topic Re: To Configure SNMP alerts in ONTAP Discussions https://community.netapp.com/t5/ONTAP-Discussions/To-Configure-SNMP-alerts/m-p/67239#M15677 <HTML><HEAD></HEAD><BODY><P>7mode or cDOT?</P><P></P><P>7mode snmp command:</P><P></P><P>snmp community add ro xxxx (what ever you want)</P><P>snmp community delete ro xxxx (if you want to get rid of the default)</P><P>snmp contact "contact information"</P><P>snmp location "location of cabinet"</P><P>snmp traphost add hostname|ip address</P><P>snmp init 1 (to enable it)</P></BODY></HTML> Tue, 21 Jan 2014 19:08:24 GMT bbjholcomb 2014-01-21T19:08:24Z To Configure SNMP alerts https://community.netapp.com/t5/ONTAP-Discussions/To-Configure-SNMP-alerts/m-p/67234#M15676 <HTML><HEAD></HEAD><BODY><P>Hello Team,</P><P></P><P>I am newbee to NetApp, and would need assistance with the configuration for SNMP traps/alerts.</P><P></P><P>I am aware of the autosupport configuration, but we are not planning to configure it now. However, we wanted to know if there is any option to set the SNMP traps on the NetApp filer so that any hardware/software failure occurs, then we could get an email/sms alert.</P><P></P><P>Assistance is apprciated. Thanks.</P><P></P><P>Warm Regards</P></BODY></HTML> Thu, 05 Jun 2025 05:45:24 GMT https://community.netapp.com/t5/ONTAP-Discussions/To-Configure-SNMP-alerts/m-p/67234#M15676 RAJIV_NAIR 2025-06-05T05:45:24Z Re: To Configure SNMP alerts https://community.netapp.com/t5/ONTAP-Discussions/To-Configure-SNMP-alerts/m-p/67239#M15677 <HTML><HEAD></HEAD><BODY><P>7mode or cDOT?</P><P></P><P>7mode snmp command:</P><P></P><P>snmp community add ro xxxx (what ever you want)</P><P>snmp community delete ro xxxx (if you want to get rid of the default)</P><P>snmp contact "contact information"</P><P>snmp location "location of cabinet"</P><P>snmp traphost add hostname|ip address</P><P>snmp init 1 (to enable it)</P></BODY></HTML> Tue, 21 Jan 2014 19:08:24 GMT https://community.netapp.com/t5/ONTAP-Discussions/To-Configure-SNMP-alerts/m-p/67239#M15677 bbjholcomb 2014-01-21T19:08:24Z Re: To Configure SNMP alerts https://community.netapp.com/t5/ONTAP-Discussions/To-Configure-SNMP-alerts/m-p/67244#M15678 <HTML><HEAD></HEAD><BODY><P>Thank you for the information buddy...</P><P>Yes, its a 7-Mode version.</P><P></P><P>What I have read from the document is that it uses UDP ports - 161 n 162 for communication. So is there any other port apart from 161 n 162 its uses so that the firewall team be informed about it ???</P><P></P><P>Warm Regards</P></BODY></HTML> Wed, 22 Jan 2014 12:54:25 GMT https://community.netapp.com/t5/ONTAP-Discussions/To-Configure-SNMP-alerts/m-p/67244#M15678 RAJIV_NAIR 2014-01-22T12:54:25Z