topic Re: Altavault Data in NetApp Console

Altavault Data

RonGilliam — Wed, 04 Jun 2025 11:19:53 GMT

I have a s3 bucket with data copied from another s3 bucket. How can I set up a new altavault server and connect to that data? I do not have access to the old altavault to do a migration.

Re: Altavault Data

Ontapforrum — Fri, 07 Feb 2020 18:00:26 GMT

Hi,

Information around Altavault is limited....But, I think there is 'virtual altavault' (software version) which you can spin-up/build and then use it to connect to s3 (may be). I have no idea but try to look up for info. I will see if I can find some info.

virtual AltaVault hardware requirements?
https://kb.netapp.com/app/answers/answer_view/a_id/1087128

Thanks!

Re: Altavault Data

RonGilliam — Fri, 07 Feb 2020 20:45:43 GMT

thanks I have a new one spun up I'm just trying to figure out how to get it to see that data, I would guess it will need to catalogue it all.

Re: Altavault Data

Ontapforrum — Mon, 10 Feb 2020 10:22:15 GMT

All I can say is - you are heading in the right direction. It's not easy to get help on AltaVault as far as documentation is concerend, b'cos most of the TRs on AltaVault has been taken-off from the web. I had one saved, so I am attaching it here, take a look if you could find anything useful to your scenario (Section 3.1 ?).