topic StorageGrid Sizer not working avail capacity.. in General Discussion

StorageGrid Sizer not working avail capacity..

zoo123 — Wed, 04 Jun 2025 11:15:44 GMT

Hi. experts~

We are going to try to calculate the capacity through the storageGrid sizer.

However, the capacity below is not displayed properly.

can I know problem?

Thanks all..

NetAppSEAL — Mon, 30 Mar 2020 09:25:02 GMT

A few things to try...

Change the drop-down for "HW Raid Protection" in the "HW Setup" portion of the Sizer from "DDP16" to "DDP"
When sizing for FabricPool, ensure that the value for "Average Object Size [MB]" is set to 4
For the "Read / Write Ratio" section, should reflect 80 / 20, but remove the "%", only include the numeric value

Attached is a screenshot of a similar sizing that shows all outputs being populated correctly.

Hope this helps.

Cheers,
Trey

zoo123 — Wed, 01 Apr 2020 04:11:33 GMT

Hi Trey.

Thank you very much for your solution.

But I can't solve the problem.. sorry.

Run the Excel sizer and first select a another model..Immediately an error(#NAME?) occurs.

Could it be Excel's option or version problem?

Attached is a screenshot.

Thanks.