topic vfiler only access for Ops Mgr in Data Protection https://community.netapp.com/t5/Data-Protection/vfiler-only-access-for-Ops-Mgr/m-p/2523#M8918 <HTML><HEAD></HEAD><BODY><P>I have a scenario where we are using vfilers on separate VLAN segments.&nbsp; None of the segments have access to the main FAS controller.&nbsp; Our goal is to use Snapdrive with RBAC so we setup an Ops Mgr server on one of the vlan segments. </P><P></P><P>The client system has access to the vfiler and the Ops Mgr system.&nbsp; Plus basic snapdrive works with the vfiler.&nbsp;&nbsp; But Ops Mgr can not register the vfiler as a host unless it has access to the FAS controller.</P><P></P><P>Is there anyway to make this work?&nbsp;&nbsp;&nbsp;&nbsp; </P></BODY></HTML> Thu, 05 Jun 2025 07:00:50 GMT kutner 2025-06-05T07:00:50Z vfiler only access for Ops Mgr https://community.netapp.com/t5/Data-Protection/vfiler-only-access-for-Ops-Mgr/m-p/2523#M8918 <HTML><HEAD></HEAD><BODY><P>I have a scenario where we are using vfilers on separate VLAN segments.&nbsp; None of the segments have access to the main FAS controller.&nbsp; Our goal is to use Snapdrive with RBAC so we setup an Ops Mgr server on one of the vlan segments. </P><P></P><P>The client system has access to the vfiler and the Ops Mgr system.&nbsp; Plus basic snapdrive works with the vfiler.&nbsp;&nbsp; But Ops Mgr can not register the vfiler as a host unless it has access to the FAS controller.</P><P></P><P>Is there anyway to make this work?&nbsp;&nbsp;&nbsp;&nbsp; </P></BODY></HTML> Thu, 05 Jun 2025 07:00:50 GMT https://community.netapp.com/t5/Data-Protection/vfiler-only-access-for-Ops-Mgr/m-p/2523#M8918 kutner 2025-06-05T07:00:50Z Re: vfiler only access for Ops Mgr https://community.netapp.com/t5/Data-Protection/vfiler-only-access-for-Ops-Mgr/m-p/2527#M8919 <HTML><HEAD></HEAD><BODY><P>No, I don't think this will work. The OpsMgr server depends on being able to contact the physical filer and will not operate properly if it only has access to a vfiler unit address. You will need to put the OpsMgr server on a VLAN with access to the physical system and create a tunnel from the vfiler VLANs to the management VLAN.</P></BODY></HTML> Thu, 03 Feb 2011 16:34:07 GMT https://community.netapp.com/t5/Data-Protection/vfiler-only-access-for-Ops-Mgr/m-p/2527#M8919 smoot 2011-02-03T16:34:07Z