a:04363000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.6: Adapter/target error: HA status 0x7: cdb 0x2a:04362000:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:44 GMT [scsi.cmd.noMorePaths:error]: Device 6.6: No more paths to device: cdb 0x2a:04362000:0800. All retries have failed. Tue Aug 12 18:02:44 GMT [scsi.cmd.selectionTimeout:error]: Device 6.6: Adapter/target error: HA status 0x7: cdb 0x2a:04363800:0800. Targeted device did not respond to requested I/O. I/O will be retried. Tue Aug 12 18:02:55 GMT [ses_admin:error]: No more valid paths to Enclosure Services in shelf 0 on channel 6. [6.0]: Opcode 0x2a [6.0]: OpStatus 0x1 HostStatus 0x3 TargetStatus 0x0 [6.0]: OpSense: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [6.10]: Opcode 0x2a [6.10]: OpStatus 0x1 HostStatus 0x3 TargeTue Aug 12 18:02:56 GMT [monitor.shelf.configError:CRITICAL]: Configuration error on disk storage shelf attached to slot 6. Please check drive placement. Tue Aug 12 18:02:56 GMT [raid.disk.removed:error]: Disk 6.10 (S/N 3CD0LQNA00007112HVBM) has been removed from the system Tue Aug 12 18:02:56 GMT [raid.disk.removed:error]: Disk 6.11 (S/N 3CD0JSYF000021122NPX) has been removed from the system Tue Aug 12 18:02:56 GMT [raid.disk.removed:error]: Disk 6.12 (S/N 3CD0LRC800002112KWTQ) has been removed from the system Tue Aug 12 18:02:56 GMT [raid.disk.removed:error]: Disk 6.13 (S/N 3CD0LQXH00007112P6R8) has been removed from the system Tue Aug 12 18:02:56 GMT [raid.disk.removed:error]: Disk 6.14 (S/N 3CD16NT700002136BH5S) has been removed from the system Tue Aug 12 18:02:56 GMT [raid.disk.removed:error]: Disk 6.0 (S/N 3CD0LC4D00007111PHC8) has been removed from the system Tue Aug 12 18:02:56 GMT [raid.disk.removed:error]: Disk 6.1 (S/N 3CD0LDRC00007112M14V) has been removed from the system Tue Aug 12 18:02:56 GMT [raid.disk.removed:error]: Disk 6.2 (S/N LT46325700007105AEZ2) has been removed from the system Tue Aug 12 18:02:56 GMT [raid.disk.removed:error]: Disk 6.3 (S/N 3CD0LSMQ00002112KV22) has been removed from the system Tue Aug 12 18:02:56 GMT [raid.disk.removed:error]: Disk 6.5 (S/N LT51802500007110XKH5) has been removed from the system Tue Aug 12 18:02:56 GMT [raid.disk.removed:error]: Disk 6.6 (S/N LT342386000070446ZEC) has been removed from the system tStatus 0x8000 [6.10]: OpSense: f0 00 0b 04 36 28 00 0a 00 00 00 00 47 00 03 00 e0 00 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.11]: Opcode 0x2a [6.11]: OpStatus 0x1 HostStatus 0x3 TargetStatus 0x8000 [6.11]: OpSense: f0 00 0b 04 36 28 00 0a 00 00 00 00 47 00 03 00 e0 00 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.12]: Opcode 0x2a [6.12]: OpStatus 0x1 HostStatus 0x3 TargetStatus 0x8000 [6.12]: OpSense: f0 00 0b 04 36 28 00 0a 00 00 00 00 47 00 03 00 e0 00 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.13]: Opcode 0x2a [6.13]: OpStatus 0x1 HostStatus 0x3 TargetStatus 0x8000 [6.13]: OpSense: f0 00 0b 04 36 28 00 0a 00 00 00 00 47 00 03 00 e0 00 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.14]: Opcode 0x2a [6.14]: OpStatus 0x1 HostStatus 0x3 TargetStatus 0x8000 [6.14]: OpSense: f0 00 0b 04 36 30 00 0a 00 00 00 00 47 00 03 00 00 40 08 00 00 e0 55 0a 00 00 00 00 00 00 08 00 00 00 [6.1]: Opcode 0x2a [6.1]: OpStatus 0x1 HostStatus 0x3 TargetStatus 0x0 [6.1]: OpSense: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [6.2]: Opcode 0x28 [6.2]: OpStatus 0x1 HostStatus 0x3 TargetStatus 0x0 [6.2]: OpSense: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [6.3]: Opcode 0x28 [6.3]: OpStatus 0x1 HostStatus 0x3 TargetStatus 0x0 [6.3]: OpSense: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [6.5]: Opcode 0x2a [6.5]: OpStatus 0x1 HostStatus 0x3 TargetStatus 0x0 [6.5]: OpSense: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [6.6]: Opcode 0x2a [6.6]: OpStatus 0x1 HostStatus 0x3 TargetStatus 0x0 [6.6]: OpSense: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Tue Aug 12 18:03:02 GMT [ispfc_init_1:notice]: Fibre Channel adapter 6 now online. -------------------------------[Cumulative RCA Errors]---------------------------- Loop Link Underrun Loss of Invalid Frame In Frame Out Confidence ID Failure count sync CRC count count Factor count count count 6.0 0 0 46 0 18446744073709551557 18446744073709551557 6.1 0 0 5 0 18446744073709551555 18446744073709551555 6.2 0 0 13 0 18446744073709551556 18446744073709551556 6.3 0 -156 16 0 18446744073709501589 18446744073709501589 6.4 0 0 6 0 18446744073709551551 18446744073709551551 6.5 0 0 3000 108 2 2 6.6 0 0 21 119 2 2 6.10 7 0 193 221 18446744073709551558 18446744073709551558 6.11 0 0 7 171 18446744073709551551 18446744073709551551 6.12 0 0 5 123 18446744073709501697 18446744073709501697 6.13 0 0 7 157 18446744073709551557 18446744073709551557 6.14 0 0 Tue Aug 12 18:03:04 GMT [scsi.cmd.transportError:error]: Device 6.0: Transport error during execution of command: HA status 0x9: cdb 0x25. 