SDU 4.1.1 help

bethel — Thu, 05 Jun 2025 07:22:50 GMT

IHAC who is running 64 bit RHAS 4 u6 with 32 bit emulation installed. I have a problem that looks like the typical HTTPS/SSL being the default setting of snapdrive.conf. HTTPS/SSL is turned on on the filer. "snapdrive snap list -filer filername" works. "snapdrive config access list filername" shows:

Commands allowed:

snap create

snap restore

snap delete

snap rename

storage create

storage resize

snap connect

storage connect

storage delete

snap disconnect

storage disconnect

When I do a "snapdrive storage show -all", I receive:

0001-185 Command error: storage show failed: no NETAPP devices to show or add the host to the trusted hosts (options trusted.hosts) and enable SSL on the storage system or retry after changing snapdrive.conf to use http for storage system communication and restarting snapdrive daemon.

I'm confused. Why would the first 2 commands succeed and the last one fail.

Thanks

Re: SDU 4.1.1 help

pascalduk — Mon, 19 Oct 2009 07:48:27 GMT

The error message says either you don't have LUNs connected or snapdrive can't access the filer. Since you already verified that access works, the error appears because you don't have LUNs connected.

Did you already try connecting or creating a LUN?

Re: SDU 4.1.1 help

adityav — Mon, 19 Oct 2009 07:54:26 GMT

Have you connected luns to the host ? If you have , then send the trace logs by running snapdrive.dc utility

topic Re: SDU 4.1.1 help in Data Protection

SDU 4.1.1 help

Re: SDU 4.1.1 help

Re: SDU 4.1.1 help