AltaVault in MS Hyper-V with the Status: not ready - initialization error

TonyWu — Wed, 04 Jun 2025 19:19:52 GMT

Hi All,

There is an error with the following after the I added the HDVX or HDV before the first boot up. Please advise is there any trick in Hyper-V because there is no such issue with ESXi environment.

Status: not ready - initialization error

There is some error log as well.

Aug 27 07:43:28 ava03 mgmtd[3317]: [mgmtd.WARNING]: Exit with code 1 from /opt/rbt/bin/megastore_stats_dump.py
Aug 27 07:43:28 ava03 mgmtd[3317]: [mgmtd.WARNING]: Exit with code 1 from /usr/bin/du
Aug 27 07:43:29 ava03 statsd[3877]: event_pending: event has no event_base set.
Aug 27 07:43:38 statsd[3877]: last message repeated 4 times
Aug 27 07:43:38 ava03 mgmtd[3317]: [mgmtd.WARNING]: Exit with code 1 from /opt/rbt/bin/megastore_stats_dump.py
Aug 27 07:43:38 ava03 mgmtd[3317]: [mgmtd.WARNING]: Exit with code 1 from /usr/bin/du
Aug 27 07:43:40 ava03 mgmtd[3317]: [mgmtd.WARNING]: Exit with code 1 from /opt/rbt/bin/megastore_stats_dump.py
Aug 27 07:43:40 ava03 mgmtd[3317]: [mgmtd.WARNING]: Exit with code 1 from /usr/bin/du
Aug 27 07:43:40 ava03 mgmtd[3317]: [mgmtd.WARNING]: Exit with code 1 from /opt/rbt/bin/megastore_stats_dump.py
Aug 27 07:43:42 ava03 statsd[3877]: event_pending: event has no event_base set.

Please give me some advise. Many Thanks.

Best Regards,

Tony Wu

Re: AltaVault in MS Hyper-V with the Status: not ready - initialization error

chriswong — Thu, 08 Sep 2016 19:26:46 GMT

Tony,

As we discussed via email, this situation should be resolved as this was a problem with the 4.2.1 Hyper-V package loaded on the support website. The correct package is now available and this should provide for appropriate installation of AltaVault in Hyper-V.

Let me know if this addresses your concern.

Regards,

Christopher

topic Re: AltaVault in MS Hyper-V with the Status: not ready - initialization error in NetApp Console

AltaVault in MS Hyper-V with the Status: not ready - initialization error

Re: AltaVault in MS Hyper-V with the Status: not ready - initialization error