topic Re: FC - Sync Snapmirror - switch support in ONTAP Discussions https://community.netapp.com/t5/ONTAP-Discussions/FC-Sync-Snapmirror-switch-support/m-p/68311#M15934 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Is the dedicated card you mention the same as Qlogic FC-VI card? Also, what interop mode are the Brocade switches in? Output from the 'interopmode' from the Brocade switches would help. Thanks</P><P>Srinath</P></BODY></HTML> Thu, 19 Aug 2010 17:35:08 GMT alapati 2010-08-19T17:35:08Z FC - Sync Snapmirror - switch support https://community.netapp.com/t5/ONTAP-Discussions/FC-Sync-Snapmirror-switch-support/m-p/68306#M15932 <HTML><HEAD></HEAD><BODY><P>Folks,</P><P></P><P>I'm having little luck going through the official channels for this and could do with a hand.</P><P></P><P>I have a customer planning to run Sync Snapmirror using dedicated FC cards using IBM SAN40's (Brocade 5100s). Although I can find supported levels of code for this switch, I can find no docunmentation about supported modes.</P><P></P><P>The SAN40's will be core - but also connecting to McData switches on the edge. As such, they will be placed in to interop mode. Synchronous Snapmirror operations will only ever operate through the SAN40's - but is it supported in interoperability mode?</P><P></P><P>Any info appreciated.</P></BODY></HTML> Thu, 05 Jun 2025 07:10:36 GMT https://community.netapp.com/t5/ONTAP-Discussions/FC-Sync-Snapmirror-switch-support/m-p/68306#M15932 dan_keating 2025-06-05T07:10:36Z Re: FC - Sync Snapmirror - switch support https://community.netapp.com/t5/ONTAP-Discussions/FC-Sync-Snapmirror-switch-support/m-p/68311#M15934 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Is the dedicated card you mention the same as Qlogic FC-VI card? Also, what interop mode are the Brocade switches in? Output from the 'interopmode' from the Brocade switches would help. Thanks</P><P>Srinath</P></BODY></HTML> Thu, 19 Aug 2010 17:35:08 GMT https://community.netapp.com/t5/ONTAP-Discussions/FC-Sync-Snapmirror-switch-support/m-p/68311#M15934 alapati 2010-08-19T17:35:08Z