topic No option to commit changes to NTP in System Configuration Menu NetApp DatBroker in Data Protection

No option to commit changes to NTP in System Configuration Menu NetApp DatBroker

Sanjuro — Wed, 04 Jun 2025 10:32:08 GMT

Option 5 gives the option to change NTP IP Address/FQDN with comma separated values. You can input these values and get a message that says that it was changed successfully and to press ENTER to continue. Once you do that and select "x" to EXIT a message pops up saying you have changes that have not been committed and if you're sure you want to exit with a y/n prompt but none of the 9 options on the system configuration page offers to commit the changes. There is nowhere I can even find out what my NTP is currently set to.

Re: No option to commit changes to NTP in System Configuration Menu NetApp DatBroker

hmoubara — Fri, 12 Mar 2021 03:01:26 GMT

Hello,

In able to check your NTP settings you will have to access diagnostic shell from the Main menu (option 4 >> option2).

Once you are at the prompt, login with the maint or root user and you can cat the ntp.conf file

diag@databroker:: cat /etc/ntp.conf

As far as for the commit option, there is one under the main menu (option 3 >> option 7)

Thanks