topic Applying or Upgrading from 3.4.0 to 3.4p1 in Data Protection https://community.netapp.com/t5/Data-Protection/Applying-or-Upgrading-from-3-4-0-to-3-4p1/m-p/37390#M3206 <HTML><HEAD></HEAD><BODY><P>There is really no upgrade, you install 3.4p1 and copy config files/logs. Anything in gui must be re-created so if you setup schedules.</P><P></P><P>SC 3.4p2 should be out soon with it you can copy the gui/snapcreator folder to preserve any gui schedules, this doesnt work in 3.4p1 unfortunately.</P><P></P><P>I would probably wait for SC 3.4p2 unless you are using SC to backup Lotus Domino.</P><P></P><P>Regards, </P><P></P><P>Keith </P></BODY></HTML> Wed, 02 Nov 2011 18:03:42 GMT ktenzer 2011-11-02T18:03:42Z Applying or Upgrading from 3.4.0 to 3.4p1 https://community.netapp.com/t5/Data-Protection/Applying-or-Upgrading-from-3-4-0-to-3-4p1/m-p/37385#M3205 <HTML><HEAD></HEAD><BODY><P>Has anyone applied this version?&nbsp; If so did encounter any issues?</P><P>Thanks for your response.</P></BODY></HTML> Thu, 05 Jun 2025 06:42:04 GMT https://community.netapp.com/t5/Data-Protection/Applying-or-Upgrading-from-3-4-0-to-3-4p1/m-p/37385#M3205 debpearenetapp 2025-06-05T06:42:04Z Applying or Upgrading from 3.4.0 to 3.4p1 https://community.netapp.com/t5/Data-Protection/Applying-or-Upgrading-from-3-4-0-to-3-4p1/m-p/37390#M3206 <HTML><HEAD></HEAD><BODY><P>There is really no upgrade, you install 3.4p1 and copy config files/logs. Anything in gui must be re-created so if you setup schedules.</P><P></P><P>SC 3.4p2 should be out soon with it you can copy the gui/snapcreator folder to preserve any gui schedules, this doesnt work in 3.4p1 unfortunately.</P><P></P><P>I would probably wait for SC 3.4p2 unless you are using SC to backup Lotus Domino.</P><P></P><P>Regards, </P><P></P><P>Keith </P></BODY></HTML> Wed, 02 Nov 2011 18:03:42 GMT https://community.netapp.com/t5/Data-Protection/Applying-or-Upgrading-from-3-4-0-to-3-4p1/m-p/37390#M3206 ktenzer 2011-11-02T18:03:42Z