topic Re: snapmirror error 13102 in Data Protection

snapmirror error 13102

TDUBB1234 — Thu, 05 Jun 2025 06:24:35 GMT

I keep getting a snapmirror error or 13102.

cannot connect to source filer. any idea?

Re: snapmirror error 13102

mike_burris — Wed, 20 Jun 2012 16:07:16 GMT

How/what is the network setup between the two systems? Is there a firewall between them? If so, are the required ports open? Found this article: https://kb.netapp.com/support/index?page=content&id=1011333 Something else to check, has snapmirror.access been setup on each system so they can talk to each other?

Re: snapmirror error 13102

TDUBB1234 — Wed, 20 Jun 2012 18:16:40 GMT

bnot sure what happened. it seems to be working now. but I am trying to setup a ms cluster across sites so I have snapmirror from source vol to destination vol. when i failover the ms cluster resource from source to destination, the destination drive remains as eadable only and not writable. what do I have to do to make that writable?

Re: snapmirror error 13102

mike_burris — Wed, 20 Jun 2012 18:27:44 GMT

You'll have to break the SnapMirror (or clone the destination possibly). If this is a SnapManager program, which should be utilizing SnapDrive, SnapDrive should be able to break the mirror from what I've glimpsed over documentation wise...

Re: snapmirror error 13102

SUDHEER_H21 — Wed, 20 Jun 2012 19:59:15 GMT

This is the procedure if you want to make the snapmirror destination volume writable:

1. Verify the status of the snapmirrors

Source> snapmirror status (if possible)

Dest> snapmirror status

2. Finish writes to fas1_vol1

Dest> snapmirror quiesce source_vol1

3. Break volume fas1_vol1 from the snapmirror relationship

FAS2> snapmirror break source_vol1

For QSM:

1. Verify the status of the snapmirrors. SnapMirror must be on.

Dest> snapmirror status

2. Finishes any write activity and then disables further updates

Dest> snapmirror quiesce /vol/vol0/mymirror

3. Break the snapmirror relationship

Dest> snapmirror break Dest:/vol/vol0/mymirror

After using the snapmirror break command to temporarily break a SnapMirror relationship between a source and destination, you can use other SnapMirror commands to either make the break permanent, or restore or redefine the SnapMirror relationship.

• Use the snapmirror release command to make the break permanent.

• Use the snapmirror resync command to restore or redefine the SnapMirror relationship.

Re: snapmirror error 13102

TDUBB1234 — Wed, 20 Jun 2012 21:58:50 GMT

ok now i broke the mirror, destination drive is writable. but a reverse resync gives another error.

SnapMirror transfer request from lun_19Jun2012_175417_vol_SnapMirror_20Jun2012_074939 to host eq-ntap2 at IP address 10.51.1.11 denied: check options snapmirror.access.

Re: snapmirror error 13102

scottgelb — Wed, 20 Jun 2012 22:40:35 GMT

you need snapmirror.access set on both sides... so both systems need to allow each other

Re: snapmirror error 13102

TDUBB1234 — Wed, 20 Jun 2012 22:55:31 GMT

ok I added

on both filers

options snapmirror.access host=remotehost1

options snapmiorror.access host=remotehost2

it seems to work. but after the successful resync. the volume was still only in read mode. I had to do a manual mscs failover to the other site node and a failback before the volume shows as writable.

why is that? I am not using snapdrive

Re: snapmirror error 13102

scottgelb — Wed, 20 Jun 2012 23:27:57 GMT

After any resync you have to break to make writable. Then do the sync the other way after again

Sent from my iPhone 4S

Re: snapmirror error 13102

TDUBB1234 — Thu, 21 Jun 2012 00:29:47 GMT

how can i delete old snapmirrors in unknown state. the destination and source volumes are already deleted. when i try to delete them i get the error

==ERROR==

com.netapp.sysmgr.client.api.NaApiFailureException

==TIME==

2012-06-20 17:29:14,857

==MESSAGE==

No volume named 'mscluster_rw_vol' exists (Error: 13040)

==DETAILS==

No details are available.

==CORRECTIVE ACTION==

No suggested corrective action is available.

==LOCATION==

Location is not specified.

==BROWSER INFO==

App Name: Microsoft Internet Explorer

App Version: 5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; MS-RTC LM 8; .NET4.0E; MS-RTC EA 2)

App Codename: Mozilla

User Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; MS-RTC LM 8; .NET4.0E; MS-RTC EA 2)

Platform: Win32

Cookie Enabled: true

Re: snapmirror error 13102

scottgelb — Thu, 21 Jun 2012 00:34:38 GMT

Check for old snapshots (delete or snapmirror release) and unused snapmirror.conf entries and they will clear

Sent from my iPhone 4S

Re: snapmirror error 13102

SUDHEER_H21 — Thu, 21 Jun 2012 13:58:50 GMT

To release partners from a snapmirror relationship, do: snapmirror release vol1 dest::vol2

On the destination, do : snapmirror break

On the destination, do: snapmirror status -l to find out which snapshot copy basename is associated with the SnapMirror relationship that you just broke.

On the destination, do: snap delete dest_vol snapshot_basename to delete the Snapshot copy set that you displayed in the previous step.

Finally, edit the /etc/snapmirror.conf file on the destination system. Locate and delete the entry that specifies the SnapMirror relationship you want to end.

Re: snapmirror error 13102

TDUBB1234 — Thu, 21 Jun 2012 16:46:50 GMT

the source and destination volumes do not exist anymore. but I am still seeing the snapmirror relationships under snapmirror.

when i try to release or break them

i get these

rw-ntap2> snapmirror break -f rw-ntap2:mscluster_eq_vol_SnapMirror

snapmirror break: mscluster_eq_vol_SnapMirror: destination is offline, is restricted, or does not exist

rw-ntap2> snapmirror break -f mscluster_eq_vol_SnapMirror

snapmirror break: mscluster_eq_vol_SnapMirror: destination is offline, is restricted, or does not exist

rw-ntap2> snapmirror release eq-ntap2:mscluster_eq_vol rw-ntap2:mscluster_eq_vol_SnapMirror

snapmirror release: eq-ntap2:mscluster_eq_vol, rw-ntap2:mscluster_eq_vol_SnapMirror: argument must be a volume name or a qtree path

Re: snapmirror error 13102

scottgelb — Thu, 21 Jun 2012 16:56:31 GMT

If no volume and no snapmirror.conf entries. Then possibly a registry entry and a case should be opened to check and remediate if that issue.