Error: Qtree is not the source of the destination.

WEATHERFORD — Thu, 05 Jun 2025 06:38:17 GMT

Hi,

- I have several remote office need to be backup to Netapp filer using the OSSV, due to slow connectivity we decided to use LREP to transfer the data to a USB HDD.

below is the command i use:-

- lrep_reader.exe -p snapvault_start -f APSGNA -q /vol/site1/brkbews -o D:\brkbews@0 -l reader.log brkbews:d:\

- After the LREP is done we bring the USB HDD back to main office and connect it to a Windows server (NAOM) and use "LREP_WRITER Y:\brkbews\brkbews" to read the data from the USB disk.

- Then I perform the command below to create a new volume call "Site1" start the snapvault relationship

- Create new volume:- "vol create site1 SATAaggr 500g"

Start the transfer to Netapp:- "Snapvault start -S NAOM:y:\brkbews APSGNA:/vol/site1/brkbews"

- After the base has been migrated then i use command "snapvault modify -S brkbews:d:\ APSGNA:/vol/site1/brkbews" to change the source path to our remote office

But I getting this error "Qtree is not the source for the destination"

Is there anyway i can change the Source for the Qtree and the command i use is wrong? Appreciate your help... Thank you

Re: Error: Qtree is not the source of the destination.

stsadmin — Fri, 06 Jan 2012 11:00:14 GMT

Sounds like the Snavault relationship may have been removed on the source. What is the output from the command "SnapVault status" on the source machine?

Error: Qtree is not the source of the destination.

WEATHERFORD — Thu, 16 Feb 2012 02:53:27 GMT

Thanks for reply. Problem solve after we redo the LREP process.

topic Error: Qtree is not the source of the destination. in ONTAP Discussions

Error: Qtree is not the source of the destination.

Re: Error: Qtree is not the source of the destination.

Error: Qtree is not the source of the destination.