topic Re: SC4.0 OSSV Support in Data Protection

SC4.0 OSSV Support

marks — Thu, 05 Jun 2025 05:59:21 GMT

Does anyone have a write up of the steps required for enabling OSSV backup via the SC 4.0 GUI? I need this for Linux and Windows clients.

Thanks,

Mark

Re: SC4.0 OSSV Support

ktenzer — Mon, 01 Jul 2013 15:02:32 GMT

It is a CLI only option

You can in GUI download config, edit it locally, and then upload but you need to change the OSSV* settings yourself. In addtion you need to do a snapvault status on OSSV host and add that to VOLUMES parameter. Format is "host:<path>" for example VOLUMES=myhost:C\

I think in windows you have to leave off the ":" as we use this as a separator.

Regards,

Keith

Re: SC4.0 OSSV Support

marcel_juhnke — Tue, 02 Jul 2013 10:02:11 GMT

I paste you a sample of configuration options that work for us:

VOLUMES=HOFDBDC2001:SystemState #(this is the source dir on the OSSV agent)

NTAP_USERS=secondary:user/passwd

NTAP_OSSV_FS_SNAPSHOT=N

NTAP_OSSV_FS_SNAPSHOT_CREATE_CMD01=

NTAP_OSSV_HOMEDIR="C:\Program Files\NetApp\snapvault"

NTAP_OSSV_ENABLE=Y

APP_IGNORE_ERROR=Y

The parameter to ignore app errors is needed, because otherwise the SC job always puts out a failure, because it thinks the two 'Transfer Error' lines in the ossv output (as follows) indicates an error in the application quiesce.

[2013-06-24 04:56:12,170] DEBUG: [10.135.200.131:28002(4.0.0.1)] ossv snapvault status: "C:\Program Files\NetApp\snapvault"/bin/snapvault status -l SystemState finished with
exit code: 0
stdout: Snapvault primary is ON

Source:                       HOFDBDC2002:SystemState
Destination:                  p2psd014:/vol/hofdbx_mgmt_svault/HOFDBDC2002_SystemState
Status:                       Transferring
State:                        Source
Lag:                          24:01:04
Mirror Timestamp:             -
Base Snapshot:                -
Current Transfer Type:        -
Contents:                     -
Last Transfer Type:           -
Last Transfer From:           -
Bytes transferred so far:     0 KB
Transfer Time Elapsed:        00:00:01
Current Transfer Throttle:    Unthrottled
Total files to transfer:      13513
Total files transferred:      0
Current File Size:            0
Current File Progress:        0
Current File Name:
Transfer Error ID:            -
Transfer Error Message:       -

Re: SC4.0 OSSV Support

kletzly — Sun, 07 Jul 2013 03:42:21 GMT

I took Marcel's example above which was non-Windows

and have pasted relevant parts from my config file -- which will show windows syntax

VOLUMES=MJK_4_NTAPSC:C\OPT\PlaySvBackup

NTAP_OSSV_ENABLE=Y

NTAP_OSSV_HOMEDIR=C:\OPT\snapvault

NTAP_OSSV_FS_SNAPSHOT=N

NTAP_OSSV_FS_SNAPSHOT_CREATE_CMD01=

etc.