topic Re: -data-protocol can only be set at interface create, not modify in ONTAP Discussions

data-protocol can only be set at interface create, not modify

scottgelb — Wed, 29 Apr 2015 18:45:45 GMT

any future changes planned for this? A customer wanted to make changes and have to destroy and recreate interfaces... anyone know why this was locked down to create only?

[-data-protocol {nfs|cifs|iscsi|fcp|fcache|none}, ...] - Data Protocol

Use this parameter to specify the list of data protocols that can be configured on the logical interface. The

supported protocols are NFS, CIFS, FlexCache, iSCSI, and FCP. NFS, CIFS, and FlexCache are available

by default when you create a logical interface. If you specify "none", the logical interface does not support

any data protocols. Also, none, iscsi, or fcp cannot be combined with any other protocols.

Note:

The data-protocol field must be specified when the logical interface is created and cannot be modified later.

Re: -data-protocol can only be set at interface create, not modify

mrinal — Wed, 13 Feb 2013 21:51:22 GMT

Hi Scott,

This change request is being tracked via Bug 520851. http://support.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=520851. We do not have a public report for this bug at this point in time.

Re: -data-protocol can only be set at interface create, not modify

scottgelb — Wed, 13 Feb 2013 21:54:11 GMT

Can't view it like you said... hopefully added in with 8.2 soon.

Re: -data-protocol can only be set at interface create, not modify

systems — Wed, 13 Mar 2013 19:18:29 GMT

Just ran into this. Our interfaces were created originally with just nfs but we just discovered some cifs use as well. I can't go back in and modify it. Unfortunately we already have a lot of production service on the interface. Were putting a work around in place now hoping for something in a later release.

Re: -data-protocol can only be set at interface create, not modify

scottgelb — Wed, 13 Mar 2013 19:25:31 GMT

Did you create new lifs on the same physical ports?

Sent from my iPhone 5

Re: -data-protocol can only be set at interface create, not modify

systems — Wed, 13 Mar 2013 19:28:54 GMT

Were moving the traffic to another network (a different vlan on the same physical ports) that does have cifs configured.

Re: -data-protocol can only be set at interface create, not modify

VMUNOZ_NTT — Thu, 14 Mar 2013 23:15:35 GMT

Maybe you can use dns-zones as workaround. Of course, clients should access the vserver over domain name instead of IP, but the LIF migration will be transparent for clients.

Re: -data-protocol can only be set at interface create, not modify

yaronh — Thu, 16 Apr 2015 16:17:34 GMT

Just stumbled on this as well.

Running CDOT 8.3.

I needed to move an ISCSI data LIF from data role with ISCSI protocol to mgmt role and none protocol so I can use the LIF with SDW.

Not that familiar if there's another way to do it - Eventually I dropped the LIF and recreated it.

Re: data-protocol can only be set at interface create, not modify

balaji_itility — Mon, 26 Oct 2015 11:03:15 GMT

Hello

has there been any update to this - can we still change the data protocols on the iSCSI lifs without having the need to destroy and recreate them again?

Balaji

Re: data-protocol can only be set at interface create, not modify

RajeshK — Fri, 06 May 2016 10:26:25 GMT

We have the same issue ,Running on Cluster data ontap 3.1 , still not able to modify the data protocol on the lif . Currently cifs is enabled , would like to add nfs also , But dont see any option....Need help..

Re: data-protocol can only be set at interface create, not modify

renek — Wed, 01 Jun 2016 13:40:38 GMT

we also ran into this running CDOT 8.3... i've chosen to re-create the lif's (during off-peak hours so the impact is minimal, paste both commands via CLI)

network interface delete -vserver SVM002 -lif dataLif_App1
network interface create -vserver SVM002 -lif dataLif_App1 -role data -data-protocol nfs,cifs -home-node SVM002 -home-port e0a-5 -address 172.16.0.5 -netmask 255.255.255.0

Re: data-protocol can only be set at interface create, not modify

tazinblack — Fri, 25 May 2018 07:55:24 GMT

I have the same problem here on 9.1.

Since this is known for some years now it would be nice to hear from NetApp if this behaviour will be modified in future releases.

Re: data-protocol can only be set at interface create, not modify

phlp_snntg — Thu, 11 Apr 2024 09:31:44 GMT

are there plans to solve this issue?

Re: data-protocol can only be set at interface create, not modify

Ashun — Wed, 23 Oct 2024 02:55:29 GMT

Yes, this is still the case in the current version, which needs to be specified at creation time and cannot be modified after creation
[-data-protocol {nfs|cifs|iscsi|fcp|fcache|none}, ...] - Data Protocol