"Not Allowed" error when running backup job on profile from upgrade from 3.6 to 4.0p1

michaeldparker — Thu, 05 Jun 2025 05:54:23 GMT

Hi All,

We have been running 3.6 fine. Recently I upgraded Ontap to 8.1.3 to address known bugs. SC still worked. To allow us to upgrade VMware to 5.1, I upgraded OnCommand Unified to 5.2. SC is integrated with protection manager. At that point, the SC jobs still ran and seem to run fine, but was getting a message about multiple errors occurring. In hopes of resolving this, I upgraded SC to 4.01p1 following the documentation. When I do a backup against a DB2 server, I now receive this error:

[agt-00011] Command ["D:/Program Files/NetApp/SnapDrive/sdcli" snap create -m cdctops1 -s cdctops1-daily_20130912094805 -D G: H: I: J: -u no] is not allowed

This is a command that we are specifying be run to create the snapshots. This has always worked in the past, but now does not. So far, I've not been able to figure out why this error occurs. I see that the install guide has to say this for the agt-00011 error:

A command was sent to the agent but is not allowed. Update the agent.conf to allow the command

My agents.conf file has these parameters in it (copied old conf file):

host: scServer@*

command: *

Thanks

Michael

Re: "Not Allowed" error when running backup job on profile from upgrade from 3.6 to 4.0p1

michaeldparker — Thu, 12 Sep 2013 14:48:55 GMT

Ooops! Never fine. False alarm on that error. I thought I had copied my agent.conf file, but I did not. I'm now past that error, but getting something completely different. Let me do a little bit of due diligence first and I'll post with the new error if I cannot figure it out.

Thanks

Michael

topic Re: "Not Allowed" error when running backup job on profile from upgrade from 3.6 to 4.0p1 in Data Protection

"Not Allowed" error when running backup job on profile from upgrade from 3.6 to 4.0p1

Re: "Not Allowed" error when running backup job on profile from upgrade from 3.6 to 4.0p1