ontap 9 snmp missing OIDS?

william — Wed, 04 Jun 2025 12:42:41 GMT

So in ontap 7 I could query the global status amongst other things using this OID.

# snmpwalk -v1 -c public 196.168.0.2 .1.3.6.1.4.1.789.1.2.2.4.0
SNMPv2-SMI::enterprises.789.1.2.2.4.0 = INTEGER: 3

# snmpwalk -v1 -c public 196.168.0.2 .1.3.6.1.4.1.789.1.2.2.25.0

SNMPv2-SMI::enterprises.789.1.2.2.25.0 = STRING: "The system's global status is normal. "

Other things are available too

# snmpwalk -v1 -c public 192.168.0.2 .1.3.6.1.4.1.789.1.2.4
SNMPv2-SMI::enterprises.789.1.2.4.1.0 = INTEGER: 1
SNMPv2-SMI::enterprises.789.1.2.4.2.0 = INTEGER: 0
SNMPv2-SMI::enterprises.789.1.2.4.3.0 = STRING: "There are no failed fans."
SNMPv2-SMI::enterprises.789.1.2.4.4.0 = INTEGER: 0
SNMPv2-SMI::enterprises.789.1.2.4.5.0 = STRING: "There are no failed power supplies."

With ontap 9 nothing is returned

# snmpwalk -v1 -c public 192.168.0.3 .1.3.6.1.4.1.789.1.2.2.4.0

# snmpwalk -v1 -c public 192.168.0.3 .1.3.6.1.4.1.789.1.2.4

Where can I get this information from?

Re: ontap 9 snmp missing OIDS?

gaurav_verma — Tue, 19 Mar 2019 20:53:11 GMT

Can you try this

snmpwalk -v1 -c public 192.168.0.3 system

I hope this IP address is for your mgmt port. Also check if snmp is enabled.

topic ontap 9 snmp missing OIDS? in General Discussion

ontap 9 snmp missing OIDS?

Re: ontap 9 snmp missing OIDS?