8 149 18446744073709551555 18446744073709551555 ================================================================================ 6 7 0 3327 954 106107 465019 0.00 [actual: 4288 / BER allowed: 0] Adapter Write Read IOPS Data Data Device Confidence ID count count Rate xfer errors Factor MB/S size soft/hard 6 31 31 0 0.0 1024k 0/ 0 1.00 *> *> *> *> *> *> *> zTue Aug 12 18:03:15 GMT [scsi.cmd.retrySuccess:info]: Device 6.0: request successful after retry #1: cdb 0x25. Tue Aug 12 18:03:29 GMT [ispfc_timeout:error]: 15 loop-initialization events seen in 60 seconds on Fibre Channel adapter 6: indicates loop stability problem. Tue Aug 12 18:03:52 GMT [ispfc_init_1:warning]: Resetting Fibre Channel adapter 6. Tue Aug 12 18:03:59 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.5: request failed after try #1: cdb 0x1a. Tue Aug 12 18:03:59 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.6: request failed after try #1: cdb 0x1a. Tue Aug 12 18:03:59 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.11: request failed after try #1: cdb 0x1a. Tue Aug 12 18:03:59 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.12: request failed after try #1: cdb 0x1c. Tue Aug 12 18:03:59 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.14: request failed after try #1: cdb 0x1a. Tue Aug 12 18:04:31 GMT [ispfc_timeout:error]: 8 loop-initialization events seen in 60 seconds on Fibre Channel adapter 6: indicates loop stability problem. Tue Aug 12 18:04:34 GMT [ispfc_timeout:warning]: 6.0 (0x02000000) (0xfffffc0002377638,0x15,0/0,8/0/0,36584/0): command timeout, quiescing drive to allow outstanding I/O to complete. Tue Aug 12 18:04:34 GMT [ispfc_timeout:warning]: 6.1 (0x02000001) (0xfffffc0002378d98,0x15,0/0,8/0/0,36584/0): command timeout, quiescing drive to allow outstanding I/O to complete. Tue Aug 12 18:04:34 GMT [ispfc_timeout:warning]: 6.3 (0x02000003) (0xfffffc0002378298,0x15,0/0,10/0/0,36584/0): command timeout, quiescing drive to allow outstanding I/O to complete. Tue Aug 12 18:04:34 GMT [ispfc_timeout:warning]: 6.5 (0x02000005) (0xfffffc0002378ef8,0x15,0/0,8/0/0,36584/0): command timeout, quiescing drive to allow outstanding I/O to complete. Tue Aug 12 18:04:35 GMT [ispfc_timeout:warning]: 6.6 (0x02000006) (0xfffffc0002378c38,0x15,0/0,8/0/0,36584/0): command timeout, quiescing drive to allow outstanding I/O to complete. Tue Aug 12 18:04:35 GMT [ispfc_timeout:warning]: 6.10 (0x0200000a) (0xfffffc0002375ed8,0x15,0/0,8/0/0,36584/0): command timeout, quiescing drive to allow outstanding I/O to complete. Tue Aug 12 18:04:35 GMT [ispfc_timeout:warning]: 6.11 (0x0200000b) (0xfffffc0002378138,0x15,0/0,10/0/0,36584/0): command timeout, quiescing drive to allow outstanding I/O to complete. Tue Aug 12 18:04:35 GMT [ispfc_timeout:warning]: 6.12 (0x0200000c) (0xfffffc0002377bb8,0x15,0/0,9/0/0,36584/0): command timeout, quiescing drive to allow outstanding I/O to complete. Tue Aug 12 18:04:35 GMT [ispfc_timeout:warning]: 6.13 (0x0200000d) (0xfffffc0002376f58,0x15,0/0,8/0/0,36584/0): command timeout, quiescing drive to allow outstanding I/O to complete. Tue Aug 12 18:04:35 GMT [ispfc_timeout:warning]: 6.14 (0x0200000e) (0xfffffc0002378558,0x15,0/0,8/0/0,36584/0): command timeout, quiescing drive to allow outstanding I/O to complete. Tue Aug 12 18:04:39 GMT [ispfc_timeout:error]: 6.0 (0x02000000): global device timer timeout, initiating device recovery. Tue Aug 12 18:04:39 GMT [ispfc_timeout:error]: 6.1 (0x02000001): global device timer timeout, initiating device recovery. Tue Aug 12 18:04:39 GMT [ispfc_timeout:error]: 6.3 (0x02000003): global device timer timeout, initiating device recovery. Tue Aug 12 18:04:39 GMT [ispfc_timeout:error]: 6.5 (0x02000005): global device timer timeout, initiating device recovery. Tue Aug 12 18:04:39 GMT [ispfc_timeout:error]: 6.6 (0x02000006): global device timer timeout, initiating device recovery. Tue Aug 12 18:04:39 GMT [ispfc_timeout:error]: 6.10 (0x0200000a): global device timer timeout, initiating device recovery. Tue Aug 12 18:04:39 GMT [ispfc_timeout:error]: 6.11 (0x0200000b): global device timer timeout, initiating device recovery. Tue Aug 12 18:04:40 GMT [ispfc_timeout:error]: 6.12 (0x0200000c): global device timer timeout, initiating device recovery. Tue Aug 12 18:04:40 GMT [ispfc_timeout:error]: 6.13 (0x0200000d): global device timer timeout, initiating device recovery. Tue Aug 12 18:04:40 GMT [ispfc_timeout:error]: 6.14 (0x0200000e): global device timer timeout, initiating device recovery. Tue Aug 12 18:04:58 GMT [ispfc_init_1:warning]: Resetting Fibre Channel adapter 6. Tue Aug 12 18:05:05 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.4: request failed after try #1: cdb 0x1b. Tue Aug 12 18:05:05 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.4: request failed after try #3: cdb 0x1c. Tue Aug 12 18:05:35 GMT [ispfc_timeout:error]: 13 loop-initialization events seen in 60 seconds on Fibre Channel adapter 6: indicates loop stability problem. Tue Aug 12 18:05:40 GMT [ispfc_init_1:warning]: Resetting Fibre Channel adapter 6. Tue Aug 12 18:05:53 GMT [ses_admin:error]: XL500 shelf 1 on channel 7 reports a critical condition Power Supply Element 2: critical status power supply failed Tue Aug 12 18:05:54 GMT [ses_admin:error]: XL500 shelf 0 on channel 7 reports a critical condition Power Supply Element 2: critical status power supply failed Tue Aug 12 18:06:01 GMT [ses_admin:error]: XL500 shelf 1 on channel 6 reports a critical condition Power Supply Element 2: critical status power supply failed Tue Aug 12 18:06:02 GMT [ses_admin:error]: XL500 shelf 0 on channel 6 reports a critical condition Power Supply Element 2: critical status power supply failed Tue Aug 12 18:06:21 GMT [scsi.cmd.transportError:error]: Device 6.3: Transport error during execution of command: HA status 0x9: cdb 0x1c. Tue Aug 12 18:06:36 GMT [ispfc_timeout:error]: 15 loop-initialization events seen in 60 seconds on Fibre Channel adapter 6: indicates loop stability problem. Tue Aug 12 18:06:37 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.4: request failed after try #1: cdb 0x1b. Tue Aug 12 18:06:58 GMT [ispfc_init_1:warning]: Resetting Fibre Channel adapter 6. Tue Aug 12 18:07:37 GMT [ispfc_timeout:error]: 14 loop-initialization events seen in 60 seconds on Fibre Channel adapter 6: indicates loop stability problem. Tue Aug 12 18:08:07 GMT [ispfc_init_1:error]: Device 6.5 (0x02000005) appears to have taken a soft address: expected hard address 126 (0x0), assigned soft address 5 (0xe0). Tue Aug 12 18:08:12 GMT [ispfc_init_1:error]: Failed to build FCAL map on Fibre Channel adapter 6 -- resetting adapter. Tue Aug 12 18:08:12 GMT [ispfc_init_1:warning]: Resetting Fibre Channel adapter 6. ispfc: Loop initialization on Fibre Channel adapter 6 failed. Either the loop is open or a drive is misbehaving and not completing LIP. Will try a LIP RESET to unwedge errant drive, and then backoff 807 mSecs before retrying. ispfc: Loop initialization on Fibre Channel adapter 6 failed. Either the loop is open or a drive is misbehaving and not completing LIP. Will try a LIP RESET to unwedge errant drive, and then backoff 1614 mSecs before retrying. Tue Aug 12 18:08:23 GMT [ispfc_timeout:warning]: Resetting Fibre Channel adapter 6. Tue Aug 12 18:08:32 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.4: request failed after try #1: cdb 0x1b. Tue Aug 12 18:08:42 GMT [ispfc_init_1:warning]: Resetting Fibre Channel adapter 6. Tue Aug 12 18:08:46 GMT [ispfc_timeout:error]: 11 loop-initialization events seen in 60 seconds on Fibre Channel adapter 6: indicates loop stability problem. Tue Aug 12 18:09:00 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.11: request failed after try #1: cdb 0x1c. Tue Aug 12 18:09:48 GMT [ispfc_timeout:error]: 15 loop-initialization events seen in 60 seconds on Fibre Channel adapter 6: indicates loop stability problem. Tue Aug 12 18:09:56 GMT [ispfc_init_1:error]: Device 6.5 (0x02000005) appears to have taken a soft address: expected hard address 126 (0x0), assigned soft address 5 (0xe0). Tue Aug 12 18:09:58 GMT [ispfc_timeout:error]: Could not recover loop on Fibre Channel adapter 6 after 30 seconds. Tue Aug 12 18:09:58 GMT [ispfc_timeout:error]: Offlining Fibre Channel adapter 6. Tue Aug 12 18:10:07 GMT [ispfc_init_1:error]: Failed to build FCAL map on Fibre Channel adapter 6 -- resetting adapter. Tue Aug 12 18:10:08 GMT [ispfc_init_1:warning]: Resetting Fibre Channel adapter 6. Tue Aug 12 18:10:10 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.4: request failed after try #1: cdb 0x1b. Tue Aug 12 18:10:10 GMT [ispfc_init_1:notice]: Fibre Channel adapter 6 is now offline. Tue Aug 12 18:10:10 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.11: request failed after try #1: cdb 0x1c. Tue Aug 12 18:10:10 GMT [ses_admin:error]: No more valid paths to Enclosure Services in shelf 0 on channel 6. Tue Aug 12 18:10:11 GMT [raid.disk.inserted:error]: Disk ?.? (S/N UNKNOWN) has been inserted into the system Tue Aug 12 18:10:11 GMT [raid.disk.inserted:error]: Disk ?.? (S/N UNKNOWN) has been inserted into the system Tue Aug 12 18:10:11 GMT [raid.disk.inserted:error]: Disk ?.? (S/N UNKNOWN) has been inserted into the system Tue Aug 12 18:10:11 GMT [raid.disk.inserted:error]: Disk ?.? (S/N UNKNOWN) has been inserted into the system Tue Aug 12 18:10:11 GMT [raid.disk.inserted:error]: Disk ?.? (S/N UNKNOWN) has been inserted into the system Tue Aug 12 18:10:11 GMT [raid.disk.inserted:error]: Disk ?.? (S/N UNKNOWN) has been inserted into the system Tue Aug 12 18:10:11 GMT [raid.disk.inserted:error]: Disk ?.? (S/N UNKNOWN) has been inserted into the system Tue Aug 12 18:10:11 GMT [raid.disk.inserted:error]: Disk ?.? (S/N UNKNOWN) has been inserted into the system Tue Aug 12 18:10:11 GMT [raid.disk.inserted:error]: Disk ?.? (S/N UNKNOWN) has been inserted into the system Tue Aug 12 18:10:12 GMT [raid.disk.inserted:error]: Disk ?.? (S/N UNKNOWN) has been inserted into the system Tue Aug 12 18:10:12 GMT [raid.disk.inserted:error]: Disk ?.? (S/N UNKNOWN) has been inserted into the system Tue Aug 12 18:10:12 GMT [raid.disk.inserted:error]: Disk ?.? (S/N UNKNOWN) has been inserted into the system Tue Aug 12 18:10:12 GMT [statd:warning]: Disk(s) have downrev firmware. Tue Aug 12 18:10:12 GMT [statd:warning]: *** Disk 7.8 has downrev firmware. Please update it. Tue Aug 12 18:10:12 GMT [statd:warning]: *** Disk 7.10 has downrev firmware. Please update it. Tue Aug 12 18:10:12 GMT [statd:warning]: *** Disk 7.11 has downrev firmware. Please update it. Tue Aug 12 18:10:12 GMT [statd:warning]: *** Disk 7.12 has downrev firmware. Please update it. Tue Aug 12 18:10:12 GMT [statd:warning]: *** Disk 7.13 has downrev firmware. Please update it. Tue Aug 12 18:10:12 GMT [statd:warning]: *** Disk 7.1 has downrev firmware. Please update it. Tue Aug 12 18:10:13 GMT [statd:warning]: *** Disk 7.2 has downrev firmware. Please update it. Tue Aug 12 18:10:13 GMT [statd:warning]: *** Disk 7.4 has downrev firmware. Please update it. Tue Aug 12 18:10:13 GMT [statd:warning]: *** Disk 7.5 has downrev firmware. Please update it. Tue Aug 12 18:10:13 GMT [statd:warning]: *** WARNING *** Remove or update those downrev disks!! Tue Aug 12 18:10:13 GMT [monitor.downRevDisks:warning]: Downrev disks still present!! Tue Aug 12 18:10:13 GMT [raid.assim.noDisks:warning]: RAID dynamic assimilation failed: no disks to assimilate Tue Aug 12 18:10:26 GMT [ses_admin:error]: XL500 shelf 1 on channel 7 reports a critical condition Power Supply Element 2: critical status power supply failed Tue Aug 12 18:10:27 GMT [ses_admin:error]: XL500 shelf 0 on channel 7 reports a critical condition Power Supply Element 2: critical status power supply failed z not found. Type '?' for a list of commands *> ? ? fcdiag help scsi disk_fw_update_fix fcstat led_off storage disk_list fctest led_on version disktest halt raid_config vol environment *> version NetApp Release 6.3: Wed Aug 7 23:04:57 PDT 2002 *> vol The following commands are available; for more information type "vol help " destroy options read_fsid rewrite_fsid offline quota_off rename snaprestore_cancel online raidlabel restrict status *> vol status Tue Aug 12 18:15:14 GMT [statd:warning]: Disk(s) have downrev firmware. Tue Aug 12 18:15:14 GMT [statd:warning]: *** Disk 7.8 has downrev firmware. Please update it. Tue Aug 12 18:15:14 GMT [statd:warning]: *** Disk 7.10 has downrev firmware. Please update it. Tue Aug 12 18:15:14 GMT [statd:warning]: *** Disk 7.11 has downrev firmware. Please update it. Tue Aug 12 18:15:14 GMT [statd:warning]: *** Disk 7.12 has downrev firmware. Please update it. Tue Aug 12 18:15:14 GMT [statd:warning]: *** Disk 7.13 has downrev firmware. Please update it. Tue Aug 12 18:15:15 GMT [statd:warning]: *** Disk 7.1 has downrev firmware. Please update it. Tue Aug 12 18:15:15 GMT [statd:warning]: *** Disk 7.2 has downrev firmware. Please update it. Tue Aug 12 18:15:15 GMT [statd:warning]: *** Disk 7.4 has downrev firmware. Please update it. Tue Aug 12 18:15:15 GMT [statd:warning]: *** Disk 7.5 has downrev firmware. Please update it. Tue Aug 12 18:15:15 GMT [statd:warning]: *** WARNING *** Remove or update those downrev disks!! Tue Aug 12 18:15:15 GMT [monitor.downRevDisks:warning]: Downrev disks still present!! the system appears to have no disks! unable to run vol command *> *> *> ? ? fcdiag help scsi disk_fw_update_fix fcstat led_off storage disk_list fctest led_on version disktest halt raid_config vol environment *> storage usage: storage subcommands are: disable adapter download switch firmware download switch config download shelf {channel | shelf} enable adapter help rename switch release disks release {mc | tape} set port show adapter [ -a ] [ ] show hub [ -a ] [ ] show disk [ -a | -p | ] show mc [ ] show port [ ] show switch [ ] show tape [ ] show tape supported [ -v ] stats tape stats tape zero upload switch {config | support} [ ] *> storage disk -a storage: unrecognized