topic Re: StorgeGRID - Failed to perform final install step in NetApp Console

StorgeGRID - Failed to perform final install step

rsingh28 — Wed, 04 Jun 2025 12:20:40 GMT

Hello Team

I'm failing to complete install of NetApp StorageGRID Appliance with VMware Admin Node. Everything goes fine except in the last step the installation fails stating below, screenshot attached.

Waiting for other grid nodes
Error: Failed to perform final install steps. Please see the logs for additional information.

The Admin node is in a different subnet than the StorageGRID appliance nodes, However we've requested for the ports to be open on firewall for communication between the nodes. Any specific port that needs to be checked here if it is open or not ? which could be causing issue?

Thanks

Rakesh

Re: StorgeGRID - Failed to perform final install step

Anumode — Fri, 30 Aug 2019 09:32:09 GMT

Please check your networking firewall settings/ commucation between the nodes in the StorageGRID

Reference on the Networking port to be allowed for SGRID

https://library.netapp.com/ecmdocs/ECMP12031298/html/GUID-A63C0481-022A-4CE6-B9F9-87D23C5FCE1E.html

If you still facing after checking above, then i would advise you to open a Support ticket with NetApp Technical Support

Re: StorgeGRID - Failed to perform final install step

rsingh28 — Mon, 02 Sep 2019 07:43:45 GMT

Yes, we solved it by rechecking the firewall rules so your analysis is right.

The network team forgot to specify port 9999 when opening port. We had to ask them to recheck and they found the gap.

Thanks for taking time to look into this.

Cheers!!