topic XCP error: Cannot allocate memory when sync nfs data in General Discussion

XCP error: Cannot allocate memory when sync nfs data

Chinauser — Tue, 08 Dec 2020 04:20:18 GMT

Hello everyone,

I use xcp synnc nfs data ,after several hours, XCP error: Cannot allocate memory,I find xcp user manual,

Please follow the instructions in the following KBarticle: Cannot allocate memory when synching

NFS data.

https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/NetApp_XCP/XCP:_ERROR:_Cannot_allocate_memory_-_when_syncing_NFS_data

But I have not premission seeing KB，who can help me.

Thanks

Re: XCP error: Cannot allocate memory when sync nfs data

darb0505 — Tue, 08 Dec 2020 05:45:56 GMT

Hi Chinauser,

Do you have a NetApp support account that you can sign into? You have to have an account registered with NetApp Support to be able to fully view KB articles.

Typically with this particular error, it is recommended to increase the memory and attempt to rerun the sync.

Let us know if you have additional questions.

Thanks

Re: XCP error: Cannot allocate memory when sync nfs data

Chinauser — Wed, 09 Dec 2020 01:20:44 GMT

I had now account,i am netapp PS partner,but prompt me not Permission to access

Re: XCP error: Cannot allocate memory when sync nfs data

darb0505 — Wed, 09 Dec 2020 07:44:21 GMT

Hi Chinauser,

I would recommend reaching out to our customer support team to open a non-technical case so we can review the permissions to make sure they are setup correctly.

Link: NetApp Technical Support

Thanks

Re: XCP error: Cannot allocate memory when sync nfs data

wareer — Mon, 18 Nov 2024 08:25:25 GMT

Applicable on XCP Version 1.6.1 and above:
1)   Increase RAM
2)   run sync using "-reduce" option. Sync is expected to finish with errors. Once sync is finished, run subsequent syncs more frequently.
./xcp sync -id <index> -reduce
3)   if sync fails again in above step with memory related errors, then
Increase RAM
   Execute a new base copy of the data
   Execute the sync again
   Schedule the sync in shorter intervals

Applicable on XCP Version 1.6 and below:
1.   Increase RAM
2.   Run sync with “-parallel 0”
./xcp sync -id <index> -parallel 0
3.   If sync failed again with memory errors, then do the following
Increase RAM
   Execute a new base copy of the data
   Execute the sync again
   Schedule the sync in shorter intervals