command "disk" usage: storage subcommands are: disable adapter download switch firmware download switch config download shelf {channel | shelf} enable adapter help rename switch release disks release {mc | tape} set port show adapter [ -a ] [ ] show hub [ -a ] [ ] show disk [ -a | -p | ] show mc [ ] show port [ ] show switch [ ] show tape [ ] show tape supported [ -v ] stats tape stats tape zero upload switch {config | support} [ ] *> storeage disk storeage not found. Type '?' for a list of commands *> storeage                age disk storage: unrecognized command "disk" usage: storage subcommands are: disable adapter download switch firmware download switch config download shelf {channel | shelf} enable adapter help rename switch release disks release {mc | tape} set port show adapter [ -a ] [ ] show hub [ -a ] [ ] show disk [ -a | -p | ] show mc [ ] show port [ ] show switch [ ] show tape [ ] show tape supported [ -v ] stats tape stats tape zero upload switch {config | support} [ ] *> ? ? fcdiag help scsi disk_fw_update_fix fcstat led_off storage disk_list fctest led_on version disktest halt raid_config vol environment *> exit exit not found. Type '?' for a list of commands *> quit quit not found. Type '?' for a list of commands *> logout Tue Aug 12 18:21:52 GMT [monitor.power.warning:warning]: Power supply 1 is powered off Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 512 MB Testing SIO Testing LCD Probing devices Testing 512MB 16MB chunks 1 to 16MB 16 to 32MB 32 to 48MB 48 to 64MB 64 to 80MB 80 to 96MB 96 to 112MB 112 to 128MB 128 to 144MB 144 to 160MB 160 to 176MB 176 to 192MB 192 to 208MB 208 to 224MB 224 to 240MB 240 to 256MB 256 to 272MB 272 to 288MB 288 to 304MB 304 to 320MB 320 to 336MB 336 to 352MB 352 to 368MB 368 to 384MB 384 to 400MB 400 to 416MB 416 to 432MB 432 to 448MB 448 to 464MB 464 to 480MB 480 to 496MB 496 to 512MB Complete Finding image...iLIP Loading 3 2 disk@2 iLIP iLIP Can't open boot device Startup failed Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 512 MB Testing SIO Testing LCD Probing devices Testing 512MB 16MB chunks 1 to 16MB 16 to 32MB 32 to 48MB 48 to 64MB 64 to 80MB 80 to 96MB 96 to 112MB 112 to 128MB 128 to 144MB 144 to 160MB 160 to 176MB 176 to 192MB 192 to 208MB 208 to 224MB 224 to 240MB 240 to 256MB 256 to 272MB 272 to 288MB 288 to 304MB 304 to 320MB 320 to 336MB 336 to 352MB 352 to 368MB 368 to 384MB 384 to 400MB 400 to 416MB 416 to 432MB 432 to 448MB 448 to 464MB 464 to 480MB 480 to 496MB 496 to 512MB Complete Finding image... Loading 3 2 disk@0 Can't open boot device Startup failed Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 512 MB Testing SIO Testing LCD Probing devices Testing 512MB 16MB chunks 1 to 16MB 16 to 32MB 32 to 48MB 48 to 64MB 64 to 80MB 80 to 96MB 96 to 112MB 112 to 128MB 128 to 144MB 144 to 160MB 160 to 176MB 176 to 192MB 192 to 208MB 208 to 224MB 224 to 240MB 240 to 256MB 256 to 272MB 272 to 288MB 288 to 304MB 304 to 320MB 320 to 336MB 336 to 352MB 352 to 368MB 368 to 384MB 384 to 400MB 400 to 416MB 416 to 432MB 432 to 448MB 448 to 464MB 464 to 480MB 480 to 496MB 496 to 512MB Complete Finding image... Loading 3 2 disk@0 Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 20% 21% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 26% 27% 27% 27% 28% 28% 28% 29% 29% 29% 30% 30% 30% 30% 31% 31% 31% 32% 32% 32% 33% 33% 33% 34% 34% 34% 35% 35% 35% 36% 36% 36% 37% 37% 37% 38% 38% 38% 39% 39% 39% 40% 40% 40% 40% 41% 41% 41% 42% 42% 42% 43% 43% 43% 44% 44% 44% 45% 45% 45% 46% 46% 46% 47% 47% 47% 48% 48% 48% 49% 49% 49% 50% 50% 50% 50% 51% 51% 51% 52% 52% 52% 53% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% Timeout! Resetting...No bootable disks! Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 512 MB Testing SIO Testing LCD Probing devices Testing 512MB 16MB chunks 1 to 16MB 16 to 32MB 32 to 48MB 48 to 64MB 64 to 80MB 80 to 96MB 96 to 112MB 112 to 128MB 128 to 144MB 144 to 160MB 160 to 176MB 176 to 192MB 192 to 208MB 208 to 224MB 224 to 240MB 240 to 256MB 256 to 272MB 272 to 288MB 288 to 304MB 304 to 320MB 320 to 336MB 336 to 352MB 352 to 368MB 368 to 384MB 384 to 400MB 400 to 416MB 416 to 432MB 432 to 448MB 448 to 464MB 464 to 480MB 480 to 496MB 496 to 512MB Complete Finding image... Loading 3 2 disk@0 ok ok ok ok ok ok ok ok ok ok  ok ok ok  ok ok ok ok ok Any word at all is a candidate. Use words to see the entire dictionary z z ? ok z z ? ok a ok  Any word at all is a candidate. Use words to see the entire dictionary disk disk ? ok ok ok ok  ok ok ok ok ok ok ok ok ok ok ok ok ok ok ok ok ok ok \ ok ok ok ok ] ] ] ] Any word at all is a candidate. Use words to see the entire dictionary ] Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 