topic Re: Adding disk shelf to FAS8040 in General Discussion

Adding disk shelf to FAS8040

RobertM — Mon, 14 Jan 2019 19:16:24 GMT

I am planning to add a new DS4246 disk shelf to an existing 6 node FAS8040. We have installation services and I need to answer the question:

"Please confirm if this shelf will be added to an existing loop or will a new loop needed to be created"

Any information is appreciated.

Re: Adding disk shelf to FAS8040

AlexDawson — Wed, 16 Jan 2019 03:14:43 GMT

Hi there!

This question relates to if the disk shelf will be added to an existing stack (formerly loop) of shelves. It is suggested that SATA disks should be on a different stack, as well as 3G/6G and a seperate stack is required for 12G SAS shelves.

If you're adding a new shelf of disks that is the same type of disks to your existing disks, and you have 9 or less of that type of disk shelf (3 for SSD) connected to each controller pair, you will not need a new stack.

For an exact answer for your scenario, you should contact your netapp or partner solutions architect/engineer, or our professional services coordinator who asked that question.

Hope this helps!

Re: Adding disk shelf to FAS8040

weiliu — Fri, 18 Oct 2024 09:10:29 GMT

Please confirm that you have reached the upper limit of the disk rack limit in the SAS stack.

Each SAS storage shelf stack can contain up to 10 shelves with the following exceptions:

DS4486 48-disk shelves are limited to 5 per stack
DS460C 60-disk shelves are limited to 4 per stack
For a mixture of shelves, the limit is 240 disks in the stack or 10 shelves in the stack (whichever is reached first)

You also need to check whether the same SAS stack contains the IOM12 disk rack, it is recommended not to exist in the same stack