topic SnapCreator/SnapMirror Update and SnapDrive in Data Protection

SnapCreator/SnapMirror Update and SnapDrive

debpearenetapp — Thu, 05 Jun 2025 06:46:54 GMT

I have the options set for SnapMirror Update and I am using SnapDrive for snapshot creation. I am not getting any errors but the SnapMirror Update does not occur. I can sent conf and out files if needed.

Thanks.

Deb

SnapCreator/SnapMirror Update and SnapDrive

ktenzer — Wed, 31 Aug 2011 15:38:36 GMT

I would recommend either opening a support case with NGS if this is urgent or sending us logs and config

Also double check:

SNAPMIRROR_VOLUMES must be set and should equal VOLUMES parameter

NTAP_SNAPMIRROR_UPDATE=Y

Regards,

Keith

SnapCreator/SnapMirror Update and SnapDrive

debpearenetapp — Wed, 31 Aug 2011 20:12:43 GMT

I had to configure secondary interfaces then it updated the snapmirror.

SnapCreator/SnapMirror Update and SnapDrive

ktenzer — Wed, 31 Aug 2011 22:32:59 GMT

Yep forgot to mention if snapmirror is not using default filer name/interface then you have to use SECONDARY_INTERFACES so SC can map to correct interface.

Regards,

Keith