512 MB Testing SIO Testing LCD Probing devices Testing 512MB 16MB chunks 1 to 16MB 16 to 32MB 32 to 48MB 48 to 64MB 64 to 80MB 80 to 96MB 96 to 112MB 112 to 128MB 128 to 144MB 144 to 160MB 160 to 176MB 176 to 192MB 192 to 208MB 208 to 224MB 224 to 240MB 240 to 256MB 256 to 272MB 272 to 288MB 288 to 304MB 304 to 320MB 320 to 336MB 336 to 352MB 352 to 368MB 368 to 384MB 384 to 400MB 400 to 416MB 416 to 432MB 432 to 448MB 448 to 464MB 464 to 480MB 480 to 496MB 496 to 512MB Complete Finding image... Loading 3 2 disk@1 Can't open boot device Startup failed Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 512 MB Testing SIO Testing LCD Probing devices Testing 512MB 16MB chunks 1 to 16MB 16 to 32MB 32 to 48MB 48 to 64MB 64 to 80MB 80 to 96MB 96 to 112MB 112 to 128MB 128 to 144MB 144 to 160MB 160 to 176MB 176 to 192MB 192 to 208MB 208 to 224MB 224 to 240MB 240 to 256MB 256 to 272MB 272 to 288MB 288 to 304MB 304 to 320MB 320 to 336MB 336 to 352MB 352 to 368MB 368 to 384MB 384 to 400MB 400 to 416MB 416 to 432MB 432 to 448MB 448 to 464MB 464 to 480MB 480 to 496MB 496 to 512MB Complete Finding image... Loading 3 2 disk@0 ok ok ok ok Any word at all is a candidate. Use words to see the entire dictionary help go - Resume execution of OS boot - Boot the default OS boot - Boot from the specified disk printenv - Display all configuration variables setenv - Set a configuration variable devalias - Display all device aliases devalias - Create or change a device alias show-devs - Display the names of all devices Many other commands are available. ok go  go Starting ok ok ok ok ok hlep hlep ? ok help go - Resume execution of OS boot - Boot the default OS boot - Boot from the specified disk printenv - Display all configuration variables setenv - Set a configuration variable devalias - Display all device aliases devalias - Create or change a device alias show-devs - Display the names of all devices Many other commands are available. ok boot Loading 3 2 disk@1 Can't open boot device ok printenv Variable Name Value Default Value pci-probe-list 0,4,5,1,3 0,4,5,1,3 diag-switch? false false fcode-debug? true true oem-logo? false false oem-banner oem-banner? false false output-device com1 com1 input-device com1 com1 load-base 18446739676166356992 18446739675665137664 boot-command boot boot auto-boot? true true watchdog-reboot? false false diag-file diag-device floppy floppy boot-file boot-device floppy scsi-disk floppy scsi-disk local-mac-address? true true silent-mode? false false use-nvramrc? false false nvramrc More [,,q] ?  security-#badlogins 0 security-password security-mode none fcal-host-id 7 VERSION 2.8_a2 December 05, 2000 11:56:18 last-OS-booted-raid-ver 4 last-OS-booted-wafl-ver 13 last-OS-booted-ver NetApp Release 6.1R1 partner-sysid 0016807718 ok help go - Resume execution of OS boot - Boot the default OS boot - Boot from the specified disk printenv - Display all configuration variables setenv - Set a configuration variable devalias - Display all device aliases devalias - Create or change a device alias show-devs - Display the names of all devices Many other commands are available. ok ho  show-devs /cache /ha /leds /pci /memory@0 /aliases /options /openprom /chosen /packages /pci/pci@3 /pci/pci@1 /pci/nvram2@5 /pci/srvrnet@4 /pci/fcal@0 /pci/isa@2 /pci/pci@3/fcal@3 /pci/pci@3/fcal@2 /pci/pci@3/fcal@3/tape /pci/pci@3/fcal@3/disk /pci/pci@3/fcal@2/tape /pci/pci@3/fcal@2/disk More [,,q] ?  /pci/pci@1/ethernet@4 /pci/pci@1/scsi@3 /pci/pci@1/pci@2 /pci/pci@1/scsi@3/tape /pci/pci@1/scsi@3/disk /pci/pci@1/pci@2/pci8086,1209@7 /pci/pci@1/pci@2/pci8086,1209@6 /pci/pci@1/pci@2/pci8086,1209@5 /pci/pci@1/pci@2/pci8086,1209@4 /pci/fcal@0/tape /pci/fcal@0/disk /pci/isa@2/jumpers@i801 /pci/isa@2/watchdog@i803 /pci/isa@2/envstatus@i808 /pci/isa@2/lcd@i278 /pci/isa@2/floppy@i3f0 /pci/isa@2/parallel@i3bc /pci/isa@2/serial@i2f8 /pci/isa@2/serial@i3f8 /pci/isa@2/nvram@md0000 /pci/isa@2/rtc@i70 /pci/isa@2/timer@i40 /pci/isa@2/interrupt-controller@i20 More [,,q] ?  /pci/isa@2/dma-controller@i00 /openprom/client-services /packages/stringio /packages/disk-label /packages/iso9660-file-system /packages/fat-file-system /packages/obp-tftp /packages/deblocker ok ok help go - Resume execution of OS boot - Boot the default OS boot - Boot from the specified disk printenv - Display all configuration variables setenv - Set a configuration variable devalias - Display all device aliases devalias - Create or change a device alias show-devs - Display the names of all devices Many other commands are available. ok devalias net /pci/pci@1/ethernet@4 c /pci/fcal@0/disk@0:0 scsi /pci/fcal@0 a /floppy floppy /pci/isa/floppy com2 /isa/serial@2f8 com1 /isa/serial@3f8 ok ok go Starting