topic Re: Installing FAS8200 with ADP in General Discussion

Installing FAS8200 with ADP

pete_veenbaas — Wed, 04 Jun 2025 11:33:19 GMT

Greetings - I'm trying to reinstall Ontap 9.6P2 w/ADP on a FAS8200 with DS212C shelf w/12x8TB disk and a DS224C shelf w/24x2TB SAS disks.

The VAR did not configure ADP originally and used up some of the 7TB for the root partitions. When I go through the re-init, I'm choosing Option 9 --> Option 9A (both nodes), then reboot and choose option 9B.

When the system comes back up with ADP, it is setting drives on both shelves as 'shared', with each shelf/node hosting an aggr0xxx - Using 10 drives on each shelf e.g.:

DS212C Shelf:

1.11.0 7.14TB 11 0 FSAS shared a01n02_SATA, aggr0_lndscl02_02

DS224C Shelf:

2.12.0 1.63TB 12 0 SAS shared a02n01_SAS, aggr0_lndscl02_01

Is this how ADP is supposed to look on a FAS8200? Am I able to set it up so that on the DS212C/8TB disk shelf has ADP installed?

Thx for any info!

Pete

Re: Installing FAS8200 with ADP

GidonMarcus — Tue, 03 Dec 2019 15:22:58 GMT

Hi. You can disconnect one of the shelves or take disks out while you do- it so it dosen't apply to them.... the initialization will try to use as many drives as supported for the ADP. (see HWU for the different config)

Re: Installing FAS8200 with ADP

pete_veenbaas — Tue, 03 Dec 2019 15:27:30 GMT

Hi Gidi -

Thanks for response!

The system is remote with no onsite support, so I will most likley just live with the small space that gets used up on the 2Tb drives as the usable space will shrink a bit on each drive for aggregate use.

Thx again,

Pete

Re: Installing FAS8200 with ADP

GidonMarcus — Tue, 03 Dec 2019 15:41:58 GMT

You can maybe disable the disks bays from remote:

https://kb.netapp.com/app/answers/answer_view/a_id/1029350