ok ok help go - Resume execution of OS boot - Boot the default OS boot - Boot from the specified disk printenv - Display all configuration variables setenv - Set a configuration variable devalias - Display all device aliases devalias - Create or change a device alias show-devs - Display the names of all devices Many other commands are available. ok ok boot disk Timeout!iLIP Loading 3 2 disk@6disk 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% iLIP 12% 100% Bad checksum detected on kernel loadiLIP Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 20% 21% 21% 21% 22% 22% 22% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 20% 21% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 26% 27% 27% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 20% 21% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 26% 27% 27% 27% 28% 28% 28% 29% 29% 29% 30% 30% 30% 30% 31% 31% 31% 32% 32% 32% 33% 33% 33% 34% 34% 34% 35% 35% 35% 36% 36% 36% 37% 37% 37% 38% 38% 38% 39% 39% 39% 40% 40% 40% 40% 41% 41% 41% 42% 42% 42% 43% 43% 43% 44% 44% 44% 45% 45% 45% 46% 46% 46% 47% 47% 47% 48% 48% 48% 49% 49% 49% 50% 50% 50% 50% 51% 51% 51% 52% 52% 52% 53% 53% 53% 54% 54% 54% 55% 55% 55% 56% 56% 56% 57% 57% 57% 58% 58% 58% 59% 59% 59% 60% 60% 60% 60% 61% 61% 61% 62% 62% 62% 63% 63% 63% 64% 64% 64% 65% 65% 65% 66% 66% 66% 67% 67% 67% 68% 68% 68% 69% 69% 69% 70% 70% 70% 70% 71% 71% 71% 72% 72% 72% 73% 73% 73% 74% 74% 74% 75% 75% 75% 76% 76% 76% 77% 77% 77% 78% 78% 78% 79% 79% 79% 80% 80% 80% 80% 81% 81% 81% 82% 82% 82% 83% 83% 83% 84% 84% 84% 85% 85% 85% 86% 86% 86% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% Timeout! Resetting...No bootable disks! Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 512 MB Testing SIO Testing LCD Probing devices Testing 512MB 16MB chunks 1 to 16MB 16 to 32MB 32 to 48MB 48 to 64MB 64 to 80MB 80 to 96MB 96 to 112MB 112 to 128MB 128 to 144MB 144 to 160MB 160 to 176MB 176 to 192MB 192 to 208MB 208 to 224MB 224 to 240MB 240 to 256MB 256 to 272MB 272 to 288MB 288 to 304MB 304 to 320MB 320 to 336MB 336 to 352MB 352 to 368MB 368 to 384MB 384 to 400MB 400 to 416MB 416 to 432MB 432 to 448MB 448 to 464MB 464 to 480MB 480 to 496MB 496 to 512MB Complete Finding image... Loading 3 2 disk@0 12% 100% Bad checksum detected on kernel load 12% 100% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 16% 17% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 20% 21% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 26% 27% 27% 27% 28% 28% 28% 29% 29% 29% 30% 30% 30% 30% 31% 31% 31% 32% 32% 32% 33% 33% 33% 34% 34% 34% 35% 35% 35% 36% 36% 36% 37% 37% 37% 38% 38% 38% 39% 39% 39% 40% 40% 40% 40% 41% 41% 41% 42% 42% 42% 43% 43% 43% 44% 44% 44% 45% 45% 45% 46% 46% 46% 47% 47% 47% 48% 48% 48% 49% 49% 49% 50% 50% 50% 50% 51% 51% 51% 52% 52% 52% 53% 53% 53% 54% 54% 54% 55% 55% 55% 56% 56% 56% 57% 57% 57% 58% 58% 58% 59% 59% 59% 60% 60% 60% 60% 61% 61% 61% 62% 62% 62% 63% 63% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 20% 21% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 26% 27% 27% 27% 28% 28% 28% 29% 29% 29% 30% 30% 30% 30% 31% 31% 31% 32% 32% 32% 33% 33% 33% 34% 34% 34% 35% 35% 35% 36% 36% 36% 37% 37% 37% 38% 38% 38% 39% 39% 39% 40% 40% 40% 40% 41% 41% 41% 42% 42% 42% 43% 43% 43% 44% 44% 44% 45% 45% 45% 46% 46% 46% 47% 47% 47% 48% 48% 48% 49% 49% 49% 50% 50% 50% 50% 51% 51% 51% 52% 52% 52% 53% 53% 53% 54% 54% 54% 55% 55% 55% 56% 56% 56% 57% 57% 57% 58% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 20% 21% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 26% 27% 27% 27% 28% Timeout! Resetting...No bootable disks! Alpha Open Firmware by FirmWorks Copyright 1995-2000 FirmWorks, Network Appliance. All Rights Reserved. Firmware release 2.8_a2 Memory size is 512 MB Testing SIO Testing LCD Probing devices Testing 512MB 16MB chunks 1 to 16MB 16 to 32MB 32 to 48MB 48 to 64MB 64 to 80MB 80 to 96MB 96 to 112MB 112 to 128MB 128 to 144MB 144 to 160MB 160 to 176MB 176 to 192MB 192 to 208MB 208 to 224MB 224 to 240MB 240 to 256MB 256 to 272MB 272 to 288MB 288 to 304MB 304 to 320MB 320 to 336MB 336 to 352MB 352 to 368MB 368 to 384MB 384 to 400MB 400 to 416MB 416 to 432MB 432 to 448MB 448 to 464MB 464 to 480MB 480 to 496MB 496 to 512MB Complete Finding image... Loading 3 2 disk@2 12% 100% Bad checksum detected on kernel load 12% 100% 0% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% iLIP 12% 100% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 20% 21% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 26% 27% 27% 27% 28% 28% 28% 29% 29% 29% 30% 30% 30% 30% 31% 31% 31% 32% 32% 32% 33% 33% 33% 34% 34% 34% 35% 35% 35% 36% 36% 36% 37% 37% 37% 38% 38% 38% 39% 39% 39% 40% 40% 40% 40% 41% 41% 41% 42% 42% 42% 43% 43% 43% 44% 44% 44% 45% 45% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 20% 21% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 26% 27% 27% 27% 28% 28% 28% 29% 29% 29% 30% 30% 30% 30% 31% 31% 31% 32% 32% 32% 33% 33% 33% 34% 34% 34% 35% 35% 35% 36% 36% 36% 37% 37% 37% 38% 38% 38% 39% 39% 39% 40% 40% 40% 40% 41% 41% 41% 42% 42% 42% 43% 43% 43% 44% 44% 44% 45% 45% 45% 46% 46% 46% 47% 47% 47% 48% 48% 48% 49% 49% 49% 50% 50% 50% 50% 51% 51% 51% 52% 52% 52% 53% 53% 53% Timeout! 12% 100% 0% 0% 0% 0% 1% 1% 1% 2% 2% 2% 3% 3% 3% 4% 4% 4% 5% 5% 5% 6% 6% 6% 7% 7% 7% 8% 8% 8% 9% 9% 9% 10% 10% 10% 10% 11% 11% 11% 12% 12% 12% 13% 13% 13% 14% 14% 14% 15% 15% 15% 16% 16% 16% 17% 17% 17% 18% 18% 18% 19% 19% 19% 20% 20% 20% 20% 21% 21% 21% 22% 22% 22% 23% 23% 23% 24% 24% 24% 25% 25% 25% 26% 26% 26% 27% 27% 27% 28% 28% 28% 29% 29% 29% 30% 30% 30% 30% 31% 31% 31% 32% 32% 32% 33% 33% 33% 34% 34% 34% 35% 35% 35% 36% 36% 36% 37% 37% 37% 38% 38% 38% 39% 39% 39% 40% 40% 40% 40% 41% 41% 41% 42% 42% 42% 43% 43% 43% 44% 44% 44% 45% 45% 45% 46% 46% 46% 47% 47% 47% 48% 48% 48% 49% 49% 49% 50% 50% 50% 50% 51% 51% 51% 52% 52% 52% 53% 53% 53% 54% 54% 54% 55% 55% 55% 56% 56% 56% 57% 57% 57% 58% 58% 58% 59% 59% 59% 60% 60% 60% 60% 61% 61% 61% 62% 62% 62% 63% 63% 63% 64% 64% 64% 65% 65% 65% 66% 66% 66% 67% 67% 67% 68% 68% 68% 69% 69% 69% 70% 70% 70% 70% 71% 71% 71% 72% 72% 72% 73% 73% 73% 74% 74% 74% 75% 75% 75% 76% 76% 76% 77% 77% 77% 78% 78% 78% 79% 79% 79% 80% 80% 80% 80% 81% 81% 81% 82% 82% 82% 83% 83% 83% 84% 84% 84% 85% 85% 85% 86% 86% 86% 87% 87% 87% 88% 88% 88% 89% 89% 89% 90% 90% 90% 90% 91% 91% 91% 92% 92% 92% 93% 93% 93% 94% 94% 94% 95% 95% 95% 96% 96% 96% 97% 97% 97% 98% 98% 98% 99% 99% 99% 100% Starting Press CTRL-C for special boot menu ................................................................................................................ Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.10(0xfffffc00012deee0, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.11(0xfffffc00012df140, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.12(0xfffffc00012df3a0, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.13(0xfffffc00012df600, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.14(0xfffffc00012df860, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. Thu Jan 1 00:00:00 GMT [isp_timeout:warning]: 0b.15(0xfffffc00012dfac0, 0x12): command timeout, quiescing bus to allow outstanding I/O to complete. NetApp Release 6.1R1: Fri Apr 20 03:08:22 PDT 2001 Copyright (c) 1992-2001 Network Appliance, Inc. Starting boot on Tue Aug 12 20:55:43 GMT 2008 Tue Aug 12 20:55:58 GMT [net_e0:info]: Ethernet e0: Link up. Tue Aug 12 20:56:34 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.4: request failed after retry #0: cdb 0x1b. Tue Aug 12 20:56:48 GMT [ispfc_init_1:warning]: Resetting Fibre Channel adapter 6. ispfc: 13 loop-initialization events seen in 60 seconds on Fibre Channel adapter 6: indicates loop stability problem. Tue Aug 12 20:57:17 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.5: request failed after retry #0: cdb 0x25. Tue Aug 12 20:57:17 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.6: request failed after retry #0: cdb 0x25. Tue Aug 12 20:57:17 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.11: request failed after retry #0: cdb 0x00. Tue Aug 12 20:57:17 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.12: request failed after retry #0: cdb 0x00. Tue Aug 12 20:57:17 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.13: request failed after retry #0: cdb 0x00. Tue Aug 12 20:57:17 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.14: request failed after retry #0: cdb 0x25. ispfc: 12 loop-initialization events seen in 60 seconds on Fibre Channel adapter 6: indicates loop stability problem. Tue Aug 12 20:58:03 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.2: request failed after retry #0: cdb 0x1a. Tue Aug 12 20:58:03 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.5: request failed after retry #0: cdb 0x00. Tue Aug 12 20:58:03 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.6: request failed after retry #0: cdb 0x00. Tue Aug 12 20:58:03 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.14: request failed after retry #0: cdb 0x1c. Tue Aug 12 20:58:13 GMT [ispfc_init_1:warning]: Resetting Fibre Channel adapter 6. Tue Aug 12 20:58:27 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.4: request failed after retry #0: cdb 0x1b. Tue Aug 12 20:58:37 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.5: request failed after retry #0: cdb 0x12. Tue Aug 12 20:58:37 GMT [scsi.cmd.pastTimeToLive:error]: Device 6.6: request failed after retry #0: cdb 0x12.